[PATCH v5 2/8] net: stmmac: qcom-ethqos: use generic device properties
From: Bartosz Golaszewski <hidden>
Date: 2025-11-07 10:30:11
Also in:
imx, linux-amlogic, linux-arm-msm, linux-devicetree, linux-mips, linux-renesas-soc, linux-riscv, linux-rockchip, linux-sunxi, lkml
Subsystem:
networking drivers, qualcomm ethqos ethernet driver, stmmac ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Mohd Ayaan Anwar, Linus Torvalds
From: Bartosz Golaszewski <redacted> In order to drop the dependency on CONFIG_OF, convert all device property getters from OF-specific to generic device properties and stop pulling in any linux/of.h symbols. Signed-off-by: Bartosz Golaszewski <redacted> --- drivers/net/ethernet/stmicro/stmmac/Kconfig | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 9 ++++----- 2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 87c5bea6c2a243f3be998b2c3935bc1dc23bfe22..22d0eaab35eaffac0bca58f8625ecc5c955b6631 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig@@ -135,7 +135,7 @@ config DWMAC_MESON config DWMAC_QCOM_ETHQOS tristate "Qualcomm ETHQOS support" default ARCH_QCOM - depends on OF && (ARCH_QCOM || COMPILE_TEST) + depends on ARCH_QCOM || COMPILE_TEST help Support for the Qualcomm ETHQOS core.
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 1a616a71c36ace29a74a0aa23fc8173443aa49a5..8578a2df8cf0d1d8808bcf7e7b57c93eb14c87db 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c@@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2018-19, Linaro Limited +#include <linux/mod_devicetable.h> #include <linux/module.h> -#include <linux/of.h> #include <linux/of_net.h> #include <linux/platform_device.h> #include <linux/phy.h>
@@ -748,7 +748,6 @@ static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv) static int qcom_ethqos_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; const struct ethqos_emac_driver_data *data; struct plat_stmmacenet_data *plat_dat; struct stmmac_resources stmmac_res;
@@ -799,7 +798,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev) ethqos->mac_base = stmmac_res.addr; - data = of_device_get_match_data(dev); + data = device_get_match_data(dev); ethqos->por = data->por; ethqos->num_por = data->num_por; ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
@@ -836,9 +835,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev) if (ethqos->has_emac_ge_3) plat_dat->dwmac4_addrs = &data->dwmac4_addrs; plat_dat->pmt = 1; - if (of_property_read_bool(np, "snps,tso")) + if (device_property_present(dev, "snps,tso")) plat_dat->flags |= STMMAC_FLAG_TSO_EN; - if (of_device_is_compatible(np, "qcom,qcs404-ethqos")) + if (device_is_compatible(dev, "qcom,qcs404-ethqos")) plat_dat->flags |= STMMAC_FLAG_RX_CLK_RUNS_IN_LPI; if (data->dma_addr_width) plat_dat->host_dma_width = data->dma_addr_width;
--
2.51.0