[PATCH] dt-bindings: Fix inconsistent quoting
From: "Rob Herring (Arm)" <robh@kernel.org>
Date: 2025-10-15 23:20:37
Also in:
linux-arm-kernel, linux-clk, linux-devicetree, linux-gpio, linux-iio, linux-media, linux-pci, linux-phy, lkml
Subsystem:
analog devices inc iio drivers, arm/qualcomm mailing list, common clk framework, generic phy framework, gpio subsystem, iio subsystem and drivers, ltc2983 iio temperature driver, mailbox api, media input infrastructure (v4l/dvb), microchip soc drivers, multifunction devices (mfd), networking drivers, networking [dsa], open firmware and flattened device tree bindings, pci driver for plda pcie ip, pci native host bridge and endpoint drivers, pci subsystem, pin control subsystem, pin controller - qualcomm, pin controller - renesas, synopsys designware apb gpio driver, the rest · Maintainers:
Nuno Sá, Michael Hennerich, Michael Turquette, Stephen Boyd, Vinod Koul, Linus Walleij, Bartosz Golaszewski, Jonathan Cameron, Jassi Brar, Mauro Carvalho Chehab, Conor Dooley, Lee Jones, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Daire McNamara, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Bjorn Andersson, Geert Uytterhoeven, Hoan Tran, Linus Torvalds
yamllint has gained a new check which checks for inconsistent quoting (mixed " and ' quotes within a file). Fix all the cases yamllint found so we can enable the check (once the check is in a release). Use whichever quoting is dominate in the file. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> --- .../arm/altera/socfpga-clk-manager.yaml | 4 ++-- .../bindings/clock/nvidia,tegra124-car.yaml | 8 ++++---- .../bindings/clock/nvidia,tegra20-car.yaml | 6 +++--- .../devicetree/bindings/gpio/gpio-mxs.yaml | 9 +++++---- .../bindings/gpio/snps,dw-apb-gpio.yaml | 4 ++-- .../bindings/iio/temperature/adi,ltc2983.yaml | 20 +++++++++---------- .../mailbox/qcom,apcs-kpss-global.yaml | 16 +++++++-------- .../mailbox/xlnx,zynqmp-ipi-mailbox.yaml | 2 +- .../bindings/media/fsl,imx6q-vdoa.yaml | 2 +- .../devicetree/bindings/mfd/aspeed-lpc.yaml | 4 ++-- .../devicetree/bindings/mfd/ti,twl.yaml | 4 ++-- .../bindings/net/ethernet-switch.yaml | 2 +- .../pci/plda,xpressrich3-axi-common.yaml | 2 +- .../bindings/phy/motorola,cpcap-usb-phy.yaml | 4 ++-- .../pinctrl/microchip,sparx5-sgpio.yaml | 12 +++++------ .../bindings/pinctrl/qcom,pmic-gpio.yaml | 10 +++++----- .../bindings/pinctrl/qcom,pmic-mpp.yaml | 6 +++--- .../bindings/pinctrl/renesas,pfc.yaml | 4 ++-- .../bindings/pinctrl/renesas,rza1-ports.yaml | 2 +- .../pinctrl/renesas,rzg2l-pinctrl.yaml | 2 +- .../pinctrl/renesas,rzv2m-pinctrl.yaml | 2 +- .../bindings/power/renesas,sysc-rmobile.yaml | 4 ++-- .../soc/microchip/atmel,at91rm9200-tcb.yaml | 8 ++++---- .../soc/tegra/nvidia,tegra20-pmc.yaml | 12 +++++------ 24 files changed, 75 insertions(+), 74 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
index a758f4bb2bb3..275554bfedce 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml@@ -39,7 +39,7 @@ properties: "^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$": type: object - $ref: '#/$defs/clock-props' + $ref: "#/$defs/clock-props" unevaluatedProperties: false properties:
@@ -67,7 +67,7 @@ properties: patternProperties: "^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$": type: object - $ref: '#/$defs/clock-props' + $ref: "#/$defs/clock-props" unevaluatedProperties: false properties:
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
index a9ba21144a56..13bb616249a1 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml@@ -37,7 +37,7 @@ properties: '#clock-cells': const: 1 - "#reset-cells": + '#reset-cells': const: 1 nvidia,external-memory-controller:
@@ -46,7 +46,7 @@ properties: phandle of the external memory controller node patternProperties: - "^emc-timings-[0-9]+$": + '^emc-timings-[0-9]+$': type: object properties: nvidia,ram-code:
@@ -56,7 +56,7 @@ patternProperties: this timing set is used for patternProperties: - "^timing-[0-9]+$": + '^timing-[0-9]+$': type: object properties: clock-frequency:
@@ -94,7 +94,7 @@ required: - compatible - reg - '#clock-cells' - - "#reset-cells" + - '#reset-cells' additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
index bee2dd4b29bf..73cccc0df424 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml@@ -39,11 +39,11 @@ properties: '#clock-cells': const: 1 - "#reset-cells": + '#reset-cells': const: 1 patternProperties: - "^(sclk)|(pll-[cem])$": + '^(sclk)|(pll-[cem])$': type: object properties: compatible:
@@ -76,7 +76,7 @@ required: - compatible - reg - '#clock-cells' - - "#reset-cells" + - '#reset-cells' additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
index aaf97124803f..4b5b8e794613 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml@@ -26,9 +26,10 @@ properties: # Devices. Keep it as it to be compatible existed dts files. - const: simple-bus - '#address-cells': + "#address-cells": const: 1 - '#size-cells': + + "#size-cells": const: 0 reg:
@@ -132,8 +133,8 @@ patternProperties: required: - compatible - reg - - '#address-cells' - - '#size-cells' + - "#address-cells" + - "#size-cells" additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
index ab2afc0e4153..bba6f5b6606f 100644
--- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml@@ -111,8 +111,8 @@ additionalProperties: false required: - compatible - reg - - "#address-cells" - - "#size-cells" + - '#address-cells' + - '#size-cells' examples: - |
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index 312febeeb3bb..ee0b558bb866 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml@@ -88,7 +88,7 @@ properties: const: 0 patternProperties: - "^thermocouple@": + '^thermocouple@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false
@@ -146,7 +146,7 @@ patternProperties: required: - adi,custom-thermocouple - "^diode@": + '^diode@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false
@@ -191,7 +191,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 default: 0 - "^rtd@": + '^rtd@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: RTD sensor.
@@ -280,7 +280,7 @@ patternProperties: type: boolean dependencies: - adi,current-rotate: [ "adi,rsense-share" ] + adi,current-rotate: [ 'adi,rsense-share' ] - if: properties:
@@ -290,7 +290,7 @@ patternProperties: required: - adi,custom-rtd - "^thermistor@": + '^thermistor@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Thermistor sensor.
@@ -364,7 +364,7 @@ patternProperties: - adi,rsense-handle dependencies: - adi,current-rotate: [ "adi,rsense-share" ] + adi,current-rotate: [ 'adi,rsense-share' ] allOf: - if:
@@ -392,7 +392,7 @@ patternProperties: required: - adi,custom-thermistor - "^adc@": + '^adc@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Direct ADC sensor.
@@ -407,7 +407,7 @@ patternProperties: description: Whether the sensor is single-ended. type: boolean - "^temp@": + '^temp@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Active analog temperature sensor.
@@ -437,7 +437,7 @@ patternProperties: required: - adi,custom-temp - "^rsense@": + '^rsense@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Sense resistor sensor.
@@ -476,7 +476,7 @@ allOf: - adi,ltc2984 then: patternProperties: - "^temp@": false + '^temp@': false examples: - |
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index 615ed103b7e6..f40dc9048327 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml@@ -187,10 +187,10 @@ allOf: enum: - qcom,msm8916-apcs-kpss-global then: - $ref: "#/$defs/msm8916-apcs-clock-controller" + $ref: '#/$defs/msm8916-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/msm8916-apcs-clock-controller" + $ref: '#/$defs/msm8916-apcs-clock-controller' - if: properties:
@@ -199,10 +199,10 @@ allOf: enum: - qcom,msm8939-apcs-kpss-global then: - $ref: "#/$defs/msm8939-apcs-clock-controller" + $ref: '#/$defs/msm8939-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/msm8939-apcs-clock-controller" + $ref: '#/$defs/msm8939-apcs-clock-controller' - if: properties:
@@ -211,10 +211,10 @@ allOf: enum: - qcom,sdx55-apcs-gcc then: - $ref: "#/$defs/sdx55-apcs-clock-controller" + $ref: '#/$defs/sdx55-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/sdx55-apcs-clock-controller" + $ref: '#/$defs/sdx55-apcs-clock-controller' - if: properties:
@@ -223,10 +223,10 @@ allOf: enum: - qcom,ipq6018-apcs-apps-global then: - $ref: "#/$defs/ipq6018-apcs-clock-controller" + $ref: '#/$defs/ipq6018-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/ipq6018-apcs-clock-controller" + $ref: '#/$defs/ipq6018-apcs-clock-controller' - if: properties:
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
index fe83b5cb1278..04d6473d666f 100644
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml@@ -142,7 +142,7 @@ patternProperties: - compatible - reg - reg-names - - "#mbox-cells" + - '#mbox-cells' - xlnx,ipi-id required:
diff --git a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
index 511ac0d67a7f..988a5b3a62bd 100644
--- a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
+++ b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml@@ -16,7 +16,7 @@ maintainers: properties: compatible: - const: "fsl,imx6q-vdoa" + const: fsl,imx6q-vdoa reg: maxItems: 1
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
index f329223cec07..0adfeef149e7 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml@@ -111,12 +111,12 @@ patternProperties: reg: maxItems: 1 - '#reset-cells': + "#reset-cells": const: 1 required: - compatible - - '#reset-cells' + - "#reset-cells" "^lpc-snoop@[0-9a-f]+$": type: object
diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml
index 776b04e182cb..1611b1581a8e 100644
--- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml@@ -400,7 +400,7 @@ properties: - '#pwm-cells' patternProperties: - "^regulator-": + '^regulator-': type: object unevaluatedProperties: false $ref: /schemas/regulator/regulator.yaml
@@ -429,7 +429,7 @@ required: - reg - interrupts - interrupt-controller - - "#interrupt-cells" + - '#interrupt-cells' examples: - |
diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
index b3b7e1a1b127..03001ba40e0f 100644
--- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml@@ -72,7 +72,7 @@ additionalProperties: true $defs: ethernet-ports: description: An ethernet switch without any extra port properties - $ref: '#' + $ref: "#" patternProperties: "^(ethernet-)?ports$":
diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
index 039eecdbd6aa..fe2e8beb5bab 100644
--- a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml
+++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml@@ -72,7 +72,7 @@ required: - reg-names - interrupts - msi-controller - - "#interrupt-cells" + - '#interrupt-cells' - interrupt-map-mask - interrupt-map
diff --git a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
index 0febd04a61f4..dd345cbd0a0b 100644
--- a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml@@ -67,8 +67,8 @@ properties: mode-gpios: description: Optional GPIOs for configuring alternate modes items: - - description: "mode selection GPIO #0" - - description: "mode selection GPIO #1" + - description: mode selection GPIO#0 + - description: mode selection GPIO#1 required: - compatible
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
index 0df4e114fdd6..fa47732d7cef 100644
--- a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml@@ -18,7 +18,7 @@ description: | properties: $nodename: - pattern: "^gpio@[0-9a-f]+$" + pattern: '^gpio@[0-9a-f]+$' compatible: enum:
@@ -26,10 +26,10 @@ properties: - mscc,ocelot-sgpio - mscc,luton-sgpio - "#address-cells": + '#address-cells': const: 1 - "#size-cells": + '#size-cells': const: 0 reg:
@@ -76,7 +76,7 @@ properties: - const: switch patternProperties: - "^gpio@[0-1]$": + '^gpio@[0-1]$': type: object properties: compatible:
@@ -132,8 +132,8 @@ required: - reg - clocks - microchip,sgpio-port-ranges - - "#address-cells" - - "#size-cells" + - '#address-cells' + - '#size-cells' examples: - |
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 5e6dfcc3fe9b..6632bcd037ba 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml@@ -424,13 +424,13 @@ allOf: patternProperties: '-state$': oneOf: - - $ref: "#/$defs/qcom-pmic-gpio-state" + - $ref: '#/$defs/qcom-pmic-gpio-state' - patternProperties: - "(pinconf|-pins)$": - $ref: "#/$defs/qcom-pmic-gpio-state" + '(pinconf|-pins)$': + $ref: '#/$defs/qcom-pmic-gpio-state' additionalProperties: false - "-hog(-[0-9]+)?$": + '-hog(-[0-9]+)?$': type: object required: - gpio-hog
@@ -503,7 +503,7 @@ $defs: - gpio1-gpio12 for pmxr2230 items: - pattern: "^gpio([0-9]+)$" + pattern: '^gpio([0-9]+)$' function: items:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 9364ae05f3e6..daf4c1c03712 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml@@ -74,10 +74,10 @@ required: patternProperties: '-state$': oneOf: - - $ref: "#/$defs/qcom-pmic-mpp-state" + - $ref: '#/$defs/qcom-pmic-mpp-state' - patternProperties: '-pins$': - $ref: "#/$defs/qcom-pmic-mpp-state" + $ref: '#/$defs/qcom-pmic-mpp-state' additionalProperties: false $defs:
@@ -100,7 +100,7 @@ $defs: - mpp1-mpp4 for pma8084 items: - pattern: "^mpp([0-9]+)$" + pattern: '^mpp([0-9]+)$' function: items:
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
index cfe004573366..ab1cfe9dcde5 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml@@ -129,7 +129,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' examples: - |
@@ -190,7 +190,7 @@ examples: sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; + function = "sdhi0'; power-source = <3300>; }; };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
index 2bd7d47d0fdb..737eb4e14090 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml@@ -118,7 +118,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' examples: - |
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index 5156d54b240b..00c05243b9a4 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml@@ -135,7 +135,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' allOf: - $ref: pinctrl.yaml#
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
index 5fa5d31f8866..88b2fa5e684d 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml@@ -88,7 +88,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' allOf: - $ref: pinctrl.yaml#
diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
index fba6914ec40d..948a9da111df 100644
--- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml@@ -45,7 +45,7 @@ properties: const: 0 additionalProperties: - $ref: "#/$defs/pd-node" + $ref: '#/$defs/pd-node' required: - compatible
@@ -83,7 +83,7 @@ $defs: - '#power-domain-cells' additionalProperties: - $ref: "#/$defs/pd-node" + $ref: '#/$defs/pd-node' examples: - |
diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
index 2c7275c4503b..abf1adca0773 100644
--- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
+++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml@@ -57,7 +57,7 @@ properties: const: 0 patternProperties: - "^timer@[0-2]$": + '^timer@[0-2]$': description: The timer block channels that are used as timers or counters. type: object additionalProperties: false
@@ -80,7 +80,7 @@ patternProperties: - compatible - reg - "^pwm@[0-2]$": + '^pwm@[0-2]$': description: The timer block channels that are used as PWMs. $ref: /schemas/pwm/pwm.yaml# type: object
@@ -92,7 +92,7 @@ patternProperties: TCB channel to use for this PWM. enum: [ 0, 1, 2 ] - "#pwm-cells": + '#pwm-cells': description: The only third cell flag supported by this binding is PWM_POLARITY_INVERTED.
@@ -101,7 +101,7 @@ patternProperties: required: - compatible - reg - - "#pwm-cells" + - '#pwm-cells' additionalProperties: false
diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
index 7140c312d898..f516960dbbef 100644
--- a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
+++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml@@ -133,12 +133,12 @@ properties: property. The supported-hw is a bitfield indicating SoC speedo or process ID mask. - "#power-domain-cells": + '#power-domain-cells': const: 0 required: - operating-points-v2 - - "#power-domain-cells" + - '#power-domain-cells' i2c-thermtrip: type: object
@@ -220,7 +220,7 @@ properties: xusbc USB Partition C Tegra114/124/210 patternProperties: - "^[a-z0-9]+$": + '^[a-z0-9]+$': type: object additionalProperties: false properties:
@@ -365,9 +365,9 @@ allOf: additionalProperties: false dependencies: - nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] - nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"] - nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"] + nvidia,suspend-mode: ['nvidia,core-pwr-off-time', 'nvidia,cpu-pwr-off-time'] + nvidia,core-pwr-off-time: ['nvidia,core-pwr-good-time'] + nvidia,cpu-pwr-off-time: ['nvidia,cpu-pwr-good-time'] examples: - |
--
2.51.0