Assign netdev.dev_port based on the device channel index, to indicate the
port number of the network device.
While this driver already uses netdev.dev_id for that purpose, dev_port is
more appropriate. However, retain dev_id to avoid potential regressions.

Fixes: 3e66d0138c05 ("can: populate netdev::dev_id for udev discrimination")
Reviewed-by: Vincent Mailhol <redacted>
Signed-off-by: Jimmy Assarsson <redacted>
---
Changes in v3:
  - Add tag Reviewed-by Vincent Mailhol

 drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
index c74875f978c4..7be8604bf760 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c

@@ -878,6 +878,7 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)
 	netdev->ethtool_ops = &kvaser_usb_ethtool_ops;
 	SET_NETDEV_DEV(netdev, &dev->intf->dev);
 	netdev->dev_id = channel;
+	netdev->dev_port = channel;
 
 	dev->nets[channel] = priv;
 

-- 
2.49.0