This patch series simplifies the process of identifying which network
interface (can0..canX) corresponds to which physical CAN channel on
Kvaser USB based CAN interfaces.

Note that this patch series is based on [1]
"can: kvaser_pciefd: Simplify identification of physical CAN interfaces"

Changes in v3:
  - Fix GCC compiler array warning (-Warray-bounds)
  - Fix transient Sparse warning
  - Add tag Reviewed-by Vincent Mailhol

Changes in v2:
  - New patch with devlink documentation
  - New patch assigning netdev.dev_port
  - Formatting and refactoring

[1] https://lore.kernel.org/linux-can/20250725123230.8-1-extja@kvaser.com (local)

Jimmy Assarsson (11):
  can: kvaser_usb: Add support to control CAN LEDs on device
  can: kvaser_usb: Add support for ethtool set_phys_id()
  can: kvaser_usb: Assign netdev.dev_port based on device channel index
  can: kvaser_usb: Add intermediate variables
  can: kvaser_usb: Move comment regarding max_tx_urbs
  can: kvaser_usb: Store the different firmware version components in a
    struct
  can: kvaser_usb: Store additional device information
  can: kvaser_usb: Add devlink support
  can: kvaser_usb: Expose device information via devlink info_get()
  can: kvaser_usb: Add devlink port support
  Documentation: devlink: add devlink documentation for the kvaser_usb
    driver

 Documentation/networking/devlink/index.rst    |   1 +
 .../networking/devlink/kvaser_usb.rst         |  33 +++++
 drivers/net/can/usb/Kconfig                   |   1 +
 drivers/net/can/usb/kvaser_usb/Makefile       |   2 +-
 drivers/net/can/usb/kvaser_usb/kvaser_usb.h   |  33 ++++-
 .../net/can/usb/kvaser_usb/kvaser_usb_core.c  | 139 +++++++++++++-----
 .../can/usb/kvaser_usb/kvaser_usb_devlink.c   |  87 +++++++++++
 .../net/can/usb/kvaser_usb/kvaser_usb_hydra.c |  65 +++++++-
 .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c  |  75 +++++++++-
 9 files changed, 388 insertions(+), 48 deletions(-)
 create mode 100644 Documentation/networking/devlink/kvaser_usb.rst
 create mode 100644 drivers/net/can/usb/kvaser_usb/kvaser_usb_devlink.c

-- 
2.49.0