Re: [PATCH net-next 1/3] net: phy: qcom: Add PHY counter support

+static const struct qcom_phy_hw_stat qcom_phy_hw_stats[] = {
+	{
+		.string		= "phy_rx_good_frame",
+		.devad		= MDIO_MMD_AN,
+		.cnt_31_16_reg	= QCA808X_MMD7_CNT_RX_GOOD_CRC_31_16,
+		.cnt_15_0_reg	= QCA808X_MMD7_CNT_RX_GOOD_CRC_15_0,
+	},
+	{
+		.string		= "phy_rx_bad_frame",
+		.devad		= MDIO_MMD_AN,
+		.cnt_31_16_reg	= 0xffff,
+		.cnt_15_0_reg	= QCA808X_MMD7_CNT_RX_BAD_CRC,
+	},
+	{
+		.string		= "phy_tx_good_frame",
+		.devad		= MDIO_MMD_AN,
+		.cnt_31_16_reg	= QCA808X_MMD7_CNT_TX_GOOD_CRC_31_16,
+		.cnt_15_0_reg	= QCA808X_MMD7_CNT_TX_GOOD_CRC_15_0,
+	},
+	{
+		.string		= "phy_tx_bad_frame",
+		.devad		= MDIO_MMD_AN,

Are there any counters which might be added later which are not in
MDIO_MMD_AN? It seems pointless having this if it is fixed.

+		.cnt_31_16_reg	= 0xffff,
+		.cnt_15_0_reg	= QCA808X_MMD7_CNT_TX_BAD_CRC,
+	},
+};

There has been an attempt to try to standardise PHY statistics. Please
look at:

**
 * struct ethtool_phy_stats - PHY-level statistics counters
 * @rx_packets: Total successfully received frames
 * @rx_bytes: Total successfully received bytes
 * @rx_errors: Total received frames with errors (e.g., CRC errors)
 * @tx_packets: Total successfully transmitted frames
 * @tx_bytes: Total successfully transmitted bytes
 * @tx_errors: Total transmitted frames with errors
 *
 * This structure provides a standardized interface for reporting
 * PHY-level statistics counters. It is designed to expose statistics
 * commonly provided by PHYs but not explicitly defined in the IEEE
 * 802.3 standard.
 */
struct ethtool_phy_stats {
        u64 rx_packets;
        u64 rx_bytes;
        u64 rx_errors;
        u64 tx_packets;
        u64 tx_bytes;
        u64 tx_errors;
};

Please use this if possible.

    Andrew

---
pw-bot: cr