[PATCH net-next 2/3] net: phy: qcom: qca808x: Support PHY counter
From: Luo Jie <hidden>
Date: 2025-07-08 16:08:59
Also in:
linux-arm-msm, lkml
Subsystem:
arm/qualcomm mailing list, ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Enable CRC checking for received and transmitted frames within the config_init() function to support counter recording, and incorporate PHY counter operations. Signed-off-by: Luo Jie <redacted> --- drivers/net/phy/qcom/qca808x.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c
index 71498c518f0f..06967ce54036 100644
--- a/drivers/net/phy/qcom/qca808x.c
+++ b/drivers/net/phy/qcom/qca808x.c@@ -243,6 +243,10 @@ static int qca808x_config_init(struct phy_device *phydev) qca808x_fill_possible_interfaces(phydev); + ret = qcom_phy_counter_crc_check_en(phydev); + if (ret) + return ret; + /* Configure adc threshold as 100mv for the link 10M */ return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD, QCA808X_ADC_THRESHOLD_MASK,
@@ -651,6 +655,9 @@ static struct phy_driver qca808x_driver[] = { .led_hw_control_set = qca808x_led_hw_control_set, .led_hw_control_get = qca808x_led_hw_control_get, .led_polarity_set = qca808x_led_polarity_set, + .get_sset_count = qcom_phy_get_sset_count, + .get_strings = qcom_phy_get_strings, + .get_stats = qcom_phy_get_stats, }, }; module_phy_driver(qca808x_driver);
--
2.34.1