Re: [PATCH net v4 0/4] net: phy: bcm54811: Fix the PHY initialization
From: Florian Fainelli <florian.fainelli@broadcom.com>
Date: 2025-06-30 17:06:14
Also in:
linux-devicetree, lkml
On 6/30/25 06:58, Kamil Horák - 2N wrote:
PATCH 1 - Add MII-Lite PHY interface mode as defined by Broadcom for
their two-wire PHYs. It can be used with most Ethernet controllers
under certain limitations (no half-duplex link modes etc.).
PATCH 2 - Add MII-Lite PHY interface type
PATCH 3 - Activation of MII-Lite interface mode on Broadcom bcm5481x
PHYs
PATCH 4 - Fix the BCM54811 PHY initialization so that it conforms
to the datasheet regarding a reserved bit in the LRE Control
register, which must be written to zero after every device reset.
Also fix the LRE Status register reading, there is another bit to
be ignored on bcm54811.
Changes in v2:
- Applied reviewers' comments
- Divided into more patches (separated common and Broadcom
PHY specific code)
Changes in v3:
- Added MII-Lite documentation
Changes in v4:
- Added missing Fixes headersKamil, you posted your v4 less than 24 hrs after the v3, please don't do that per: https://www.kernel.org/doc/html/next/process/maintainer-netdev.html#updating-patch-status -- Florian