[PATCH net-next v3 07/14] phy:motorcomm: Add PHY_INTERFACE_MODE_INTERNAL to support YT6801
From: Frank Sae <Frank.Sae@motor-comm.com>
Date: 2025-02-28 10:05:58
Also in:
lkml
Subsystem:
ethernet phy library, motorcomm phy driver, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Frank, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
YT6801 NIC Integrated a PHY that is YT8531S, but it used GMII interface. Add a case of PHY_INTERFACE_MODE_INTERNAL to support YT6801. Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com> --- drivers/net/phy/motorcomm.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 0e91f5d1a..371acafd5 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c@@ -896,6 +896,12 @@ static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev) val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg) | FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg); break; + case PHY_INTERFACE_MODE_INTERNAL: + if (phydev->drv->phy_id != PHY_ID_YT8531S) + return -EOPNOTSUPP; + + phydev_info(phydev, "Integrated YT8531S phy of YT6801.\n"); + return 0; default: /* do not support other modes */ return -EOPNOTSUPP; }
--
2.34.1