Hi Russell,

On Wed, 26 Feb 2025 14:01:57 +0000
"Russell King (Oracle)" [off-list ref] wrote:

Please use a subject line of "net: phylink: " for phylink patches, not
"net: phy: " which is for phylib.

Sure thing, I wasn't sure about the subject line for this one.

On Wed, Feb 26, 2025 at 11:09:24AM +0100, Maxime Chevallier wrote:

quoted

When phylink creates a fixed-link configuration, it finds a matching
linkmode to set as the advertised, lp_advertising and supported modes
based on the speed and duplex of the fixed link.

Use the newly introduced phy_caps_lookup to get these modes instead of
phy_lookup_settings(). This has the side effect that the matched
settings and configured linkmodes may now contain several linkmodes (the
intersection of supported linkmodes from the phylink settings and the
linkmodes that match speed/duplex) instead of the one from
phy_lookup_settings().

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

[...]

quoted

@@ -879,8 +880,10 @@ static int phylink_parse_fixedlink(struct phylink *pl,
 	linkmode_copy(pl->link_config.advertising, pl->supported);
 	phylink_validate(pl, pl->supported, &pl->link_config);
 
-	s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex,
-			       pl->supported, true);
+	c = phy_caps_lookup(pl->link_config.speed, pl->link_config.duplex,
+			    pl->supported, true);
+	if (c)
+		linkmode_and(match, pl->supported, c->linkmodes);  

What's this for? Surely phy_caps_lookup() should not return a link mode
that wasn't in phy_caps_lookup()'s 3rd argument.

The new lookup may return a linkmode that wasn't in the 3rd argument,
as it will return ALL linkmodes that matched speed and duplex, provided
that at least one of said linkmodes matched the 3rd parameter.

Say you pass SPEED_1000, DUPLEX_FULL and a bitset containing only
1000BaseTFull, you'll get :

 - 1000BaseTFull, 1000BaseKX, 1000BaseT1, etc. in c->linkmodes.

That's the reason for re-andf'ing the modes afterwards.

If that API is too convoluted or error-prone, I can come up with an API
returning only what matched.

Maxime