Re: [PATCH iwl-net 0/4] igb: fix igb_msix_other() handling for PREEMPT_RT

On Tue, Jan 07, 2025 at 02:51:06PM +0100, Sebastian Andrzej Siewior wrote:

On 2024-12-04 08:42:23 [-0300], Wander Lairson Costa wrote:

quoted

This is the second attempt at fixing the behavior of igb_msix_other()
for PREEMPT_RT. The previous attempt [1] was reverted [2] following
concerns raised by Sebastian [3].

The initial approach proposed converting vfs_lock to a raw_spinlock,
a minor change intended to make it safe. However, it became evident
that igb_rcv_msg_from_vf() invokes kcalloc with GFP_ATOMIC,
which is unsafe in interrupt context on PREEMPT_RT systems.

To address this, the solution involves splitting igb_msg_task()
into two parts:

    * One part invoked from the IRQ context.
    * Another part called from the threaded interrupt handler.

To accommodate this, vfs_lock has been restructured into a double
lock: a spinlock_t and a raw_spinlock_t. In the revised design:

    * igb_disable_sriov() locks both spinlocks.
    * Each part of igb_msg_task() locks the appropriate spinlock for
    its execution context.

- Is this limited to PREEMPT_RT or does it also occur on PREEMPT systems
  with threadirqs? And if this is PREEMPT_RT only, why?

PREEMPT systems configured to use threadirqs should be affected as well,
although I never tested with this configuration. Honestly, until now I wasn't
aware of the possibility of a non PREEMPT_RT kernel with threaded IRQs by default.

- What causes the failure? I see you reworked into two parts to behave
  similar to what happens without threaded interrupts. There is still no
  explanation for it. Is there a timing limit or was there another
  register operation which removed the mailbox message?

I explained the root cause of the issue in the last commit. Maybe I should
have added the explanation to the cover letter as well.  Anyway, here is a
partial verbatim copy of it:

"During testing of SR-IOV, Red Hat QE encountered an issue where the
ip link up command intermittently fails for the igbvf interfaces when
using the PREEMPT_RT variant. Investigation revealed that
e1000_write_posted_mbx returns an error due to the lack of an ACK
from e1000_poll_for_ack.

The underlying issue arises from the fact that IRQs are threaded by
default under PREEMPT_RT. While the exact hardware details are not
available, it appears that the IRQ handled by igb_msix_other must
be processed before e1000_poll_for_ack times out. However,
e1000_write_posted_mbx is called with preemption disabled, leading
to a scenario where the IRQ is serviced only after the failure of
e1000_write_posted_mbx."

The call chain from igb_msg_task():

igb_msg_task
	igb_rcv_msg_from_vf
		igb_set_vf_multicasts
			igb_set_rx_mode
				igb_write_mc_addr_list
					kmalloc

Cannot happen from interrupt context under PREEMPT_RT. So this part of
the interrupt handler is deferred to a threaded IRQ handler.

quoted

Cheers,
Wander

Sebastian