[PATCH v3 2/5] wifi: wilc1000: Fold wilc_get_chipid() into wlan.c
flat view
STALE783d
From: Marek Vasut <marex@denx.de>
Date: 2024-08-27 16:41:34
Also in:
linux-devicetree, linux-wireless
Subsystem:
microchip wilc1000 wifi driver, the rest · Maintainers:
Ajay Singh, Claudiu Beznea, Linus Torvalds
Do not use wilc_get_chipid() outside of wlan.c . Instead, call
wilc_get_chipid() right after the SDIO/SPI interface has been
initialized to cache the device chipid, and then use the cached
chipid throughout the driver. Make wilc_get_chipid() static and
remove its prototype from wlan.h . Make wilc_get_chipid() return
a proper return value instead of a chipid.
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Adham Abozaeid <redacted>
Cc: Ajay Singh <ajay.kathat@microchip.com>
Cc: Alexis Lothoré <redacted>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Eric Dumazet <redacted>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
---
V2: New patch
V3: - Undo setup in wilc_wlan_init() if chip is neither wilc1000 or wilc3000
- Make wilc_get_chipid() return proper return value
---
.../net/wireless/microchip/wilc1000/sdio.c | 13 ----
.../net/wireless/microchip/wilc1000/wlan.c | 74 +++++++++++--------
.../net/wireless/microchip/wilc1000/wlan.h | 1 -
3 files changed, 43 insertions(+), 45 deletions(-)
diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c
index 41122199d51eb..90357c89ae29b 100644
--- a/drivers/net/wireless/microchip/wilc1000/sdio.c
+++ b/drivers/net/wireless/microchip/wilc1000/sdio.c@@ -671,7 +671,6 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume) struct wilc_sdio *sdio_priv = wilc->bus_data; struct sdio_cmd52 cmd; int loop, ret; - u32 chipid; /** * function 0 csa enable
@@ -760,18 +759,6 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume) return ret; } - /** - * make sure can read back chip id correctly - **/ - if (!resume) { - ret = wilc_sdio_read_reg(wilc, WILC_CHIPID, &chipid); - if (ret) { - dev_err(&func->dev, "Fail cmd read chip id...\n"); - return ret; - } - dev_err(&func->dev, "chipid (%08x)\n", chipid); - } - sdio_priv->isinit = true; return 0; }
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 533939e71534a..5b7dd37267de0 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c@@ -1402,9 +1402,37 @@ int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids, return ret; } +static int wilc_get_chipid(struct wilc *wilc) +{ + u32 chipid = 0; + u32 rfrevid = 0; + + if (wilc->chipid == 0) { + wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid); + wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID, + &rfrevid); + if (!is_wilc1000(chipid)) { + wilc->chipid = 0; + return -EINVAL; + } + if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */ + if (rfrevid != 0x1) + chipid = WILC_1000_BASE_ID_2A_REV1; + } else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */ + if (rfrevid == 0x4) + chipid = WILC_1000_BASE_ID_2B_REV1; + else if (rfrevid != 0x3) + chipid = WILC_1000_BASE_ID_2B_REV2; + } + + wilc->chipid = chipid; + } + + return 0; +} + static int init_chip(struct net_device *dev) { - u32 chipid; u32 reg; int ret = 0; struct wilc_vif *vif = netdev_priv(dev);
@@ -1412,9 +1440,11 @@ static int init_chip(struct net_device *dev) acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP); - chipid = wilc_get_chipid(wilc, true); + ret = wilc_get_chipid(wilc); + if (ret) + goto release; - if ((chipid & 0xfff) != 0xa0) { + if ((wilc->chipid & 0xfff) != 0xa0) { ret = wilc->hif_func->hif_read_reg(wilc, WILC_CORTUS_RESET_MUX_SEL, ®);
@@ -1445,34 +1475,6 @@ static int init_chip(struct net_device *dev) return ret; } -u32 wilc_get_chipid(struct wilc *wilc, bool update) -{ - u32 chipid = 0; - u32 rfrevid = 0; - - if (wilc->chipid == 0 || update) { - wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid); - wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID, - &rfrevid); - if (!is_wilc1000(chipid)) { - wilc->chipid = 0; - return wilc->chipid; - } - if (chipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */ - if (rfrevid != 0x1) - chipid = WILC_1000_BASE_ID_2A_REV1; - } else if (chipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */ - if (rfrevid == 0x4) - chipid = WILC_1000_BASE_ID_2B_REV1; - else if (rfrevid != 0x3) - chipid = WILC_1000_BASE_ID_2B_REV2; - } - - wilc->chipid = chipid; - } - return wilc->chipid; -} - int wilc_load_mac_from_nv(struct wilc *wl) { int ret = -EINVAL;
@@ -1535,9 +1537,19 @@ int wilc_wlan_init(struct net_device *dev) if (!wilc->hif_func->hif_is_init(wilc)) { acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY); ret = wilc->hif_func->hif_init(wilc, false); + if (!ret) + ret = wilc_get_chipid(wilc); release_bus(wilc, WILC_BUS_RELEASE_ONLY); if (ret) goto fail; + + if (!is_wilc1000(wilc->chipid)) { + netdev_err(dev, "Unsupported chipid: %x\n", wilc->chipid); + ret = -EINVAL; + goto fail; + } + + netdev_dbg(dev, "chipid (%08x)\n", wilc->chipid); } if (!wilc->vmm_table)
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index dd2fb3c2f06a2..ae187192a79c6 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h@@ -443,6 +443,5 @@ void chip_wakeup(struct wilc *wilc); int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids, u32 count); int wilc_wlan_init(struct net_device *dev); -u32 wilc_get_chipid(struct wilc *wilc, bool update); int wilc_load_mac_from_nv(struct wilc *wilc); #endif
--
2.45.2