[PATCH net-next v15 07/14] net: stmmac: dwmac-loongson: Detach GMAC-specific platform data init
From: Yanteng Si <hidden>
Date: 2024-07-29 12:23:10
Subsystem:
networking drivers, stmmac ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Loongson delivers two types of the network devices: Loongson GMAC and Loongson GNET in the framework of four CPU/Chipsets revisions: Chip Network PCI Dev ID Synopys Version DMA-channel LS2K1000 CPU GMAC 0x7a03 v3.50a/v3.73a 1 LS7A1000 Chipset GMAC 0x7a03 v3.50a/v3.73a 1 LS2K2000 CPU GMAC 0x7a03 v3.73a 8 LS2K2000 CPU GNET 0x7a13 v3.73a 8 LS7A2000 Chipset GNET 0x7a13 v3.73a 1 The driver currently supports the chips with the Loongson GMAC network device synthesized with a single DMA-channel available. As a preparation before adding the Loongson GNET support detach the Loongson GMAC-specific platform data initializations to the loongson_gmac_data() method and preserve the common settings in the loongson_default_data(). While at it drop the return value statement from the loongson_default_data() method as redundant. Note there is no intermediate vendor-specific PCS in between the MAC and PHY on Loongson GMAC and GNET. So the plat->mac_interface field can be freely initialized with the PHY_INTERFACE_MODE_NA value. Signed-off-by: Feiyang Chen <redacted> Signed-off-by: Yinggang Gu <redacted> Reviewed-by: Serge Semin <redacted> Acked-by: Huacai Chen <redacted> Signed-off-by: Yanteng Si <redacted> --- .../ethernet/stmicro/stmmac/dwmac-loongson.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index f39c13a74bb5..9b2e4bdf7cc7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c@@ -11,7 +11,7 @@ #define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03 -static int loongson_default_data(struct plat_stmmacenet_data *plat) +static void loongson_default_data(struct plat_stmmacenet_data *plat) { plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */ plat->has_gmac = 1;
@@ -20,16 +20,14 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat) /* Set default value for multicast hash bins */ plat->multicast_filter_bins = 256; + plat->mac_interface = PHY_INTERFACE_MODE_NA; + /* Set default value for unicast filter entries */ plat->unicast_filter_entries = 1; /* Set the maxmtu to a default of JUMBO_LEN */ plat->maxmtu = JUMBO_LEN; - /* Set default number of RX and TX queues to use */ - plat->tx_queues_to_use = 1; - plat->rx_queues_to_use = 1; - /* Disable Priority config by default */ plat->tx_queues_cfg[0].use_prio = false; plat->rx_queues_cfg[0].use_prio = false;
@@ -42,6 +40,14 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat) plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true; +} + +static int loongson_gmac_data(struct plat_stmmacenet_data *plat) +{ + loongson_default_data(plat); + + plat->tx_queues_to_use = 1; + plat->rx_queues_to_use = 1; return 0; }
@@ -111,11 +117,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id } plat->phy_interface = phy_mode; - plat->mac_interface = PHY_INTERFACE_MODE_GMII; pci_set_master(pdev); - loongson_default_data(plat); + loongson_gmac_data(plat); memset(&res, 0, sizeof(res)); res.addr = pcim_iomap_table(pdev)[0];
--
2.31.4