Thread (26 messages) 26 messages, 4 authors, 2024-03-05

Re: [PATCH net-next v6 07/11] dt-bindings: net: hisi-femac: replace deprecated phy-mode with recommended phy-connection-type

From: Andrew Lunn <andrew@lunn.ch>
Date: 2024-02-29 17:18:27
Also in: linux-devicetree, lkml

On Wed, Feb 28, 2024 at 05:02:31PM +0800, Yang Xiwen via B4 Relay wrote:
From: Yang Xiwen <redacted>

The old property "phy-mode" should be replaced with the latest
"phy-connection-type".
In practice, phy-mode is typically used, and phy-connection-type is
not used much. All new user tend to be phy-mode.

~/linux$ grep -r phy-mode arch/* | wc
   1561    6258  113122
~/linux$ grep -r phy-connection-type arch/* | wc
    372    1489   28981

Most of the phy-connection-type appear in PowerPC.

~/linux$ grep -r phy-connection-type arch/powerpc/* | wc
    247     990   18335

It was the early adopter of DT, long before ARM. The DT standard of
the time, which PowerPC followed, said to use
phy-connection-type. When ARM started using DT, it did not follow the
standard too well, and phy-mode got used a lot. Officially, phy-mode
is deprecated because it is not part of the standard. But practice
does not always follow the standard.

So both are O.K, all the generic code accepts both, and there is no
real reason to change.

	Andrew
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help