Changes in v2:
	- used defines MDIO_CTRL1_LPOWER and MDIO_PMA_CTRL1_SPEED1000
	  in mv88q222x_config_aneg_preinit
	- use genphy_c45_loopback
	- mv88q2xxx_read_status reads speed, master or slave state when
	  autonegotiation is enabled
	- added defines for magic values in mv88q222x_get_sqi

Changes in v3:
	- mv88q2xxx_read_status includes autonegotiation case
	- add support for 100BT1 and 1000BT1 linkmode advertisement
	- use mv88q2xxx_get_sqi and mv88q2xxx_get_sqi_max, remove
	  mv88q222x_get_sqi and mv88q222x_get_sqi_max
	- fix typo: rename mv88q2xxxx_get_sqi and mv88q2xxxx_get_sqi_max to
	  mv88q2xxx_get_sqi and mv88q2xxx_get_sqi
	- add define MDIO_MMD_PCS_MV_RX_STAT for magic value 0x8230, documented
	  in latest datasheets for both PHYs

Changes in V4:
	- clean up init sequence
	- separate patch for fixing typos in upstreamed code

Dimitri Fedrau (5):
  net: phy: Add BaseT1 auto-negotiation constants
  net: phy: Support 100/1000BT1 linkmode advertisements
  net: phy: c45: detect 100/1000BASE-T1 linkmode advertisements
  net: phy: marvell-88q2xxx: fix typos
  net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY

 drivers/net/phy/marvell-88q2xxx.c | 234 +++++++++++++++++++++++++++---
 drivers/net/phy/phy-c45.c         |   3 +-
 include/linux/marvell_phy.h       |   1 +
 include/linux/mdio.h              |   8 +
 include/uapi/linux/mdio.h         |   2 +
 5 files changed, 230 insertions(+), 18 deletions(-)

-- 
2.39.2