[net-next PATCH v7 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
From: Christian Marangi <ansuelsmth@gmail.com>
Date: 2024-01-03 23:04:57
Also in:
linux-arm-kernel, linux-devicetree, linux-leds, lkml
Subsystem:
led subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Document LED inactive high impedance mode to set the LED to require high impedance configuration to be turned OFF. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- Changes v5: - Add this patch Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index f5b40df6b421..9e7b4aabe0bb 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml@@ -206,6 +206,12 @@ properties: Makes LED active low. To turn the LED ON, line needs to be set to low voltage instead of high. + inactive-high-impedance: + type: boolean + description: + Set LED to high-impedance mode to turn the LED OFF. LED might also + describe this mode as tristate. + # Required properties for flash LED child nodes: flash-max-microamp: description:
--
2.43.0