[net-next PATCH v10 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
From: Christian Marangi <ansuelsmth@gmail.com>
Date: 2024-01-25 20:37:23
Also in:
linux-devicetree, linux-leds, lkml, netdev
Subsystem:
led subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Document LED inactive high impedance mode to set the LED to require high impedance configuration to be turned OFF. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Lee Jones <lee@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> --- Changes v10: - Add Review and Ack tags Changes v5: - Add this patch Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 5633e0aa6bdf..8a3c2398b10c 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml@@ -206,6 +206,12 @@ properties: Makes LED active low. To turn the LED ON, line needs to be set to low voltage instead of high. + inactive-high-impedance: + type: boolean + description: + Set LED to high-impedance mode to turn the LED OFF. LED might also + describe this mode as tristate. + # Required properties for flash LED child nodes: flash-max-microamp: description:
--
2.43.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel