[PATCH net-next v4 08/13] netlink: specs: add ethnl PHY_GET command set
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
Date: 2023-12-15 17:12:53
Also in:
linux-arm-kernel, lkml
Subsystem:
networking [ethtool], networking [general], the rest, yaml netlink (ynl) · Maintainers:
Andrew Lunn, Jakub Kicinski, "David S. Miller", Eric Dumazet, Paolo Abeni, Linus Torvalds, Donald Hunter
The PHY_GET command, supporting both DUMP and GET operations, is used to retrieve the list of PHYs connected to a netdevice, and get topology information to know where exactly it sits on the physical link. Add the netlink specs corresponding to that command. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- V4: Remove the ethtool-user generated code V3: New patch Documentation/netlink/specs/ethtool.yaml | 65 ++++++++++++++++++++++++ 1 file changed, 65 insertions(+)
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index bb6e1dc6d1c5..7f6fb1f61dd4 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml@@ -16,6 +16,11 @@ definitions: name: stringset type: enum entries: [] + - + name: phy-upstream-type + enum-name: + type: enum + entries: [ mac, phy ] attribute-sets: -
@@ -945,6 +950,45 @@ attribute-sets: - name: burst-tmr type: u32 + - + name: phy-upstream + attributes: + - + name: index + type: u32 + - + name: sfp-name + type: string + - + name: phy + attributes: + - + name: header + type: nest + nested-attributes: header + - + name: index + type: u32 + - + name: drvname + type: string + - + name: name + type: string + - + name: upstream-type + type: u8 + enum: phy-upstream-type + - + name: upstream + type: nest + nested-attributes: phy-upstream + - + name: downstream-sfp-name + type: string + - + name: id + type: u32 operations: enum-model: directional
@@ -1696,3 +1740,24 @@ operations: name: mm-ntf doc: Notification for change in MAC Merge configuration. notify: mm-get + - + name: phy-get + doc: Get PHY devices attached to an interface + + attribute-set: phy + + do: &phy-get-op + request: + attributes: + - header + reply: + attributes: + - header + - index + - drvname + - name + - upstream-type + - upstream + - downstream-sfp-name + - id + dump: *phy-get-op
--
2.43.0