Re: [RFC PATCH net-next v2 03/10] net: phy: add helpers to handle sfp phy connect/disconnect

On Tue, Nov 21, 2023 at 01:57:24AM +0100, Andrew Lunn wrote:

quoted

+/**
+ * phy_sfp_connect_phy - Connect the SFP module's PHY to the upstream PHY
+ * @upstream: pointer to the upstream phy device
+ * @phy: pointer to the SFP module's phy device
+ *
+ * This helper allows keeping track of PHY devices on the link. It adds the
+ * SFP module's phy to the phy namespace of the upstream phy
+ */
+int phy_sfp_connect_phy(void *upstream, struct phy_device *phy)
+{
+	struct phy_device *phydev = upstream;

Will this function only ever be called from a PHY driver? If so, we
know upstream is PHY. So we can avoid using void * and make it a
struct phy_device *. 

No. This function is hooked into the .connect_phy method of
sfp_upstream_ops, and the SFP bus layer has no idea what the
"upstream" is. In this case, it's a PHY. In the case of phylink,
it's the phylink struct. So no, "struct phy_device *" here will
cause build errors.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!