On Tue, Oct 17, 2023 at 10:42:51AM +0300, Ido Schimmel wrote:
Currently, the time it took a PCI device to become ready after reset is
only printed if it was longer than 1000ms ('PCI_RESET_WAIT'). However,
for debugging purposes it is useful to know this time even if it was
shorter. For example, with the device I am working on, hardware
engineers asked to verify that it becomes ready on the first try (no
delay).
To that end, add a debug level print that can be enabled using dynamic
debug. Example:
# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
# dmesg -c | grep ready
# echo "file drivers/pci/pci.c +p" > /sys/kernel/debug/dynamic_debug/control
# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
# dmesg -c | grep ready
[ 396.060335] mlxsw_spectrum4 0000:01:00.0: ready 0ms after link toggle
# echo "file drivers/pci/pci.c -p" > /sys/kernel/debug/dynamic_debug/control
# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
# dmesg -c | grep ready
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
quoted hunk ↗ jump to hunk
---
drivers/pci/pci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 59c01d68c6d5..0a708e65c5c4 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1216,6 +1216,9 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
if (delay > PCI_RESET_WAIT)
pci_info(dev, "ready %dms after %s\n", delay - 1,
reset_type);
+ else
+ pci_dbg(dev, "ready %dms after %s\n", delay - 1,
+ reset_type);
return 0;
}
--
2.40.1