On Sat, Aug 12, 2023 at 11:11:34PM +0800, Keguang Zhang wrote:

This glue driver is created based on the arch-code
implemented earlier with the platform-specific settings.

Use syscon for SYSCON register access.

Partialy based on the previous work by Serge Semin.

Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>

...

Hi Keguang Zhang,

some minor feedback from my side.

...

+const struct reg_field ls1b_dwmac_syscon_regfields[] = {
+	[GMAC1_USE_UART1]	= REG_FIELD(LS1X_SYSCON0, 4, 4),
+	[GMAC1_USE_UART0]	= REG_FIELD(LS1X_SYSCON0, 3, 3),
+	[GMAC1_SHUT]		= REG_FIELD(LS1X_SYSCON1, 13, 13),
+	[GMAC0_SHUT]		= REG_FIELD(LS1X_SYSCON1, 12, 12),
+	[GMAC1_USE_TXCLK]	= REG_FIELD(LS1X_SYSCON1, 3, 3),
+	[GMAC0_USE_TXCLK]	= REG_FIELD(LS1X_SYSCON1, 2, 2),
+	[GMAC1_USE_PWM23]	= REG_FIELD(LS1X_SYSCON1, 1, 1),
+	[GMAC0_USE_PWM01]	= REG_FIELD(LS1X_SYSCON1, 0, 0)
+};

nit: Perhaps ls1b_dwmac_syscon_regfields should be static.

+
+const struct reg_field ls1c_dwmac_syscon_regfields[] = {
+	[GMAC_SHUT]		= REG_FIELD(LS1X_SYSCON0, 6, 6),
+	[PHY_INTF_SELI]		= REG_FIELD(LS1X_SYSCON1, 28, 30)
+};

Likewise, perhaps ls1c_dwmac_syscon_regfields should be static.

...

+static const struct of_device_id ls1x_dwmac_syscon_match[] = {
+	{ .compatible = "loongson,ls1b-syscon", .data = &ls1b_dwmac_syscon },
+	{ .compatible = "loongson,ls1c-syscon", .data = &ls1c_dwmac_syscon },
+	{ }
+};o

I am seeing a warning about ls1x_dwmac_syscon_match being unused.
I think this is due to CONFIG_OF being unset.

+
+static int ls1x_dwmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct device_node *syscon_np;
+	const struct of_device_id *match;
+	struct regmap *regmap;
+	struct ls1x_dwmac *dwmac;
+	const struct ls1x_dwmac_syscon *syscon;
+	size_t size;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	/* Probe syscon */
+	syscon_np = of_parse_phandle(pdev->dev.of_node, "syscon", 0);
+	if (!syscon_np)
+		return -ENODEV;
+
+	match = of_match_node(ls1x_dwmac_syscon_match, syscon_np);
+	if (!match) {
+		of_node_put(syscon_np);
+		return -EINVAL;
+	}
+	syscon = (const struct ls1x_dwmac_syscon *)match->data;
+
+	regmap = syscon_node_to_regmap(syscon_np);
+	of_node_put(syscon_np);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(&pdev->dev, "Unable to map syscon: %d\n", ret);
+		return ret;
+	}
+
+	size = syscon->nr_reg_fields * sizeof(struct regmap_field *);
+	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac) + size, GFP_KERNEL);
+	if (!dwmac)
+		return -ENOMEM;
+
+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat)) {
+		dev_err(&pdev->dev, "dt configuration failed\n");
+		return PTR_ERR(plat_dat);
+	}
+
+	plat_dat->bsp_priv = dwmac;
+	plat_dat->init = ls1x_dwmac_init;
+	dwmac->dev = &pdev->dev;
+	dwmac->plat_dat = plat_dat;
+	dwmac->syscon = syscon;
+	dwmac->regmap = regmap;
+
+	ret = stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
+	if (ret)
+		goto err_remove_config_dt;
+
+	return 0;
+
+err_remove_config_dt:
+	if (pdev->dev.of_node)
+		stmmac_remove_config_dt(pdev, plat_dat);
+
+	return ret;
+}

...