Thread (33 messages) 33 messages, 6 authors, 2023-07-26

Re: [RFC 00/12] net: huge page backed page_pool

From: Jesper Dangaard Brouer <hidden>
Date: 2023-07-12 14:01:16


On 12/07/2023 02.08, Jakub Kicinski wrote:
On Tue, 11 Jul 2023 17:49:19 +0200 Jesper Dangaard Brouer wrote:
quoted
I see you have discovered that the next bottleneck are the IOTLB misses.
One of the techniques for reducing IOTLB misses is using huge pages.
Called "super-pages" in article (below), and they report that this trick
doesn't work on AMD (Pacifica arch).

I think you have convinced me that the pp_provider idea makes sense for
*this* use-case, because it feels like natural to extend PP with
mitigations for IOTLB misses. (But I'm not 100% sure it fits Mina's
use-case).
We're on the same page then (no pun intended).
quoted
What is your page refcnt strategy for these huge-pages. I assume this
rely on PP frags-scheme, e.g. using page->pp_frag_count.
Is this correctly understood?
Oh, I split the page into individual 4k pages after DMA mapping.
There's no need for the host memory to be a huge page. I mean,
the actual kernel identity mapping is a huge page AFAIU, and the
struct pages are allocated, anyway. We just need it to be a huge
page at DMA mapping time.

So the pages from the huge page provider only differ from normal
alloc_page() pages by the fact that they are a part of a 1G DMA
mapping.

I'm talking mostly about the 1G provider, 2M providers can be
implemented using various strategies cause 2M is smaller than
MAX_ORDER.
quoted
Generally the pp_provider's will have to use the refcnt schemes
supported by page_pool.  (Which is why I'm not 100% sure this fits
Mina's use-case).

[IOTLB details]:

As mentioned on [RFC 08/12] there are other techniques for reducing
IOTLB misses, described in:
   IOMMU: Strategies for Mitigating the IOTLB Bottleneck
    - https://inria.hal.science/inria-00493752/document

I took a deeper look at also discovered Intel's documentation:
   - Intel virtualization technology for directed I/O, arch spec
   -
https://www.intel.com/content/www/us/en/content-details/774206/intel-virtualization-technology-for-directed-i-o-architecture-specification.html

One problem that is interesting to notice is how NICs access the packets
via ring-queue, which is likely larger that number of IOTLB entries.
Thus, a high change of IOTLB misses.  They suggest marking pages with
Eviction Hints (EH) that cause pages to be marked as Transient Mappings
(TM) which allows IOMMU to evict these faster (making room for others).
And then combine this with prefetching.
Interesting, didn't know about EH.
I was looking for a way to set this Eviction Hint (EH) the article
talked about, but I'm at a loss.

quoted
In this context of how fast a page is reused by NIC and spatial
locality, it is worth remembering that PP have two schemes, (1) the fast
alloc cache that in certain cases can recycle pages (and it based on a
stack approach), (2) normal recycling via the ptr_ring that will have a
longer time before page gets reused.
I read somewhere that Intel IOTLB can be as small as 256 entries.
Are IOTLB hardware different from the TLB hardware block?

I can find data on TLB sizes, which says there are two levels on Intel,
quote from "248966-Software-Optimization-Manual-R047.pdf":

  Nehalem microarchitecture implements two levels of translation 
lookaside buffer (TLB). The first level consists of separate TLBs for 
data and code. DTLB0 handles address translation for data accesses, it 
provides 64 entries to support 4KB pages and 32 entries for large pages.
The ITLB provides 64 entries (per thread) for 4KB pages and 7 entries 
(per thread) for large pages.

  The second level TLB (STLB) handles both code and data accesses for 
4KB pages. It support 4KB page translation operation that missed DTLB0 
or ITLB. All entries are 4-way associative. Here is a list of entries
in each DTLB:

  • STLB for 4-KByte pages: 512 entries (services both data and 
instruction look-ups).
  • DTLB0 for large pages: 32 entries.
  • DTLB0 for 4-KByte pages: 64 entries.

  An DTLB0 miss and STLB hit causes a penalty of 7cycles. Software only 
pays this penalty if the DTLB0 is used in some dispatch cases. The 
delays associated with a miss to the STLB and PMH are largely nonblocking.

So it seems pretty much impossible for it to cache accesses to 4k
pages thru recycling. I thought that even 2M pages will start to
be problematic for multi queue devices (1k entries on each ring x
32 rings == 128MB just sitting on the ring, let alone circulation).
Yes, I'm also worried about how badly these NIC rings and PP ptr_ring
affects the IOTLB's ability to cache entries.  Why I suggested testing
out the Eviction Hint (EH), but I have not found a way to use/enable
these as a quick test in your environment.

--Jesper
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help