[PATCH 2/3] net: phy: at803x: remove 1000BaseX mode of qca8081
From: Luo Jie <quic_luoj@quicinc.com>
Date: 2023-06-29 03:49:35
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
QCA808x does not support the link mode 1000BaseX. Signed-off-by: Luo Jie <quic_luoj@quicinc.com> --- drivers/net/phy/at803x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 3339ca372b24..29aab7eaaa90 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c@@ -920,7 +920,7 @@ static int at803x_get_features(struct phy_device *phydev) } } - if (phydev->drv->phy_id != ATH8031_PHY_ID) + if (phydev->drv->phy_id != ATH8031_PHY_ID && phydev->drv->phy_id != QCA8081_PHY_ID) return 0; /* AR8031/AR8033 have different status registers
@@ -933,6 +933,8 @@ static int at803x_get_features(struct phy_device *phydev) * * Remove this mode from the supported link modes * when not operating in 1000BaseX mode. + * + * QCA808x does not support 1000BaseX mode. */ if (!priv->is_1000basex) linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
--
2.17.1