[PATCH v2 41/45] ARM: at91: Kconfig: add config flag for SAM9X7 SoC
From: Varshini Rajendran <hidden>
Date: 2023-06-23 21:07:43
Also in:
alsa-devel, dmaengine, linux-clk, linux-crypto, linux-devicetree, linux-gpio, linux-i2c, linux-mmc, linux-pm, linux-rtc, linux-serial, linux-spi, linux-usb, linux-watchdog, lkml
Subsystem:
arm port, arm/microchip (at91) soc support, the rest · Maintainers:
Russell King, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea, Linus Torvalds
Add config flag for sam9x7 SoC. Signed-off-by: Varshini Rajendran <redacted> --- arch/arm/mach-at91/Kconfig | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 3dd9e718661b..4e9cb30f5091 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig@@ -143,11 +143,28 @@ config SOC_SAM9X60 help Select this if you are using Microchip's SAM9X60 SoC +config SOC_SAM9X7 + bool "SAM9X7" + depends on ARCH_MULTI_V5 + select ATMEL_AIC5_IRQ + select ATMEL_PM if PM + select ATMEL_SDRAMC + select CPU_ARM926T + select HAVE_AT91_USB_CLK + select HAVE_AT91_GENERATED_CLK + select HAVE_AT91_SAM9X60_PLL + select MEMORY + select PINCTRL_AT91 + select SOC_SAM_V4_V5 + select SRAM if PM + help + Select this if you are using Microchip's SAM9X7 SoC + comment "Clocksource driver selection" config ATMEL_CLOCKSOURCE_PIT bool "Periodic Interval Timer (PIT) support" - depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5 + depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5 default SOC_AT91SAM9 || SOC_SAMA5 select ATMEL_PIT help
@@ -157,7 +174,7 @@ config ATMEL_CLOCKSOURCE_PIT config ATMEL_CLOCKSOURCE_TCB bool "Timer Counter Blocks (TCB) support" - default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5 + default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5 select ATMEL_TCB_CLKSRC help Select this to get a high precision clocksource based on a
@@ -168,7 +185,7 @@ config ATMEL_CLOCKSOURCE_TCB config MICROCHIP_CLOCKSOURCE_PIT64B bool "64-bit Periodic Interval Timer (PIT64B) support" - default SOC_SAM9X60 || SOC_SAMA7 + default SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA7 select MICROCHIP_PIT64B help Select this to get a high resolution clockevent (SAM9X60) or
--
2.25.1