Thread (83 messages) 83 messages, 4 authors, 2023-06-26
STALE1116d
Revisions (2)
  1. v2 current
  2. v4 [diff vs current]

[PATCH v2 33/45] dt-bindings: usb: atmel: Update DT bindings documentation for sam9x7

From: Varshini Rajendran <hidden>
Date: 2023-06-23 20:50:35
Also in: alsa-devel, dmaengine, linux-clk, linux-crypto, linux-devicetree, linux-gpio, linux-i2c, linux-mmc, linux-pm, linux-rtc, linux-serial, linux-spi, linux-usb, linux-watchdog, lkml
Subsystem: open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman

Add sam9x7 bindings.

Signed-off-by: Varshini Rajendran <redacted>
---
 Documentation/devicetree/bindings/usb/atmel-usb.txt | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 12183ef47ee4..6359af0123bf 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -3,8 +3,8 @@ Atmel SOC USB controllers
 OHCI
 
 Required properties:
- - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
-   used in host mode.
+ - compatible: Should be "atmel,at91rm9200-ohci" or "microchip,sam9x7-ohci"
+   for USB controllers used in host mode.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ohci interrupt
  - clocks: Should reference the peripheral, host and system clocks
@@ -30,8 +30,8 @@ usb0: ohci@500000 {
 EHCI
 
 Required properties:
- - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
-   used in host mode.
+ - compatible: Should be "atmel,at91sam9g45-ehci" or "microchip,sam9x7-ehci"
+   for USB controllers used in host mode.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ehci interrupt
  - clocks: Should reference the peripheral and the UTMI clocks
@@ -87,6 +87,7 @@ Required properties:
 	       "atmel,at91sam9g45-udc"
 	       "atmel,sama5d3-udc"
 	       "microchip,sam9x60-udc"
+	       "microchip,sam9x7-udc"
 	       "microchip,lan9662-udc"
 	       For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
 	       is required.
-- 
2.25.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help