[PATCH RFC 10/20] dt-bindings: mtd: oxnas-nand: remove obsolete bindings
From: Neil Armstrong <neil.armstrong@linaro.org>
Date: 2023-03-31 08:36:21
Also in:
linux-arm-kernel, linux-clk, linux-devicetree, linux-gpio, linux-pm, lkml
Subsystem:
memory technology devices (mtd), open firmware and flattened device tree bindings, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Due to lack of maintainance and stall of development for a few years now, and since no new features will ever be added upstream, remove the for OX810 and OX820 nand bindings. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- .../devicetree/bindings/mtd/oxnas-nand.txt | 41 ---------------------- 1 file changed, 41 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/oxnas-nand.txt b/Documentation/devicetree/bindings/mtd/oxnas-nand.txt
deleted file mode 100644
index 2ba07fc8b79c..000000000000
--- a/Documentation/devicetree/bindings/mtd/oxnas-nand.txt
+++ /dev/null@@ -1,41 +0,0 @@ -* Oxford Semiconductor OXNAS NAND Controller - -Please refer to nand-controller.yaml for generic information regarding MTD NAND bindings. - -Required properties: - - compatible: "oxsemi,ox820-nand" - - reg: Base address and length for NAND mapped memory. - -Optional Properties: - - clocks: phandle to the NAND gate clock if needed. - - resets: phandle to the NAND reset control if needed. - -Example: - -nandc: nand-controller@41000000 { - compatible = "oxsemi,ox820-nand"; - reg = <0x41000000 0x100000>; - clocks = <&stdclk CLK_820_NAND>; - resets = <&reset RESET_NAND>; - #address-cells = <1>; - #size-cells = <0>; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - read-only; - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; -};
--
2.34.1