[PATCH RFC 06/20] dt-bindings: clk: oxnas: remove obsolete bindings
From: Neil Armstrong <neil.armstrong@linaro.org>
Date: 2023-03-31 08:35:18
Also in:
linux-arm-kernel, linux-clk, linux-devicetree, linux-gpio, linux-pm, lkml
Subsystem:
common clk framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Due to lack of maintainance and stall of development for a few years now, and since no new features will ever be added upstream, remove the OX810 and OX820 clock bindings. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- .../devicetree/bindings/clock/oxnas,stdclk.txt | 28 ---------------------- 1 file changed, 28 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt b/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
deleted file mode 100644
index b652f3fb7796..000000000000
--- a/Documentation/devicetree/bindings/clock/oxnas,stdclk.txt
+++ /dev/null@@ -1,28 +0,0 @@ -Oxford Semiconductor OXNAS SoC Family Standard Clocks -================================================ - -Please also refer to clock-bindings.txt in this directory for common clock -bindings usage. - -Required properties: -- compatible: For OX810SE, should be "oxsemi,ox810se-stdclk" - For OX820, should be "oxsemi,ox820-stdclk" -- #clock-cells: 1, see below - -Parent node should have the following properties : -- compatible: For OX810SE, should be - "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" - For OX820, should be - "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" - -example: - -sys: sys-ctrl@000000 { - compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; - reg = <0x000000 0x100000>; - - stdclk: stdclk { - compatible = "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; -};
--
2.34.1