[PATCH v1 08/20] ARM: dts: imx6dl-plybas: configure ethernet reference clock parent
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2023-01-13 14:34:40
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Configure Ethernet reference clock parent in an obvious way instead of using cryptic ptp way. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/imx6dl-plybas.dts | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts
index c52e6caf3996..e98046eea7a4 100644
--- a/arch/arm/boot/dts/imx6dl-plybas.dts
+++ b/arch/arm/boot/dts/imx6dl-plybas.dts@@ -75,6 +75,7 @@ clk50m_phy: phy-clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_5v0: regulator-5v0 {
@@ -99,6 +100,13 @@ &can2 { status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default";
@@ -116,10 +124,6 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay";
--
2.30.2