[PATCH v1 14/20] ARM: dts: imx6dl-eckelmann-ci4x10: configure ethernet reference clock parent
From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2023-01-13 14:34:26
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Configure Ethernet reference clock parent in an obvious way instead of using cryptic ptp way. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
index 864dc5018451..33825b5a8f26 100644
--- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts@@ -28,6 +28,7 @@ rmii_clk: clock-rmii { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_usb_h1_vbus: regulator-usb-h1-vbus {
@@ -64,6 +65,13 @@ &can2 { status = "okay"; }; +&clks { + clocks = <&rmii_clk>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&rmii_clk>; +}; + &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>;
@@ -297,11 +305,6 @@ &fec { phy-mode = "rmii"; phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&rmii_clk>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; status = "okay"; mdio {
--
2.30.2