On 9.01.2023 21:13, Dmitry Baryshkov wrote:

On 09/01/2023 19:44, Bartosz Golaszewski wrote:

quoted

From: Bartosz Golaszewski <redacted>

This adds basic support for the Qualcomm sa8775p platform and its reference
board: sa8775p-ride. The dtsi contains basic SoC description required for
a simple boot-to-shell. The dts enables boot-to-shell with UART on the
sa8775p-ride board. There are three new drivers required to boot the board:
pinctrl, interconnect and GCC clock. Other patches contain various tweaks
to existing code. More support is coming up.

Bartosz Golaszewski (15):
   dt-bindings: clock: sa8775p: add bindings for Qualcomm gcc-sa8775p
   arm64: defconfig: enable the clock driver for Qualcomm SA8775P
     platforms
   dt-bindings: clock: qcom-rpmhcc: document the clock for sa8775p
   clk: qcom: rpmh: add clocks for sa8775p
   dt-bindings: interconnect: qcom: document the interconnects for
     sa8775p
   arm64: defconfig: enable the interconnect driver for Qualcomm SA8775P
   dt-bindings: pinctrl: sa8775p: add bindings for qcom,sa8775p-tlmm
   arm64: defconfig: enable the pinctrl driver for Qualcomm SA8775P
     platforms
   dt-bindings: mailbox: qcom-ipcc: document the sa8775p platform
   dt-bindings: power: qcom,rpmpd: document sa8775p
   soc: qcom: rmphpd: add power domains for sa8775p
   dt-bindings: arm-smmu: document the smmu on Qualcomm SA8775P
   iommu: arm-smmu: qcom: add support for sa8775p
   dt-bindings: arm: qcom: document the sa8775p reference board
   arm64: dts: qcom: add initial support for qcom sa8775p-ride

Shazad Hussain (2):
   clk: qcom: add the GCC driver for sa8775p

This patch didn't make it to the list. Please check if you can fix or split it somehow?

It's a known issue with lists clipping messages that are too long.
I'll forward it to you.

Konrad