Thread (21 messages) 21 messages, 8 authors, 2022-11-04

Re: [PATCH v2 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver

From: Md Danish Anwar <hidden>
Date: 2022-11-04 10:27:41
Also in: linux-arm-kernel, linux-devicetree, lkml 

Hi Andrew,

I am Danish, new addition to TI team. Puranjay left TI, I'll be posting
upstream patches for Programmable Real-time Unit and Industrial Communication
Subsystem Gigabit (PRU_ICSSG).

On 05/06/22 21:07, Andrew Lunn wrote:
quoted
+static inline u32 addr_to_da0(const u8 *addr)
+{
+	return (u32)(addr[0] | addr[1] << 8 |
+		addr[2] << 16 | addr[3] << 24);
+};
+
+static inline u32 addr_to_da1(const u8 *addr)
+{
+	return (u32)(addr[4] | addr[5] << 8);
+};
No inline functions please.
Sure I will remove the inline function.

There are total 8 instances where the above two inline functions are called.
So if I removed these inline functions there are two approaches to address the
8 instances.

1. Instead of calling these functions, I should use the return logic "(u32)
(addr[4] | addr[5] << 8);" at all the 8 instances.
2. I can define a macro for this logic and call the macro for all the 8 instances.

Please let me know which approach should I go with. Also if you have any other
approach, please let me know.
quoted
+
+static void rx_class_ft1_set_start_len(struct regmap *miig_rt, int slice,
+				       u16 start, u8 len)
+{
+	u32 offset, val;
+
+	offset = offs[slice].ft1_start_len;
+	val = FT1_LEN(len) | FT1_START(start);
+	regmap_write(miig_rt, offset, val);
+}
+
+static void rx_class_ft1_set_da(struct regmap *miig_rt, int slice,
+				int n, const u8 *addr)
+{
+	u32 offset;
+
+	offset = FT1_N_REG(slice, n, FT1_DA0);
+	regmap_write(miig_rt, offset, addr_to_da0(addr));
+	offset = FT1_N_REG(slice, n, FT1_DA1);
+	regmap_write(miig_rt, offset, addr_to_da1(addr));
+}
+
+static void rx_class_ft1_set_da_mask(struct regmap *miig_rt, int slice,
+				     int n, const u8 *addr)
+{
+	u32 offset;
+
+	offset = FT1_N_REG(slice, n, FT1_DA0_MASK);
+	regmap_write(miig_rt, offset, addr_to_da0(addr));
+	offset = FT1_N_REG(slice, n, FT1_DA1_MASK);
+	regmap_write(miig_rt, offset, addr_to_da1(addr));
+}
+
+static void rx_class_ft1_cfg_set_type(struct regmap *miig_rt, int slice, int n,
+				      enum ft1_cfg_type type)
+{
+	u32 offset;
+
+	offset = offs[slice].ft1_cfg;
+	regmap_update_bits(miig_rt, offset, FT1_CFG_MASK(n),
+			   type << FT1_CFG_SHIFT(n));
+}
+
+static void rx_class_sel_set_type(struct regmap *miig_rt, int slice, int n,
+				  enum rx_class_sel_type type)
+{
+	u32 offset;
+
+	offset = offs[slice].rx_class_cfg1;
+	regmap_update_bits(miig_rt, offset, RX_CLASS_SEL_MASK(n),
+			   type << RX_CLASS_SEL_SHIFT(n));
+}
+
+static void rx_class_set_and(struct regmap *miig_rt, int slice, int n,
+			     u32 data)
+{
+	u32 offset;
+
+	offset = RX_CLASS_N_REG(slice, n, RX_CLASS_AND_EN);
+	regmap_write(miig_rt, offset, data);
+}
+
+static void rx_class_set_or(struct regmap *miig_rt, int slice, int n,
+			    u32 data)
+{
+	u32 offset;
+
+	offset = RX_CLASS_N_REG(slice, n, RX_CLASS_OR_EN);
+	regmap_write(miig_rt, offset, data);
+}
+
+void icssg_class_set_host_mac_addr(struct regmap *miig_rt, const u8 *mac)
+{
+	regmap_write(miig_rt, MAC_INTERFACE_0, addr_to_da0(mac));
+	regmap_write(miig_rt, MAC_INTERFACE_1, addr_to_da1(mac));
+}
+
+void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac)
+{
+	regmap_write(miig_rt, offs[slice].mac0, addr_to_da0(mac));
+	regmap_write(miig_rt, offs[slice].mac1, addr_to_da1(mac));
+}
+
+/* disable all RX traffic */
+void icssg_class_disable(struct regmap *miig_rt, int slice)
+{
+	u32 data, offset;
+	int n;
+
+	/* Enable RX_L2_G */
+	regmap_update_bits(miig_rt, ICSSG_CFG_OFFSET, ICSSG_CFG_RX_L2_G_EN,
+			   ICSSG_CFG_RX_L2_G_EN);
+
+	for (n = 0; n < ICSSG_NUM_CLASSIFIERS; n++) {
+		/* AND_EN = 0 */
+		rx_class_set_and(miig_rt, slice, n, 0);
+		/* OR_EN = 0 */
+		rx_class_set_or(miig_rt, slice, n, 0);
+
+		/* set CFG1 to OR */
+		rx_class_sel_set_type(miig_rt, slice, n, RX_CLASS_SEL_TYPE_OR);
+
+		/* configure gate */
+		offset = RX_CLASS_GATES_N_REG(slice, n);
+		regmap_read(miig_rt, offset, &data);
+		/* clear class_raw so we go through filters */
+		data &= ~RX_CLASS_GATES_RAW_MASK;
+		/* set allow and phase mask */
+		data |= RX_CLASS_GATES_ALLOW_MASK | RX_CLASS_GATES_PHASE_MASK;
+		regmap_write(miig_rt, offset, data);
+	}
+
+	/* FT1 Disabled */
+	for (n = 0; n < ICSSG_NUM_FT1_SLOTS; n++) {
+		u8 addr[] = { 0, 0, 0, 0, 0, 0, };
+
+		rx_class_ft1_cfg_set_type(miig_rt, slice, n,
+					  FT1_CFG_TYPE_DISABLED);
+		rx_class_ft1_set_da(miig_rt, slice, n, addr);
+		rx_class_ft1_set_da_mask(miig_rt, slice, n, addr);
+	}
+
+	/* clear CFG2 */
+	regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
+}
+
+void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti)
+{
+	int classifiers_in_use = 1;
+	u32 data;
+	int n;
+
+	/* defaults */
+	icssg_class_disable(miig_rt, slice);
+
+	/* Setup Classifier */
+	for (n = 0; n < classifiers_in_use; n++) {
+		/* match on Broadcast or MAC_PRU address */
+		data = RX_CLASS_FT_BC | RX_CLASS_FT_DA_P;
+
+		/* multicast? */
+		if (allmulti)
+			data |= RX_CLASS_FT_MC;
+
+		rx_class_set_or(miig_rt, slice, n, data);
+
+		/* set CFG1 for OR_OR_AND for classifier */
+		rx_class_sel_set_type(miig_rt, slice, n,
+				      RX_CLASS_SEL_TYPE_OR_OR_AND);
+	}
+
+	/* clear CFG2 */
+	regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
+}
+
+/* required for SAV check */
+void icssg_ft1_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac_addr)
+{
+	u8 mask_addr[] = { 0, 0, 0, 0, 0, 0, };
+
+	rx_class_ft1_set_start_len(miig_rt, slice, 0, 6);
+	rx_class_ft1_set_da(miig_rt, slice, 0, mac_addr);
+	rx_class_ft1_set_da_mask(miig_rt, slice, 0, mask_addr);
+	rx_class_ft1_cfg_set_type(miig_rt, slice, 0, FT1_CFG_TYPE_EQ);
+}
diff --git a/drivers/net/ethernet/ti/icssg_config.c b/drivers/net/ethernet/ti/icssg_config.c
new file mode 100644
index 000000000000..a88ea4933802
--- /dev/null
+++ b/drivers/net/ethernet/ti/icssg_config.c
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0
+/* ICSSG Ethernet driver
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com
+ */
+
+#include <linux/iopoll.h>
+#include <linux/regmap.h>
+#include <uapi/linux/if_ether.h>
+#include "icssg_config.h"
+#include "icssg_prueth.h"
+#include "icssg_switch_map.h"
+#include "icssg_mii_rt.h"
+
+/* TX IPG Values to be set for 100M link speed. These values are
+ * in ocp_clk cycles. So need change if ocp_clk is changed for a specific
+ * h/w design.
+ */
+
+/* IPG is in core_clk cycles */
+#define MII_RT_TX_IPG_100M	0x17
+#define MII_RT_TX_IPG_1G	0xb
+
+#define	ICSSG_QUEUES_MAX		64
+#define	ICSSG_QUEUE_OFFSET		0xd00
+#define	ICSSG_QUEUE_PEEK_OFFSET		0xe00
+#define	ICSSG_QUEUE_CNT_OFFSET		0xe40
+#define	ICSSG_QUEUE_RESET_OFFSET	0xf40
+
+#define	ICSSG_NUM_TX_QUEUES	8
+
+#define	RECYCLE_Q_SLICE0	16
+#define	RECYCLE_Q_SLICE1	17
+
+#define	ICSSG_NUM_OTHER_QUEUES	5	/* port, host and special queues */
+
+#define	PORT_HI_Q_SLICE0	32
+#define	PORT_LO_Q_SLICE0	33
+#define	HOST_HI_Q_SLICE0	34
+#define	HOST_LO_Q_SLICE0	35
+#define	HOST_SPL_Q_SLICE0	40	/* Special Queue */
+
+#define	PORT_HI_Q_SLICE1	36
+#define	PORT_LO_Q_SLICE1	37
+#define	HOST_HI_Q_SLICE1	38
+#define	HOST_LO_Q_SLICE1	39
+#define	HOST_SPL_Q_SLICE1	41	/* Special Queue */
+
+#define MII_RXCFG_DEFAULT	(PRUSS_MII_RT_RXCFG_RX_ENABLE | \
+				 PRUSS_MII_RT_RXCFG_RX_DATA_RDY_MODE_DIS | \
+				 PRUSS_MII_RT_RXCFG_RX_L2_EN | \
+				 PRUSS_MII_RT_RXCFG_RX_L2_EOF_SCLR_DIS)
+
+#define MII_TXCFG_DEFAULT	(PRUSS_MII_RT_TXCFG_TX_ENABLE | \
+				 PRUSS_MII_RT_TXCFG_TX_AUTO_PREAMBLE | \
+				 PRUSS_MII_RT_TXCFG_TX_32_MODE_EN | \
+				 PRUSS_MII_RT_TXCFG_TX_IPG_WIRE_CLK_EN)
+
+#define ICSSG_CFG_DEFAULT	(ICSSG_CFG_TX_L1_EN | \
+				 ICSSG_CFG_TX_L2_EN | ICSSG_CFG_RX_L2_G_EN | \
+				 ICSSG_CFG_TX_PRU_EN | \
+				 ICSSG_CFG_SGMII_MODE)
+
+#define FDB_GEN_CFG1		0x60
+#define SMEM_VLAN_OFFSET	8
+#define SMEM_VLAN_OFFSET_MASK	GENMASK(25, 8)
+
+#define FDB_GEN_CFG2		0x64
+#define FDB_VLAN_EN		BIT(6)
+#define FDB_HOST_EN		BIT(2)
+#define FDB_PRU1_EN		BIT(1)
+#define FDB_PRU0_EN		BIT(0)
+#define FDB_EN_ALL		(FDB_PRU0_EN | FDB_PRU1_EN | \
+				 FDB_HOST_EN | FDB_VLAN_EN)
+
+struct map {
+	int queue;
+	u32 pd_addr_start;
+	u32 flags;
+	bool special;
+};
+
+struct map hwq_map[2][ICSSG_NUM_OTHER_QUEUES] = {
+	{
+		{ PORT_HI_Q_SLICE0, PORT_DESC0_HI, 0x200000, 0 },
+		{ PORT_LO_Q_SLICE0, PORT_DESC0_LO, 0, 0 },
+		{ HOST_HI_Q_SLICE0, HOST_DESC0_HI, 0x200000, 0 },
+		{ HOST_LO_Q_SLICE0, HOST_DESC0_LO, 0, 0 },
+		{ HOST_SPL_Q_SLICE0, HOST_SPPD0, 0x400000, 1 },
+	},
+	{
+		{ PORT_HI_Q_SLICE1, PORT_DESC1_HI, 0xa00000, 0 },
+		{ PORT_LO_Q_SLICE1, PORT_DESC1_LO, 0x800000, 0 },
+		{ HOST_HI_Q_SLICE1, HOST_DESC1_HI, 0xa00000, 0 },
+		{ HOST_LO_Q_SLICE1, HOST_DESC1_LO, 0x800000, 0 },
+		{ HOST_SPL_Q_SLICE1, HOST_SPPD1, 0xc00000, 1 },
+	},
+};
+
+static void icssg_config_mii_init(struct prueth_emac *emac)
+{
+	struct prueth *prueth = emac->prueth;
+	struct regmap *mii_rt = prueth->mii_rt;
+	int slice = prueth_emac_slice(emac);
+	u32 rxcfg_reg, txcfg_reg, pcnt_reg;
+	u32 rxcfg, txcfg;
+
+	rxcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RXCFG0 :
+				       PRUSS_MII_RT_RXCFG1;
+	txcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_TXCFG0 :
+				       PRUSS_MII_RT_TXCFG1;
+	pcnt_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RX_PCNT0 :
+				       PRUSS_MII_RT_RX_PCNT1;
+
+	rxcfg = MII_RXCFG_DEFAULT;
+	txcfg = MII_TXCFG_DEFAULT;
+
+	if (slice == ICSS_MII1)
+		rxcfg |= PRUSS_MII_RT_RXCFG_RX_MUX_SEL;
+
+	/* In MII mode TX lines swapped inside ICSSG, so TX_MUX_SEL cfg need
+	 * to be swapped also comparing to RGMII mode.
+	 */
+	if (emac->phy_if == PHY_INTERFACE_MODE_MII && slice == ICSS_MII0)
+		txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
+	else if (emac->phy_if != PHY_INTERFACE_MODE_MII && slice == ICSS_MII1)
+		txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
+
+	regmap_write(mii_rt, rxcfg_reg, rxcfg);
+	regmap_write(mii_rt, txcfg_reg, txcfg);
+	regmap_write(mii_rt, pcnt_reg, 0x1);
+}
+
+static void icssg_miig_queues_init(struct prueth *prueth, int slice)
+{
+	struct regmap *miig_rt = prueth->miig_rt;
+	void __iomem *smem = prueth->shram.va;
+	u8 pd[ICSSG_SPECIAL_PD_SIZE];
+	int queue = 0, i, j;
+	u32 *pdword;
+
+	/* reset hwqueues */
+	if (slice)
+		queue = ICSSG_NUM_TX_QUEUES;
+
+	for (i = 0; i < ICSSG_NUM_TX_QUEUES; i++) {
+		regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
+		queue++;
+	}
+
+	queue = slice ? RECYCLE_Q_SLICE1 : RECYCLE_Q_SLICE0;
+	regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
+
+	for (i = 0; i < ICSSG_NUM_OTHER_QUEUES; i++) {
+		regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET,
+			     hwq_map[slice][i].queue);
+	}
+
+	/* initialize packet descriptors in SMEM */
+	/* push pakcet descriptors to hwqueues */
+
+	pdword = (u32 *)pd;
+	for (j = 0; j < ICSSG_NUM_OTHER_QUEUES; j++) {
+		struct map *mp;
+		int pd_size, num_pds;
+		u32 pdaddr;
+
+		mp = &hwq_map[slice][j];
+		if (mp->special) {
+			pd_size = ICSSG_SPECIAL_PD_SIZE;
+			num_pds = ICSSG_NUM_SPECIAL_PDS;
+		} else	{
+			pd_size = ICSSG_NORMAL_PD_SIZE;
+			num_pds = ICSSG_NUM_NORMAL_PDS;
+		}
+
+		for (i = 0; i < num_pds; i++) {
+			memset(pd, 0, pd_size);
+
+			pdword[0] &= cpu_to_le32(ICSSG_FLAG_MASK);
+			pdword[0] |= cpu_to_le32(mp->flags);
+			pdaddr = mp->pd_addr_start + i * pd_size;
+
+			memcpy_toio(smem + pdaddr, pd, pd_size);
+			queue = mp->queue;
+			regmap_write(miig_rt, ICSSG_QUEUE_OFFSET + 4 * queue,
+				     pdaddr);
+		}
+	}
+}
+
+void icssg_config_ipg(struct prueth_emac *emac)
+{
+	struct prueth *prueth = emac->prueth;
+	int slice = prueth_emac_slice(emac);
+
+	switch (emac->speed) {
+	case SPEED_1000:
+		icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_1G);
+		break;
+	case SPEED_100:
+		icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
+		break;
+	default:
+		/* Other links speeds not supported */
+		netdev_err(emac->ndev, "Unsupported link speed\n");
+		return;
+	}
+}
+
+static void emac_r30_cmd_init(struct prueth_emac *emac)
+{
+	int i;
+	struct icssg_r30_cmd *p;
+
+	p = emac->dram.va + MGR_R30_CMD_OFFSET;
+
+	for (i = 0; i < 4; i++)
+		writel(EMAC_NONE, &p->cmd[i]);
+}
+
+static int emac_r30_is_done(struct prueth_emac *emac)
+{
+	const struct icssg_r30_cmd *p;
+	int i;
+	u32 cmd;
+
+	p = emac->dram.va + MGR_R30_CMD_OFFSET;
+
+	for (i = 0; i < 4; i++) {
+		cmd = readl(&p->cmd[i]);
+		if (cmd != EMAC_NONE)
+			return 0;
+	}
+
+	return 1;
+}
+
+static int prueth_emac_buffer_setup(struct prueth_emac *emac)
+{
+	struct icssg_buffer_pool_cfg *bpool_cfg;
+	struct prueth *prueth = emac->prueth;
+	int slice = prueth_emac_slice(emac);
+	struct icssg_rxq_ctx *rxq_ctx;
+	u32 addr;
+	int i;
+
+	/* Layout to have 64KB aligned buffer pool
+	 * |BPOOL0|BPOOL1|RX_CTX0|RX_CTX1|
+	 */
+
+	addr = lower_32_bits(prueth->msmcram.pa);
+	if (slice)
+		addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
+
+	if (addr % SZ_64K) {
+		dev_warn(prueth->dev, "buffer pool needs to be 64KB aligned\n");
+		return -EINVAL;
+	}
+
+	bpool_cfg = emac->dram.va + BUFFER_POOL_0_ADDR_OFFSET;
+	/* workaround for f/w bug. bpool 0 needs to be initilalized */
+	bpool_cfg[0].addr = cpu_to_le32(addr);
+	bpool_cfg[0].len = 0;
+
+	for (i = PRUETH_EMAC_BUF_POOL_START;
+	     i < (PRUETH_EMAC_BUF_POOL_START + PRUETH_NUM_BUF_POOLS);
+	     i++) {
+		bpool_cfg[i].addr = cpu_to_le32(addr);
+		bpool_cfg[i].len = cpu_to_le32(PRUETH_EMAC_BUF_POOL_SIZE);
+		addr += PRUETH_EMAC_BUF_POOL_SIZE;
+	}
+
+	if (!slice)
+		addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
+	else
+		addr += PRUETH_EMAC_RX_CTX_BUF_SIZE * 2;
+
+	/* Pre-emptible RX buffer queue */
+	rxq_ctx = emac->dram.va + HOST_RX_Q_PRE_CONTEXT_OFFSET;
+	for (i = 0; i < 3; i++)
+		rxq_ctx->start[i] = cpu_to_le32(addr);
+
+	addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
+	rxq_ctx->end = cpu_to_le32(addr);
+
+	/* Express RX buffer queue */
+	rxq_ctx = emac->dram.va + HOST_RX_Q_EXP_CONTEXT_OFFSET;
+	for (i = 0; i < 3; i++)
+		rxq_ctx->start[i] = cpu_to_le32(addr);
+
+	addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
+	rxq_ctx->end = cpu_to_le32(addr);
+
+	return 0;
+}
+
+static void icssg_init_emac_mode(struct prueth *prueth)
+{
+	/* When the device is configured as a bridge and it is being brought back
+	 * to the emac mode, the host mac address has to be set as 0.
+	 */
+	u8 mac[ETH_ALEN] = { 0 };
+
+	if (prueth->emacs_initialized)
+		return;
+
+	regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK, 0);
+	regmap_write(prueth->miig_rt, FDB_GEN_CFG2, 0);
+	/* Clear host MAC address */
+	icssg_class_set_host_mac_addr(prueth->miig_rt, mac);
+}
+
+int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
+{
+	void *config = emac->dram.va + ICSSG_CONFIG_OFFSET;
+	u8 *cfg_byte_ptr = config;
+	struct icssg_flow_cfg *flow_cfg;
+	u32 mask;
+	int ret;
+
+	icssg_init_emac_mode(prueth);
+
+	memset_io(config, 0, TAS_GATE_MASK_LIST0);
+	icssg_miig_queues_init(prueth, slice);
+
+	emac->speed = SPEED_1000;
+	emac->duplex = DUPLEX_FULL;
+	if (!phy_interface_mode_is_rgmii(emac->phy_if)) {
+		emac->speed = SPEED_100;
+		emac->duplex = DUPLEX_FULL;
+	}
+	regmap_update_bits(prueth->miig_rt, ICSSG_CFG_OFFSET, ICSSG_CFG_DEFAULT, ICSSG_CFG_DEFAULT);
+	icssg_miig_set_interface_mode(prueth->miig_rt, slice, emac->phy_if);
+	icssg_config_mii_init(emac);
+	icssg_config_ipg(emac);
+	icssg_update_rgmii_cfg(prueth->miig_rt, emac);
+
+	/* set GPI mode */
+	pruss_cfg_gpimode(prueth->pruss, prueth->pru_id[slice],
+			  PRUSS_GPI_MODE_MII);
+
+	/* enable XFR shift for PRU and RTU */
+	mask = PRUSS_SPP_XFER_SHIFT_EN | PRUSS_SPP_RTU_XFR_SHIFT_EN;
+	pruss_cfg_update(prueth->pruss, PRUSS_CFG_SPP, mask, mask);
+
+	/* set C28 to 0x100 */
+	pru_rproc_set_ctable(prueth->pru[slice], PRU_C28, 0x100 << 8);
+	pru_rproc_set_ctable(prueth->rtu[slice], PRU_C28, 0x100 << 8);
+	pru_rproc_set_ctable(prueth->txpru[slice], PRU_C28, 0x100 << 8);
+
+	flow_cfg = config + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
+	flow_cfg->rx_base_flow = cpu_to_le32(emac->rx_flow_id_base);
+	flow_cfg->mgm_base_flow = 0;
+	*(cfg_byte_ptr + SPL_PKT_DEFAULT_PRIORITY) = 0;
+	*(cfg_byte_ptr + QUEUE_NUM_UNTAGGED) = 0x0;
+
+	ret = prueth_emac_buffer_setup(emac);
+	if (ret)
+		return ret;
+
+	emac_r30_cmd_init(emac);
+
+	return 0;
+}
+
+static struct icssg_r30_cmd emac_r32_bitmask[] = {
+	{{0xffff0004, 0xffff0100, 0xffff0100, EMAC_NONE}},	/* EMAC_PORT_DISABLE */
+	{{0xfffb0040, 0xfeff0200, 0xfeff0200, EMAC_NONE}},	/* EMAC_PORT_BLOCK */
+	{{0xffbb0000, 0xfcff0000, 0xdcff0000, EMAC_NONE}},	/* EMAC_PORT_FORWARD */
+	{{0xffbb0000, 0xfcff0000, 0xfcff2000, EMAC_NONE}},	/* EMAC_PORT_FORWARD_WO_LEARNING */
+	{{0xffff0001, EMAC_NONE,  EMAC_NONE, EMAC_NONE}},	/* ACCEPT ALL */
+	{{0xfffe0002, EMAC_NONE,  EMAC_NONE, EMAC_NONE}},	/* ACCEPT TAGGED */
+	{{0xfffc0000, EMAC_NONE,  EMAC_NONE, EMAC_NONE}},	/* ACCEPT UNTAGGED and PRIO */
+	{{EMAC_NONE,  0xffff0020, EMAC_NONE, EMAC_NONE}},	/* TAS Trigger List change */
+	{{EMAC_NONE,  0xdfff1000, EMAC_NONE, EMAC_NONE}},	/* TAS set state ENABLE*/
+	{{EMAC_NONE,  0xefff2000, EMAC_NONE, EMAC_NONE}},	/* TAS set state RESET*/
+	{{EMAC_NONE,  0xcfff0000, EMAC_NONE, EMAC_NONE}},	/* TAS set state DISABLE*/
+	{{EMAC_NONE,  EMAC_NONE,  0xffff0400, EMAC_NONE}},	/* UC flooding ENABLE*/
+	{{EMAC_NONE,  EMAC_NONE,  0xfbff0000, EMAC_NONE}},	/* UC flooding DISABLE*/
+	{{EMAC_NONE,  EMAC_NONE,  0xffff0800, EMAC_NONE}},	/* MC flooding ENABLE*/
+	{{EMAC_NONE,  EMAC_NONE,  0xf7ff0000, EMAC_NONE}},	/* MC flooding DISABLE*/
+	{{EMAC_NONE,  0xffff4000, EMAC_NONE, EMAC_NONE}},	/* Preemption on Tx ENABLE*/
+	{{EMAC_NONE,  0xbfff0000, EMAC_NONE, EMAC_NONE}},	/* Preemption on Tx DISABLE*/
+	{{0xffff0010,  EMAC_NONE, 0xffff0010, EMAC_NONE}},	/* VLAN AWARE*/
+	{{0xffef0000,  EMAC_NONE, 0xffef0000, EMAC_NONE}}	/* VLAN UNWARE*/
+};
+
+int emac_set_port_state(struct prueth_emac *emac,
+			enum icssg_port_state_cmd cmd)
+{
+	struct icssg_r30_cmd *p;
+	int ret = -ETIMEDOUT;
+	int done = 0;
+	int i;
+
+	p = emac->dram.va + MGR_R30_CMD_OFFSET;
+
+	if (cmd >= ICSSG_EMAC_PORT_MAX_COMMANDS) {
+		netdev_err(emac->ndev, "invalid port command\n");
+		return -EINVAL;
+	}
+
+	/* only one command at a time allowed to firmware */
+	mutex_lock(&emac->cmd_lock);
+
+	for (i = 0; i < 4; i++)
+		writel(emac_r32_bitmask[cmd].cmd[i], &p->cmd[i]);
+
+	/* wait for done */
+	ret = read_poll_timeout(emac_r30_is_done, done, done == 1,
+				1000, 10000, false, emac);
+
+	if (ret == -ETIMEDOUT)
+		netdev_err(emac->ndev, "timeout waiting for command done\n");
+
+	mutex_unlock(&emac->cmd_lock);
+
+	return ret;
+}
+
+void icssg_config_set_speed(struct prueth_emac *emac)
+{
+	u8 fw_speed;
+
+	switch (emac->speed) {
+	case SPEED_1000:
+		fw_speed = FW_LINK_SPEED_1G;
+		break;
+	case SPEED_100:
+		fw_speed = FW_LINK_SPEED_100M;
+		break;
+	default:
+		/* Other links speeds not supported */
+		netdev_err(emac->ndev, "Unsupported link speed\n");
+		return;
+	}
+
+	writeb(fw_speed, emac->dram.va + PORT_LINK_SPEED_OFFSET);
+}
diff --git a/drivers/net/ethernet/ti/icssg_config.h b/drivers/net/ethernet/ti/icssg_config.h
new file mode 100644
index 000000000000..43eb0922172a
--- /dev/null
+++ b/drivers/net/ethernet/ti/icssg_config.h
@@ -0,0 +1,200 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Texas Instruments ICSSG Ethernet driver
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#ifndef __NET_TI_ICSSG_CONFIG_H
+#define __NET_TI_ICSSG_CONFIG_H
+
+struct icssg_buffer_pool_cfg {
+	__le32	addr;
+	__le32	len;
+} __packed;
+
+struct icssg_flow_cfg {
+	__le16 rx_base_flow;
+	__le16 mgm_base_flow;
+} __packed;
+
+#define PRUETH_PKT_TYPE_CMD	0x10
+#define PRUETH_NAV_PS_DATA_SIZE	16	/* Protocol specific data size */
+#define PRUETH_NAV_SW_DATA_SIZE	16	/* SW related data size */
+#define PRUETH_MAX_TX_DESC	512
+#define PRUETH_MAX_RX_DESC	512
+#define PRUETH_MAX_RX_FLOWS	1	/* excluding default flow */
+#define PRUETH_RX_FLOW_DATA	0
+
+#define PRUETH_EMAC_BUF_POOL_SIZE	SZ_8K
+#define PRUETH_EMAC_POOLS_PER_SLICE	24
+#define PRUETH_EMAC_BUF_POOL_START	8
+#define PRUETH_NUM_BUF_POOLS	8
+#define PRUETH_EMAC_RX_CTX_BUF_SIZE	SZ_16K	/* per slice */
+#define MSMC_RAM_SIZE	\
+	(2 * (PRUETH_EMAC_BUF_POOL_SIZE * PRUETH_NUM_BUF_POOLS + \
+	 PRUETH_EMAC_RX_CTX_BUF_SIZE * 2))
+
+struct icssg_rxq_ctx {
+	__le32 start[3];
+	__le32 end;
+} __packed;
+
+/* Load time Fiwmware Configuration */
+
+#define ICSSG_FW_MGMT_CMD_HEADER	0x81
+#define ICSSG_FW_MGMT_FDB_CMD_TYPE	0x03
+#define ICSSG_FW_MGMT_CMD_TYPE		0x04
+#define ICSSG_FW_MGMT_PKT		0x80000000
+
+struct icssg_r30_cmd {
+	u32 cmd[4];
+} __packed;
+
+enum icssg_port_state_cmd {
+	ICSSG_EMAC_PORT_DISABLE = 0,
+	ICSSG_EMAC_PORT_BLOCK,
+	ICSSG_EMAC_PORT_FORWARD,
+	ICSSG_EMAC_PORT_FORWARD_WO_LEARNING,
+	ICSSG_EMAC_PORT_ACCEPT_ALL,
+	ICSSG_EMAC_PORT_ACCEPT_TAGGED,
+	ICSSG_EMAC_PORT_ACCEPT_UNTAGGED_N_PRIO,
+	ICSSG_EMAC_PORT_TAS_TRIGGER,
+	ICSSG_EMAC_PORT_TAS_ENABLE,
+	ICSSG_EMAC_PORT_TAS_RESET,
+	ICSSG_EMAC_PORT_TAS_DISABLE,
+	ICSSG_EMAC_PORT_UC_FLOODING_ENABLE,
+	ICSSG_EMAC_PORT_UC_FLOODING_DISABLE,
+	ICSSG_EMAC_PORT_MC_FLOODING_ENABLE,
+	ICSSG_EMAC_PORT_MC_FLOODING_DISABLE,
+	ICSSG_EMAC_PORT_PREMPT_TX_ENABLE,
+	ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
+	ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE,
+	ICSSG_EMAC_PORT_VLAN_AWARE_DISABLE,
+	ICSSG_EMAC_PORT_MAX_COMMANDS
+};
+
+#define EMAC_NONE           0xffff0000
+#define EMAC_PRU0_P_DI      0xffff0004
+#define EMAC_PRU1_P_DI      0xffff0040
+#define EMAC_TX_P_DI        0xffff0100
+
+#define EMAC_PRU0_P_EN      0xfffb0000
+#define EMAC_PRU1_P_EN      0xffbf0000
+#define EMAC_TX_P_EN        0xfeff0000
+
+#define EMAC_P_BLOCK        0xffff0040
+#define EMAC_TX_P_BLOCK     0xffff0200
+#define EMAC_P_UNBLOCK      0xffbf0000
+#define EMAC_TX_P_UNBLOCK   0xfdff0000
+#define EMAC_LEAN_EN        0xfff70000
+#define EMAC_LEAN_DI        0xffff0008
+
+#define EMAC_ACCEPT_ALL     0xffff0001
+#define EMAC_ACCEPT_TAG     0xfffe0002
+#define EMAC_ACCEPT_PRIOR   0xfffc0000
+
+/* Config area lies in DRAM */
+#define ICSSG_CONFIG_OFFSET	0x0
+
+/* Config area lies in shared RAM */
+#define ICSSG_CONFIG_OFFSET_SLICE0   0
+#define ICSSG_CONFIG_OFFSET_SLICE1   0x8000
+
+#define ICSSG_NUM_NORMAL_PDS	64
+#define ICSSG_NUM_SPECIAL_PDS	16
+
+#define ICSSG_NORMAL_PD_SIZE	8
+#define ICSSG_SPECIAL_PD_SIZE	20
+
+#define ICSSG_FLAG_MASK		0xff00ffff
+
+struct icssg_setclock_desc {
+	u8 request;
+	u8 restore;
+	u8 acknowledgment;
+	u8 cmp_status;
+	u32 margin;
+	u32 cyclecounter0_set;
+	u32 cyclecounter1_set;
+	u32 iepcount_set;
+	u32 rsvd1;
+	u32 rsvd2;
+	u32 CMP0_current;
+	u32 iepcount_current;
+	u32 difference;
+	u32 cyclecounter0_new;
+	u32 cyclecounter1_new;
+	u32 CMP0_new;
+} __packed;
+
+#define ICSSG_CMD_POP_SLICE0	56
+#define ICSSG_CMD_POP_SLICE1	60
+
+#define ICSSG_CMD_PUSH_SLICE0	57
+#define ICSSG_CMD_PUSH_SLICE1	61
+
+#define ICSSG_RSP_POP_SLICE0	58
+#define ICSSG_RSP_POP_SLICE1	62
+
+#define ICSSG_RSP_PUSH_SLICE0	56
+#define ICSSG_RSP_PUSH_SLICE1	60
+
+#define ICSSG_TS_POP_SLICE0	59
+#define ICSSG_TS_POP_SLICE1	63
+
+#define ICSSG_TS_PUSH_SLICE0	40
+#define ICSSG_TS_PUSH_SLICE1	41
+
+/* FDB FID_C2 flag definitions */
+/* Indicates host port membership.*/
+#define ICSSG_FDB_ENTRY_P0_MEMBERSHIP         BIT(0)
+/* Indicates that MAC ID is connected to physical port 1 */
+#define ICSSG_FDB_ENTRY_P1_MEMBERSHIP         BIT(1)
+/* Indicates that MAC ID is connected to physical port 2 */
+#define ICSSG_FDB_ENTRY_P2_MEMBERSHIP         BIT(2)
+/* Ageable bit is set for learned entries and cleared for static entries */
+#define ICSSG_FDB_ENTRY_AGEABLE               BIT(3)
+/* If set for DA then packet is determined to be a special packet */
+#define ICSSG_FDB_ENTRY_BLOCK                 BIT(4)
+/* If set for DA then the SA from the packet is not learned */
+#define ICSSG_FDB_ENTRY_SECURE                BIT(5)
+/* If set, it means packet has been seen recently with source address + FID
+ * matching MAC address/FID of entry
+ */
+#define ICSSG_FDB_ENTRY_TOUCHED               BIT(6)
+/* Set if entry is valid */
+#define ICSSG_FDB_ENTRY_VALID                 BIT(7)
+
+/**
+ * struct prueth_vlan_tbl - VLAN table entries struct in ICSSG SMEM
+ * @fid_c1: membership and forwarding rules flag to this table. See
+ *          above to defines for bit definitions
+ * @fid: FDB index for this VID (there is 1-1 mapping b/w VID and FID)
+ */
+struct prueth_vlan_tbl {
+	u8 fid_c1;
+	u8 fid;
+} __packed;
+
+/**
+ * struct prueth_fdb_slot - Result of FDB slot lookup
+ * @mac: MAC address
+ * @fid: fid to be associated with MAC
+ * @fid_c2: FID_C2 entry for this MAC
+ */
+struct prueth_fdb_slot {
+	u8 mac[ETH_ALEN];
+	u8 fid;
+	u8 fid_c2;
+} __packed;
+
+enum icssg_ietfpe_verify_states {
+	ICSSG_IETFPE_STATE_UNKNOWN = 0,
+	ICSSG_IETFPE_STATE_INITIAL,
+	ICSSG_IETFPE_STATE_VERIFYING,
+	ICSSG_IETFPE_STATE_SUCCEEDED,
+	ICSSG_IETFPE_STATE_FAILED,
+	ICSSG_IETFPE_STATE_DISABLED
+};
+#endif /* __NET_TI_ICSSG_CONFIG_H */
diff --git a/drivers/net/ethernet/ti/icssg_ethtool.c b/drivers/net/ethernet/ti/icssg_ethtool.c
new file mode 100644
index 000000000000..fd09d223b0ae
--- /dev/null
+++ b/drivers/net/ethernet/ti/icssg_ethtool.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Texas Instruments ICSSG Ethernet driver
+ *
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#include "icssg_prueth.h"
+#include <linux/regmap.h>
+
+static u32 stats_base[] = {	0x54c,	/* Slice 0 stats start */
+				0xb18,	/* Slice 1 stats start */
+};
+
+struct miig_stats_regs {
+	/* Rx */
+	u32 rx_good_frames;
+	u32 rx_broadcast_frames;
+	u32 rx_multicast_frames;
+	u32 rx_crc_error_frames;
+	u32 rx_mii_error_frames;
+	u32 rx_odd_nibble_frames;
+	u32 rx_frame_max_size;
+	u32 rx_max_size_error_frames;
+	u32 rx_frame_min_size;
+	u32 rx_min_size_error_frames;
+	u32 rx_overrun_frames;
+	u32 rx_class0_hits;
+	u32 rx_class1_hits;
+	u32 rx_class2_hits;
+	u32 rx_class3_hits;
+	u32 rx_class4_hits;
+	u32 rx_class5_hits;
+	u32 rx_class6_hits;
+	u32 rx_class7_hits;
+	u32 rx_class8_hits;
+	u32 rx_class9_hits;
+	u32 rx_class10_hits;
+	u32 rx_class11_hits;
+	u32 rx_class12_hits;
+	u32 rx_class13_hits;
+	u32 rx_class14_hits;
+	u32 rx_class15_hits;
+	u32 rx_smd_frags;
+	u32 rx_bucket1_size;
+	u32 rx_bucket2_size;
+	u32 rx_bucket3_size;
+	u32 rx_bucket4_size;
+	u32 rx_64B_frames;
+	u32 rx_bucket1_frames;
+	u32 rx_bucket2_frames;
+	u32 rx_bucket3_frames;
+	u32 rx_bucket4_frames;
+	u32 rx_bucket5_frames;
+	u32 rx_total_bytes;
+	u32 rx_tx_total_bytes;
+	/* Tx */
+	u32 tx_good_frames;
+	u32 tx_broadcast_frames;
+	u32 tx_multicast_frames;
+	u32 tx_odd_nibble_frames;
+	u32 tx_underflow_errors;
+	u32 tx_frame_max_size;
+	u32 tx_max_size_error_frames;
+	u32 tx_frame_min_size;
+	u32 tx_min_size_error_frames;
+	u32 tx_bucket1_size;
+	u32 tx_bucket2_size;
+	u32 tx_bucket3_size;
+	u32 tx_bucket4_size;
+	u32 tx_64B_frames;
+	u32 tx_bucket1_frames;
+	u32 tx_bucket2_frames;
+	u32 tx_bucket3_frames;
+	u32 tx_bucket4_frames;
+	u32 tx_bucket5_frames;
+	u32 tx_total_bytes;
+};
+
+#define ICSSG_STATS(field)				\
+{							\
+	#field,						\
+	offsetof(struct miig_stats_regs, field),	\
+}
+
+struct icssg_stats {
+	char name[ETH_GSTRING_LEN];
+	u32 offset;
+};
+
+static const struct icssg_stats icssg_ethtool_stats[] = {
+	/* Rx */
+	ICSSG_STATS(rx_good_frames),
+	ICSSG_STATS(rx_broadcast_frames),
+	ICSSG_STATS(rx_multicast_frames),
+	ICSSG_STATS(rx_crc_error_frames),
+	ICSSG_STATS(rx_mii_error_frames),
+	ICSSG_STATS(rx_odd_nibble_frames),
+	ICSSG_STATS(rx_frame_max_size),
+	ICSSG_STATS(rx_max_size_error_frames),
+	ICSSG_STATS(rx_frame_min_size),
+	ICSSG_STATS(rx_min_size_error_frames),
+	ICSSG_STATS(rx_overrun_frames),
+	ICSSG_STATS(rx_class0_hits),
+	ICSSG_STATS(rx_class1_hits),
+	ICSSG_STATS(rx_class2_hits),
+	ICSSG_STATS(rx_class3_hits),
+	ICSSG_STATS(rx_class4_hits),
+	ICSSG_STATS(rx_class5_hits),
+	ICSSG_STATS(rx_class6_hits),
+	ICSSG_STATS(rx_class7_hits),
+	ICSSG_STATS(rx_class8_hits),
+	ICSSG_STATS(rx_class9_hits),
+	ICSSG_STATS(rx_class10_hits),
+	ICSSG_STATS(rx_class11_hits),
+	ICSSG_STATS(rx_class12_hits),
+	ICSSG_STATS(rx_class13_hits),
+	ICSSG_STATS(rx_class14_hits),
+	ICSSG_STATS(rx_class15_hits),
+	ICSSG_STATS(rx_smd_frags),
+	ICSSG_STATS(rx_bucket1_size),
+	ICSSG_STATS(rx_bucket2_size),
+	ICSSG_STATS(rx_bucket3_size),
+	ICSSG_STATS(rx_bucket4_size),
+	ICSSG_STATS(rx_64B_frames),
+	ICSSG_STATS(rx_bucket1_frames),
+	ICSSG_STATS(rx_bucket2_frames),
+	ICSSG_STATS(rx_bucket3_frames),
+	ICSSG_STATS(rx_bucket4_frames),
+	ICSSG_STATS(rx_bucket5_frames),
+	ICSSG_STATS(rx_total_bytes),
+	ICSSG_STATS(rx_tx_total_bytes),
+	/* Tx */
+	ICSSG_STATS(tx_good_frames),
+	ICSSG_STATS(tx_broadcast_frames),
+	ICSSG_STATS(tx_multicast_frames),
+	ICSSG_STATS(tx_odd_nibble_frames),
+	ICSSG_STATS(tx_underflow_errors),
+	ICSSG_STATS(tx_frame_max_size),
+	ICSSG_STATS(tx_max_size_error_frames),
+	ICSSG_STATS(tx_frame_min_size),
+	ICSSG_STATS(tx_min_size_error_frames),
+	ICSSG_STATS(tx_bucket1_size),
+	ICSSG_STATS(tx_bucket2_size),
+	ICSSG_STATS(tx_bucket3_size),
+	ICSSG_STATS(tx_bucket4_size),
+	ICSSG_STATS(tx_64B_frames),
+	ICSSG_STATS(tx_bucket1_frames),
+	ICSSG_STATS(tx_bucket2_frames),
+	ICSSG_STATS(tx_bucket3_frames),
+	ICSSG_STATS(tx_bucket4_frames),
+	ICSSG_STATS(tx_bucket5_frames),
+	ICSSG_STATS(tx_total_bytes),
+};
+
+static void emac_get_drvinfo(struct net_device *ndev,
+			     struct ethtool_drvinfo *info)
+{
+	struct prueth_emac *emac = netdev_priv(ndev);
+	struct prueth *prueth = emac->prueth;
+
+	strscpy(info->driver, dev_driver_string(prueth->dev),
+		sizeof(info->driver));
+	strscpy(info->bus_info, dev_name(prueth->dev), sizeof(info->bus_info));
+}
+
+static u32 emac_get_msglevel(struct net_device *ndev)
+{
+	struct prueth_emac *emac = netdev_priv(ndev);
+
+	return emac->msg_enable;
+}
+
+static void emac_set_msglevel(struct net_device *ndev, u32 value)
+{
+	struct prueth_emac *emac = netdev_priv(ndev);
+
+	emac->msg_enable = value;
+}
+
+static int emac_get_link_ksettings(struct net_device *ndev,
+				   struct ethtool_link_ksettings *ecmd)
+{
+	return phy_ethtool_get_link_ksettings(ndev, ecmd);
+}
+
+static int emac_set_link_ksettings(struct net_device *ndev,
+				   const struct ethtool_link_ksettings *ecmd)
+{
+	return phy_ethtool_set_link_ksettings(ndev, ecmd);
+}
+
+static int emac_get_eee(struct net_device *ndev, struct ethtool_eee *edata)
+{
+	if (!ndev->phydev)
+		return -EOPNOTSUPP;
+
+	return phy_ethtool_get_eee(ndev->phydev, edata);
+}
+
+static int emac_set_eee(struct net_device *ndev, struct ethtool_eee *edata)
+{
+	if (!ndev->phydev)
+		return -EOPNOTSUPP;
+
+	return phy_ethtool_set_eee(ndev->phydev, edata);
+}
+
+static int emac_nway_reset(struct net_device *ndev)
+{
+	return phy_ethtool_nway_reset(ndev);
+}
+
+static const char emac_ethtool_priv_flags[][ETH_GSTRING_LEN] = {
+#define EMAC_PRIV_IET_FRAME_PREEMPTION  BIT(0)
+	"iet-frame-preemption",
+#define EMAC_PRIV_IET_MAC_VERIFY                BIT(1)
+	"iet-mac-verify",
+};
Please move the #define outside of the array. They are not easy to
see.
Sure, I'll move the #define to outside of the array.
This is how the structure would look like.

#define EMAC_PRIV_IET_FRAME_PREEMPTION  BIT(0)
#define EMAC_PRIV_IET_MAC_VERIFY		BIT(1)

static const char emac_ethtool_priv_flags[][ETH_GSTRING_LEN] = {
	"iet-frame-preemption",
	"iet-mac-verify",
};


	Andrew
Thanks and Regards,
Danish.

From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: [off-list ref]
X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
	aws-us-west-2-korg-lkml-1.web.codeaurora.org
Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133])
	(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
	(No client certificate requested)
	by smtp.lore.kernel.org (Postfix) with ESMTPS id 13488C43334
	for [off-list ref]; Sun,  5 Jun 2022 15:39:36 +0000 (UTC)
DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
	d=lists.infradead.org; s=bombadil.20210309; h=Sender:
	Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post:
	List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References:
	Message-ID:Subject:To:From:Date:Reply-To:Content-ID:Content-Description:
	Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:
	List-Owner; bh=b6fYa0q+XFwyIpbdKM0aAD9nKwyDSWVpkOMmA80Mzq4=; b=olQyG9xAfPyO0y
	vAK24MXpqlDj0lAj5hChVz0fLkJgC4quh9pGM4/44+YhRgd1I37AGAAlyVHxayUECyFmLPbOhXAhA
	iZbsNjL7uAcqj7t3J+dBL3BRQmgKGBpwEak18gYG7V+OnAOCvaQ3w+ccsYql0mlf96tMNK+JZTyZa
	qZdylMVGr8FKMbIFRyVZiE9wGsw0hLwZ64vIHOjs5SCqA8B6Qnq5AaXmpXLxLXgwj3IYg6IUIo3TP
	vFopdmNaVDm5xSbpMAQxrt49ita2lUHEzV41GfNocGgs3vSkn1T4uViaDIY5+mOwoOjDfK7lm3D1h
	LpsUsHl9aE5HlG5hMehA==;
Received: from localhost ([::1] helo=bombadil.infradead.org)
	by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux))
	id 1nxsKN-00ElzW-35; Sun, 05 Jun 2022 15:38:07 +0000
Received: from vps0.lunn.ch ([185.16.172.187])
	by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux))
	id 1nxsKH-00ElyS-AH
	for linux-arm-kernel@lists.infradead.org; Sun, 05 Jun 2022 15:38:05 +0000
DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lunn.ch;
	s=20171124; h=In-Reply-To:Content-Disposition:Content-Type:MIME-Version:
	References:Message-ID:Subject:Cc:To:From:Date:From:Sender:Reply-To:Subject:
	Date:Message-ID:To:Cc:MIME-Version:Content-Type:Content-Transfer-Encoding:
	Content-ID:Content-Description:Content-Disposition:In-Reply-To:References;
	bh=fage9o/WkrlxF6CHaFSVzs3PXs0ms4frqc7xdvWybXY=; b=Ld+ZYslRThTJYx7sMAt/vrjFI6
	IklFvvGj0QTnGKp/EkPLgktZvia+CIDqH9Imv+DaGiA5TyTs52f7vkeskXB7uj7d2HAOOmvf7NToQ
	nrLe9ZY8V0eos9i8IFGrSc3VLv6ivkVuHlzOCIqvXcDKoWtz9maiSDDZWQoAhLiDuS8o=;
Received: from andrew by vps0.lunn.ch with local (Exim 4.94.2)
	(envelope-from [off-list ref])
	id 1nxsKA-005eXu-EB; Sun, 05 Jun 2022 17:37:54 +0200
Date: Sun, 5 Jun 2022 17:37:54 +0200
From: Andrew Lunn <andrew@lunn.ch>
To: Puranjay Mohan <redacted>
Subject: Re: [PATCH v2 2/2] net: ti: icssg-prueth: Add ICSSG ethernet driver
Message-ID: [ref]
References: [ref]
 [ref]
MIME-Version: 1.0
Content-Disposition: inline
In-Reply-To: [ref]
X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 
X-CRM114-CacheID: sfid-20220605_083801_726047_1B97979E 
X-CRM114-Status: GOOD (  26.73  )
X-BeenThere: linux-arm-kernel@lists.infradead.org
X-Mailman-Version: 2.1.34
Precedence: list
List-Id: <linux-arm-kernel.lists.infradead.org>
List-Unsubscribe: <http://lists.infradead.org/mailman/options/linux-arm-kernel>,
 <mailto:linux-arm-kernel-request@lists.infradead.org?subject=unsubscribe>
List-Archive: <http://lists.infradead.org/pipermail/linux-arm-kernel/>
List-Post: <mailto:linux-arm-kernel@lists.infradead.org>
List-Help: <mailto:linux-arm-kernel-request@lists.infradead.org?subject=help>
List-Subscribe: <http://lists.infradead.org/mailman/listinfo/linux-arm-kernel>,
 <mailto:linux-arm-kernel-request@lists.infradead.org?subject=subscribe>
Cc: nm@ti.com, devicetree@vger.kernel.org, grygorii.strashko@ti.com, vigneshr@ti.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, kishon@ti.com, rogerq@kernel.org, afd@ti.com, edumazet@google.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, ssantosh@kernel.org, davem@davemloft.net, linux-arm-kernel@lists.infradead.org
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Sender: "linux-arm-kernel" [off-list ref]
Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
quoted
+static inline u32 addr_to_da0(const u8 *addr)
+{
+	return (u32)(addr[0] | addr[1] << 8 |
+		addr[2] << 16 | addr[3] << 24);
+};
+
+static inline u32 addr_to_da1(const u8 *addr)
+{
+	return (u32)(addr[4] | addr[5] << 8);
+};
No inline functions please.
quoted
+
+static void rx_class_ft1_set_start_len(struct regmap *miig_rt, int slice,
+				       u16 start, u8 len)
+{
+	u32 offset, val;
+
+	offset = offs[slice].ft1_start_len;
+	val = FT1_LEN(len) | FT1_START(start);
+	regmap_write(miig_rt, offset, val);
+}
+
+static void rx_class_ft1_set_da(struct regmap *miig_rt, int slice,
+				int n, const u8 *addr)
+{
+	u32 offset;
+
+	offset = FT1_N_REG(slice, n, FT1_DA0);
+	regmap_write(miig_rt, offset, addr_to_da0(addr));
+	offset = FT1_N_REG(slice, n, FT1_DA1);
+	regmap_write(miig_rt, offset, addr_to_da1(addr));
+}
+
+static void rx_class_ft1_set_da_mask(struct regmap *miig_rt, int slice,
+				     int n, const u8 *addr)
+{
+	u32 offset;
+
+	offset = FT1_N_REG(slice, n, FT1_DA0_MASK);
+	regmap_write(miig_rt, offset, addr_to_da0(addr));
+	offset = FT1_N_REG(slice, n, FT1_DA1_MASK);
+	regmap_write(miig_rt, offset, addr_to_da1(addr));
+}
+
+static void rx_class_ft1_cfg_set_type(struct regmap *miig_rt, int slice, int n,
+				      enum ft1_cfg_type type)
+{
+	u32 offset;
+
+	offset = offs[slice].ft1_cfg;
+	regmap_update_bits(miig_rt, offset, FT1_CFG_MASK(n),
+			   type << FT1_CFG_SHIFT(n));
+}
+
+static void rx_class_sel_set_type(struct regmap *miig_rt, int slice, int n,
+				  enum rx_class_sel_type type)
+{
+	u32 offset;
+
+	offset = offs[slice].rx_class_cfg1;
+	regmap_update_bits(miig_rt, offset, RX_CLASS_SEL_MASK(n),
+			   type << RX_CLASS_SEL_SHIFT(n));
+}
+
+static void rx_class_set_and(struct regmap *miig_rt, int slice, int n,
+			     u32 data)
+{
+	u32 offset;
+
+	offset = RX_CLASS_N_REG(slice, n, RX_CLASS_AND_EN);
+	regmap_write(miig_rt, offset, data);
+}
+
+static void rx_class_set_or(struct regmap *miig_rt, int slice, int n,
+			    u32 data)
+{
+	u32 offset;
+
+	offset = RX_CLASS_N_REG(slice, n, RX_CLASS_OR_EN);
+	regmap_write(miig_rt, offset, data);
+}
+
+void icssg_class_set_host_mac_addr(struct regmap *miig_rt, const u8 *mac)
+{
+	regmap_write(miig_rt, MAC_INTERFACE_0, addr_to_da0(mac));
+	regmap_write(miig_rt, MAC_INTERFACE_1, addr_to_da1(mac));
+}
+
+void icssg_class_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac)
+{
+	regmap_write(miig_rt, offs[slice].mac0, addr_to_da0(mac));
+	regmap_write(miig_rt, offs[slice].mac1, addr_to_da1(mac));
+}
+
+/* disable all RX traffic */
+void icssg_class_disable(struct regmap *miig_rt, int slice)
+{
+	u32 data, offset;
+	int n;
+
+	/* Enable RX_L2_G */
+	regmap_update_bits(miig_rt, ICSSG_CFG_OFFSET, ICSSG_CFG_RX_L2_G_EN,
+			   ICSSG_CFG_RX_L2_G_EN);
+
+	for (n = 0; n < ICSSG_NUM_CLASSIFIERS; n++) {
+		/* AND_EN = 0 */
+		rx_class_set_and(miig_rt, slice, n, 0);
+		/* OR_EN = 0 */
+		rx_class_set_or(miig_rt, slice, n, 0);
+
+		/* set CFG1 to OR */
+		rx_class_sel_set_type(miig_rt, slice, n, RX_CLASS_SEL_TYPE_OR);
+
+		/* configure gate */
+		offset = RX_CLASS_GATES_N_REG(slice, n);
+		regmap_read(miig_rt, offset, &data);
+		/* clear class_raw so we go through filters */
+		data &= ~RX_CLASS_GATES_RAW_MASK;
+		/* set allow and phase mask */
+		data |= RX_CLASS_GATES_ALLOW_MASK | RX_CLASS_GATES_PHASE_MASK;
+		regmap_write(miig_rt, offset, data);
+	}
+
+	/* FT1 Disabled */
+	for (n = 0; n < ICSSG_NUM_FT1_SLOTS; n++) {
+		u8 addr[] = { 0, 0, 0, 0, 0, 0, };
+
+		rx_class_ft1_cfg_set_type(miig_rt, slice, n,
+					  FT1_CFG_TYPE_DISABLED);
+		rx_class_ft1_set_da(miig_rt, slice, n, addr);
+		rx_class_ft1_set_da_mask(miig_rt, slice, n, addr);
+	}
+
+	/* clear CFG2 */
+	regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
+}
+
+void icssg_class_default(struct regmap *miig_rt, int slice, bool allmulti)
+{
+	int classifiers_in_use = 1;
+	u32 data;
+	int n;
+
+	/* defaults */
+	icssg_class_disable(miig_rt, slice);
+
+	/* Setup Classifier */
+	for (n = 0; n < classifiers_in_use; n++) {
+		/* match on Broadcast or MAC_PRU address */
+		data = RX_CLASS_FT_BC | RX_CLASS_FT_DA_P;
+
+		/* multicast? */
+		if (allmulti)
+			data |= RX_CLASS_FT_MC;
+
+		rx_class_set_or(miig_rt, slice, n, data);
+
+		/* set CFG1 for OR_OR_AND for classifier */
+		rx_class_sel_set_type(miig_rt, slice, n,
+				      RX_CLASS_SEL_TYPE_OR_OR_AND);
+	}
+
+	/* clear CFG2 */
+	regmap_write(miig_rt, offs[slice].rx_class_cfg2, 0);
+}
+
+/* required for SAV check */
+void icssg_ft1_set_mac_addr(struct regmap *miig_rt, int slice, u8 *mac_addr)
+{
+	u8 mask_addr[] = { 0, 0, 0, 0, 0, 0, };
+
+	rx_class_ft1_set_start_len(miig_rt, slice, 0, 6);
+	rx_class_ft1_set_da(miig_rt, slice, 0, mac_addr);
+	rx_class_ft1_set_da_mask(miig_rt, slice, 0, mask_addr);
+	rx_class_ft1_cfg_set_type(miig_rt, slice, 0, FT1_CFG_TYPE_EQ);
+}
diff --git a/drivers/net/ethernet/ti/icssg_config.c b/drivers/net/ethernet/ti/icssg_config.c
new file mode 100644
index 000000000000..a88ea4933802
--- /dev/null
+++ b/drivers/net/ethernet/ti/icssg_config.c
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0
+/* ICSSG Ethernet driver
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com
+ */
+
+#include <linux/iopoll.h>
+#include <linux/regmap.h>
+#include <uapi/linux/if_ether.h>
+#include "icssg_config.h"
+#include "icssg_prueth.h"
+#include "icssg_switch_map.h"
+#include "icssg_mii_rt.h"
+
+/* TX IPG Values to be set for 100M link speed. These values are
+ * in ocp_clk cycles. So need change if ocp_clk is changed for a specific
+ * h/w design.
+ */
+
+/* IPG is in core_clk cycles */
+#define MII_RT_TX_IPG_100M	0x17
+#define MII_RT_TX_IPG_1G	0xb
+
+#define	ICSSG_QUEUES_MAX		64
+#define	ICSSG_QUEUE_OFFSET		0xd00
+#define	ICSSG_QUEUE_PEEK_OFFSET		0xe00
+#define	ICSSG_QUEUE_CNT_OFFSET		0xe40
+#define	ICSSG_QUEUE_RESET_OFFSET	0xf40
+
+#define	ICSSG_NUM_TX_QUEUES	8
+
+#define	RECYCLE_Q_SLICE0	16
+#define	RECYCLE_Q_SLICE1	17
+
+#define	ICSSG_NUM_OTHER_QUEUES	5	/* port, host and special queues */
+
+#define	PORT_HI_Q_SLICE0	32
+#define	PORT_LO_Q_SLICE0	33
+#define	HOST_HI_Q_SLICE0	34
+#define	HOST_LO_Q_SLICE0	35
+#define	HOST_SPL_Q_SLICE0	40	/* Special Queue */
+
+#define	PORT_HI_Q_SLICE1	36
+#define	PORT_LO_Q_SLICE1	37
+#define	HOST_HI_Q_SLICE1	38
+#define	HOST_LO_Q_SLICE1	39
+#define	HOST_SPL_Q_SLICE1	41	/* Special Queue */
+
+#define MII_RXCFG_DEFAULT	(PRUSS_MII_RT_RXCFG_RX_ENABLE | \
+				 PRUSS_MII_RT_RXCFG_RX_DATA_RDY_MODE_DIS | \
+				 PRUSS_MII_RT_RXCFG_RX_L2_EN | \
+				 PRUSS_MII_RT_RXCFG_RX_L2_EOF_SCLR_DIS)
+
+#define MII_TXCFG_DEFAULT	(PRUSS_MII_RT_TXCFG_TX_ENABLE | \
+				 PRUSS_MII_RT_TXCFG_TX_AUTO_PREAMBLE | \
+				 PRUSS_MII_RT_TXCFG_TX_32_MODE_EN | \
+				 PRUSS_MII_RT_TXCFG_TX_IPG_WIRE_CLK_EN)
+
+#define ICSSG_CFG_DEFAULT	(ICSSG_CFG_TX_L1_EN | \
+				 ICSSG_CFG_TX_L2_EN | ICSSG_CFG_RX_L2_G_EN | \
+				 ICSSG_CFG_TX_PRU_EN | \
+				 ICSSG_CFG_SGMII_MODE)
+
+#define FDB_GEN_CFG1		0x60
+#define SMEM_VLAN_OFFSET	8
+#define SMEM_VLAN_OFFSET_MASK	GENMASK(25, 8)
+
+#define FDB_GEN_CFG2		0x64
+#define FDB_VLAN_EN		BIT(6)
+#define FDB_HOST_EN		BIT(2)
+#define FDB_PRU1_EN		BIT(1)
+#define FDB_PRU0_EN		BIT(0)
+#define FDB_EN_ALL		(FDB_PRU0_EN | FDB_PRU1_EN | \
+				 FDB_HOST_EN | FDB_VLAN_EN)
+
+struct map {
+	int queue;
+	u32 pd_addr_start;
+	u32 flags;
+	bool special;
+};
+
+struct map hwq_map[2][ICSSG_NUM_OTHER_QUEUES] = {
+	{
+		{ PORT_HI_Q_SLICE0, PORT_DESC0_HI, 0x200000, 0 },
+		{ PORT_LO_Q_SLICE0, PORT_DESC0_LO, 0, 0 },
+		{ HOST_HI_Q_SLICE0, HOST_DESC0_HI, 0x200000, 0 },
+		{ HOST_LO_Q_SLICE0, HOST_DESC0_LO, 0, 0 },
+		{ HOST_SPL_Q_SLICE0, HOST_SPPD0, 0x400000, 1 },
+	},
+	{
+		{ PORT_HI_Q_SLICE1, PORT_DESC1_HI, 0xa00000, 0 },
+		{ PORT_LO_Q_SLICE1, PORT_DESC1_LO, 0x800000, 0 },
+		{ HOST_HI_Q_SLICE1, HOST_DESC1_HI, 0xa00000, 0 },
+		{ HOST_LO_Q_SLICE1, HOST_DESC1_LO, 0x800000, 0 },
+		{ HOST_SPL_Q_SLICE1, HOST_SPPD1, 0xc00000, 1 },
+	},
+};
+
+static void icssg_config_mii_init(struct prueth_emac *emac)
+{
+	struct prueth *prueth = emac->prueth;
+	struct regmap *mii_rt = prueth->mii_rt;
+	int slice = prueth_emac_slice(emac);
+	u32 rxcfg_reg, txcfg_reg, pcnt_reg;
+	u32 rxcfg, txcfg;
+
+	rxcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RXCFG0 :
+				       PRUSS_MII_RT_RXCFG1;
+	txcfg_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_TXCFG0 :
+				       PRUSS_MII_RT_TXCFG1;
+	pcnt_reg = (slice == ICSS_MII0) ? PRUSS_MII_RT_RX_PCNT0 :
+				       PRUSS_MII_RT_RX_PCNT1;
+
+	rxcfg = MII_RXCFG_DEFAULT;
+	txcfg = MII_TXCFG_DEFAULT;
+
+	if (slice == ICSS_MII1)
+		rxcfg |= PRUSS_MII_RT_RXCFG_RX_MUX_SEL;
+
+	/* In MII mode TX lines swapped inside ICSSG, so TX_MUX_SEL cfg need
+	 * to be swapped also comparing to RGMII mode.
+	 */
+	if (emac->phy_if == PHY_INTERFACE_MODE_MII && slice == ICSS_MII0)
+		txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
+	else if (emac->phy_if != PHY_INTERFACE_MODE_MII && slice == ICSS_MII1)
+		txcfg |= PRUSS_MII_RT_TXCFG_TX_MUX_SEL;
+
+	regmap_write(mii_rt, rxcfg_reg, rxcfg);
+	regmap_write(mii_rt, txcfg_reg, txcfg);
+	regmap_write(mii_rt, pcnt_reg, 0x1);
+}
+
+static void icssg_miig_queues_init(struct prueth *prueth, int slice)
+{
+	struct regmap *miig_rt = prueth->miig_rt;
+	void __iomem *smem = prueth->shram.va;
+	u8 pd[ICSSG_SPECIAL_PD_SIZE];
+	int queue = 0, i, j;
+	u32 *pdword;
+
+	/* reset hwqueues */
+	if (slice)
+		queue = ICSSG_NUM_TX_QUEUES;
+
+	for (i = 0; i < ICSSG_NUM_TX_QUEUES; i++) {
+		regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
+		queue++;
+	}
+
+	queue = slice ? RECYCLE_Q_SLICE1 : RECYCLE_Q_SLICE0;
+	regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET, queue);
+
+	for (i = 0; i < ICSSG_NUM_OTHER_QUEUES; i++) {
+		regmap_write(miig_rt, ICSSG_QUEUE_RESET_OFFSET,
+			     hwq_map[slice][i].queue);
+	}
+
+	/* initialize packet descriptors in SMEM */
+	/* push pakcet descriptors to hwqueues */
+
+	pdword = (u32 *)pd;
+	for (j = 0; j < ICSSG_NUM_OTHER_QUEUES; j++) {
+		struct map *mp;
+		int pd_size, num_pds;
+		u32 pdaddr;
+
+		mp = &hwq_map[slice][j];
+		if (mp->special) {
+			pd_size = ICSSG_SPECIAL_PD_SIZE;
+			num_pds = ICSSG_NUM_SPECIAL_PDS;
+		} else	{
+			pd_size = ICSSG_NORMAL_PD_SIZE;
+			num_pds = ICSSG_NUM_NORMAL_PDS;
+		}
+
+		for (i = 0; i < num_pds; i++) {
+			memset(pd, 0, pd_size);
+
+			pdword[0] &= cpu_to_le32(ICSSG_FLAG_MASK);
+			pdword[0] |= cpu_to_le32(mp->flags);
+			pdaddr = mp->pd_addr_start + i * pd_size;
+
+			memcpy_toio(smem + pdaddr, pd, pd_size);
+			queue = mp->queue;
+			regmap_write(miig_rt, ICSSG_QUEUE_OFFSET + 4 * queue,
+				     pdaddr);
+		}
+	}
+}
+
+void icssg_config_ipg(struct prueth_emac *emac)
+{
+	struct prueth *prueth = emac->prueth;
+	int slice = prueth_emac_slice(emac);
+
+	switch (emac->speed) {
+	case SPEED_1000:
+		icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_1G);
+		break;
+	case SPEED_100:
+		icssg_mii_update_ipg(prueth->mii_rt, slice, MII_RT_TX_IPG_100M);
+		break;
+	default:
+		/* Other links speeds not supported */
+		netdev_err(emac->ndev, "Unsupported link speed\n");
+		return;
+	}
+}
+
+static void emac_r30_cmd_init(struct prueth_emac *emac)
+{
+	int i;
+	struct icssg_r30_cmd *p;
+
+	p = emac->dram.va + MGR_R30_CMD_OFFSET;
+
+	for (i = 0; i < 4; i++)
+		writel(EMAC_NONE, &p->cmd[i]);
+}
+
+static int emac_r30_is_done(struct prueth_emac *emac)
+{
+	const struct icssg_r30_cmd *p;
+	int i;
+	u32 cmd;
+
+	p = emac->dram.va + MGR_R30_CMD_OFFSET;
+
+	for (i = 0; i < 4; i++) {
+		cmd = readl(&p->cmd[i]);
+		if (cmd != EMAC_NONE)
+			return 0;
+	}
+
+	return 1;
+}
+
+static int prueth_emac_buffer_setup(struct prueth_emac *emac)
+{
+	struct icssg_buffer_pool_cfg *bpool_cfg;
+	struct prueth *prueth = emac->prueth;
+	int slice = prueth_emac_slice(emac);
+	struct icssg_rxq_ctx *rxq_ctx;
+	u32 addr;
+	int i;
+
+	/* Layout to have 64KB aligned buffer pool
+	 * |BPOOL0|BPOOL1|RX_CTX0|RX_CTX1|
+	 */
+
+	addr = lower_32_bits(prueth->msmcram.pa);
+	if (slice)
+		addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
+
+	if (addr % SZ_64K) {
+		dev_warn(prueth->dev, "buffer pool needs to be 64KB aligned\n");
+		return -EINVAL;
+	}
+
+	bpool_cfg = emac->dram.va + BUFFER_POOL_0_ADDR_OFFSET;
+	/* workaround for f/w bug. bpool 0 needs to be initilalized */
+	bpool_cfg[0].addr = cpu_to_le32(addr);
+	bpool_cfg[0].len = 0;
+
+	for (i = PRUETH_EMAC_BUF_POOL_START;
+	     i < (PRUETH_EMAC_BUF_POOL_START + PRUETH_NUM_BUF_POOLS);
+	     i++) {
+		bpool_cfg[i].addr = cpu_to_le32(addr);
+		bpool_cfg[i].len = cpu_to_le32(PRUETH_EMAC_BUF_POOL_SIZE);
+		addr += PRUETH_EMAC_BUF_POOL_SIZE;
+	}
+
+	if (!slice)
+		addr += PRUETH_NUM_BUF_POOLS * PRUETH_EMAC_BUF_POOL_SIZE;
+	else
+		addr += PRUETH_EMAC_RX_CTX_BUF_SIZE * 2;
+
+	/* Pre-emptible RX buffer queue */
+	rxq_ctx = emac->dram.va + HOST_RX_Q_PRE_CONTEXT_OFFSET;
+	for (i = 0; i < 3; i++)
+		rxq_ctx->start[i] = cpu_to_le32(addr);
+
+	addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
+	rxq_ctx->end = cpu_to_le32(addr);
+
+	/* Express RX buffer queue */
+	rxq_ctx = emac->dram.va + HOST_RX_Q_EXP_CONTEXT_OFFSET;
+	for (i = 0; i < 3; i++)
+		rxq_ctx->start[i] = cpu_to_le32(addr);
+
+	addr += PRUETH_EMAC_RX_CTX_BUF_SIZE;
+	rxq_ctx->end = cpu_to_le32(addr);
+
+	return 0;
+}
+
+static void icssg_init_emac_mode(struct prueth *prueth)
+{
+	/* When the device is configured as a bridge and it is being brought back
+	 * to the emac mode, the host mac address has to be set as 0.
+	 */
+	u8 mac[ETH_ALEN] = { 0 };
+
+	if (prueth->emacs_initialized)
+		return;
+
+	regmap_update_bits(prueth->miig_rt, FDB_GEN_CFG1, SMEM_VLAN_OFFSET_MASK, 0);
+	regmap_write(prueth->miig_rt, FDB_GEN_CFG2, 0);
+	/* Clear host MAC address */
+	icssg_class_set_host_mac_addr(prueth->miig_rt, mac);
+}
+
+int icssg_config(struct prueth *prueth, struct prueth_emac *emac, int slice)
+{
+	void *config = emac->dram.va + ICSSG_CONFIG_OFFSET;
+	u8 *cfg_byte_ptr = config;
+	struct icssg_flow_cfg *flow_cfg;
+	u32 mask;
+	int ret;
+
+	icssg_init_emac_mode(prueth);
+
+	memset_io(config, 0, TAS_GATE_MASK_LIST0);
+	icssg_miig_queues_init(prueth, slice);
+
+	emac->speed = SPEED_1000;
+	emac->duplex = DUPLEX_FULL;
+	if (!phy_interface_mode_is_rgmii(emac->phy_if)) {
+		emac->speed = SPEED_100;
+		emac->duplex = DUPLEX_FULL;
+	}
+	regmap_update_bits(prueth->miig_rt, ICSSG_CFG_OFFSET, ICSSG_CFG_DEFAULT, ICSSG_CFG_DEFAULT);
+	icssg_miig_set_interface_mode(prueth->miig_rt, slice, emac->phy_if);
+	icssg_config_mii_init(emac);
+	icssg_config_ipg(emac);
+	icssg_update_rgmii_cfg(prueth->miig_rt, emac);
+
+	/* set GPI mode */
+	pruss_cfg_gpimode(prueth->pruss, prueth->pru_id[slice],
+			  PRUSS_GPI_MODE_MII);
+
+	/* enable XFR shift for PRU and RTU */
+	mask = PRUSS_SPP_XFER_SHIFT_EN | PRUSS_SPP_RTU_XFR_SHIFT_EN;
+	pruss_cfg_update(prueth->pruss, PRUSS_CFG_SPP, mask, mask);
+
+	/* set C28 to 0x100 */
+	pru_rproc_set_ctable(prueth->pru[slice], PRU_C28, 0x100 << 8);
+	pru_rproc_set_ctable(prueth->rtu[slice], PRU_C28, 0x100 << 8);
+	pru_rproc_set_ctable(prueth->txpru[slice], PRU_C28, 0x100 << 8);
+
+	flow_cfg = config + PSI_L_REGULAR_FLOW_ID_BASE_OFFSET;
+	flow_cfg->rx_base_flow = cpu_to_le32(emac->rx_flow_id_base);
+	flow_cfg->mgm_base_flow = 0;
+	*(cfg_byte_ptr + SPL_PKT_DEFAULT_PRIORITY) = 0;
+	*(cfg_byte_ptr + QUEUE_NUM_UNTAGGED) = 0x0;
+
+	ret = prueth_emac_buffer_setup(emac);
+	if (ret)
+		return ret;
+
+	emac_r30_cmd_init(emac);
+
+	return 0;
+}
+
+static struct icssg_r30_cmd emac_r32_bitmask[] = {
+	{{0xffff0004, 0xffff0100, 0xffff0100, EMAC_NONE}},	/* EMAC_PORT_DISABLE */
+	{{0xfffb0040, 0xfeff0200, 0xfeff0200, EMAC_NONE}},	/* EMAC_PORT_BLOCK */
+	{{0xffbb0000, 0xfcff0000, 0xdcff0000, EMAC_NONE}},	/* EMAC_PORT_FORWARD */
+	{{0xffbb0000, 0xfcff0000, 0xfcff2000, EMAC_NONE}},	/* EMAC_PORT_FORWARD_WO_LEARNING */
+	{{0xffff0001, EMAC_NONE,  EMAC_NONE, EMAC_NONE}},	/* ACCEPT ALL */
+	{{0xfffe0002, EMAC_NONE,  EMAC_NONE, EMAC_NONE}},	/* ACCEPT TAGGED */
+	{{0xfffc0000, EMAC_NONE,  EMAC_NONE, EMAC_NONE}},	/* ACCEPT UNTAGGED and PRIO */
+	{{EMAC_NONE,  0xffff0020, EMAC_NONE, EMAC_NONE}},	/* TAS Trigger List change */
+	{{EMAC_NONE,  0xdfff1000, EMAC_NONE, EMAC_NONE}},	/* TAS set state ENABLE*/
+	{{EMAC_NONE,  0xefff2000, EMAC_NONE, EMAC_NONE}},	/* TAS set state RESET*/
+	{{EMAC_NONE,  0xcfff0000, EMAC_NONE, EMAC_NONE}},	/* TAS set state DISABLE*/
+	{{EMAC_NONE,  EMAC_NONE,  0xffff0400, EMAC_NONE}},	/* UC flooding ENABLE*/
+	{{EMAC_NONE,  EMAC_NONE,  0xfbff0000, EMAC_NONE}},	/* UC flooding DISABLE*/
+	{{EMAC_NONE,  EMAC_NONE,  0xffff0800, EMAC_NONE}},	/* MC flooding ENABLE*/
+	{{EMAC_NONE,  EMAC_NONE,  0xf7ff0000, EMAC_NONE}},	/* MC flooding DISABLE*/
+	{{EMAC_NONE,  0xffff4000, EMAC_NONE, EMAC_NONE}},	/* Preemption on Tx ENABLE*/
+	{{EMAC_NONE,  0xbfff0000, EMAC_NONE, EMAC_NONE}},	/* Preemption on Tx DISABLE*/
+	{{0xffff0010,  EMAC_NONE, 0xffff0010, EMAC_NONE}},	/* VLAN AWARE*/
+	{{0xffef0000,  EMAC_NONE, 0xffef0000, EMAC_NONE}}	/* VLAN UNWARE*/
+};
+
+int emac_set_port_state(struct prueth_emac *emac,
+			enum icssg_port_state_cmd cmd)
+{
+	struct icssg_r30_cmd *p;
+	int ret = -ETIMEDOUT;
+	int done = 0;
+	int i;
+
+	p = emac->dram.va + MGR_R30_CMD_OFFSET;
+
+	if (cmd >= ICSSG_EMAC_PORT_MAX_COMMANDS) {
+		netdev_err(emac->ndev, "invalid port command\n");
+		return -EINVAL;
+	}
+
+	/* only one command at a time allowed to firmware */
+	mutex_lock(&emac->cmd_lock);
+
+	for (i = 0; i < 4; i++)
+		writel(emac_r32_bitmask[cmd].cmd[i], &p->cmd[i]);
+
+	/* wait for done */
+	ret = read_poll_timeout(emac_r30_is_done, done, done == 1,
+				1000, 10000, false, emac);
+
+	if (ret == -ETIMEDOUT)
+		netdev_err(emac->ndev, "timeout waiting for command done\n");
+
+	mutex_unlock(&emac->cmd_lock);
+
+	return ret;
+}
+
+void icssg_config_set_speed(struct prueth_emac *emac)
+{
+	u8 fw_speed;
+
+	switch (emac->speed) {
+	case SPEED_1000:
+		fw_speed = FW_LINK_SPEED_1G;
+		break;
+	case SPEED_100:
+		fw_speed = FW_LINK_SPEED_100M;
+		break;
+	default:
+		/* Other links speeds not supported */
+		netdev_err(emac->ndev, "Unsupported link speed\n");
+		return;
+	}
+
+	writeb(fw_speed, emac->dram.va + PORT_LINK_SPEED_OFFSET);
+}
diff --git a/drivers/net/ethernet/ti/icssg_config.h b/drivers/net/ethernet/ti/icssg_config.h
new file mode 100644
index 000000000000..43eb0922172a
--- /dev/null
+++ b/drivers/net/ethernet/ti/icssg_config.h
@@ -0,0 +1,200 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Texas Instruments ICSSG Ethernet driver
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#ifndef __NET_TI_ICSSG_CONFIG_H
+#define __NET_TI_ICSSG_CONFIG_H
+
+struct icssg_buffer_pool_cfg {
+	__le32	addr;
+	__le32	len;
+} __packed;
+
+struct icssg_flow_cfg {
+	__le16 rx_base_flow;
+	__le16 mgm_base_flow;
+} __packed;
+
+#define PRUETH_PKT_TYPE_CMD	0x10
+#define PRUETH_NAV_PS_DATA_SIZE	16	/* Protocol specific data size */
+#define PRUETH_NAV_SW_DATA_SIZE	16	/* SW related data size */
+#define PRUETH_MAX_TX_DESC	512
+#define PRUETH_MAX_RX_DESC	512
+#define PRUETH_MAX_RX_FLOWS	1	/* excluding default flow */
+#define PRUETH_RX_FLOW_DATA	0
+
+#define PRUETH_EMAC_BUF_POOL_SIZE	SZ_8K
+#define PRUETH_EMAC_POOLS_PER_SLICE	24
+#define PRUETH_EMAC_BUF_POOL_START	8
+#define PRUETH_NUM_BUF_POOLS	8
+#define PRUETH_EMAC_RX_CTX_BUF_SIZE	SZ_16K	/* per slice */
+#define MSMC_RAM_SIZE	\
+	(2 * (PRUETH_EMAC_BUF_POOL_SIZE * PRUETH_NUM_BUF_POOLS + \
+	 PRUETH_EMAC_RX_CTX_BUF_SIZE * 2))
+
+struct icssg_rxq_ctx {
+	__le32 start[3];
+	__le32 end;
+} __packed;
+
+/* Load time Fiwmware Configuration */
+
+#define ICSSG_FW_MGMT_CMD_HEADER	0x81
+#define ICSSG_FW_MGMT_FDB_CMD_TYPE	0x03
+#define ICSSG_FW_MGMT_CMD_TYPE		0x04
+#define ICSSG_FW_MGMT_PKT		0x80000000
+
+struct icssg_r30_cmd {
+	u32 cmd[4];
+} __packed;
+
+enum icssg_port_state_cmd {
+	ICSSG_EMAC_PORT_DISABLE = 0,
+	ICSSG_EMAC_PORT_BLOCK,
+	ICSSG_EMAC_PORT_FORWARD,
+	ICSSG_EMAC_PORT_FORWARD_WO_LEARNING,
+	ICSSG_EMAC_PORT_ACCEPT_ALL,
+	ICSSG_EMAC_PORT_ACCEPT_TAGGED,
+	ICSSG_EMAC_PORT_ACCEPT_UNTAGGED_N_PRIO,
+	ICSSG_EMAC_PORT_TAS_TRIGGER,
+	ICSSG_EMAC_PORT_TAS_ENABLE,
+	ICSSG_EMAC_PORT_TAS_RESET,
+	ICSSG_EMAC_PORT_TAS_DISABLE,
+	ICSSG_EMAC_PORT_UC_FLOODING_ENABLE,
+	ICSSG_EMAC_PORT_UC_FLOODING_DISABLE,
+	ICSSG_EMAC_PORT_MC_FLOODING_ENABLE,
+	ICSSG_EMAC_PORT_MC_FLOODING_DISABLE,
+	ICSSG_EMAC_PORT_PREMPT_TX_ENABLE,
+	ICSSG_EMAC_PORT_PREMPT_TX_DISABLE,
+	ICSSG_EMAC_PORT_VLAN_AWARE_ENABLE,
+	ICSSG_EMAC_PORT_VLAN_AWARE_DISABLE,
+	ICSSG_EMAC_PORT_MAX_COMMANDS
+};
+
+#define EMAC_NONE           0xffff0000
+#define EMAC_PRU0_P_DI      0xffff0004
+#define EMAC_PRU1_P_DI      0xffff0040
+#define EMAC_TX_P_DI        0xffff0100
+
+#define EMAC_PRU0_P_EN      0xfffb0000
+#define EMAC_PRU1_P_EN      0xffbf0000
+#define EMAC_TX_P_EN        0xfeff0000
+
+#define EMAC_P_BLOCK        0xffff0040
+#define EMAC_TX_P_BLOCK     0xffff0200
+#define EMAC_P_UNBLOCK      0xffbf0000
+#define EMAC_TX_P_UNBLOCK   0xfdff0000
+#define EMAC_LEAN_EN        0xfff70000
+#define EMAC_LEAN_DI        0xffff0008
+
+#define EMAC_ACCEPT_ALL     0xffff0001
+#define EMAC_ACCEPT_TAG     0xfffe0002
+#define EMAC_ACCEPT_PRIOR   0xfffc0000
+
+/* Config area lies in DRAM */
+#define ICSSG_CONFIG_OFFSET	0x0
+
+/* Config area lies in shared RAM */
+#define ICSSG_CONFIG_OFFSET_SLICE0   0
+#define ICSSG_CONFIG_OFFSET_SLICE1   0x8000
+
+#define ICSSG_NUM_NORMAL_PDS	64
+#define ICSSG_NUM_SPECIAL_PDS	16
+
+#define ICSSG_NORMAL_PD_SIZE	8
+#define ICSSG_SPECIAL_PD_SIZE	20
+
+#define ICSSG_FLAG_MASK		0xff00ffff
+
+struct icssg_setclock_desc {
+	u8 request;
+	u8 restore;
+	u8 acknowledgment;
+	u8 cmp_status;
+	u32 margin;
+	u32 cyclecounter0_set;
+	u32 cyclecounter1_set;
+	u32 iepcount_set;
+	u32 rsvd1;
+	u32 rsvd2;
+	u32 CMP0_current;
+	u32 iepcount_current;
+	u32 difference;
+	u32 cyclecounter0_new;
+	u32 cyclecounter1_new;
+	u32 CMP0_new;
+} __packed;
+
+#define ICSSG_CMD_POP_SLICE0	56
+#define ICSSG_CMD_POP_SLICE1	60
+
+#define ICSSG_CMD_PUSH_SLICE0	57
+#define ICSSG_CMD_PUSH_SLICE1	61
+
+#define ICSSG_RSP_POP_SLICE0	58
+#define ICSSG_RSP_POP_SLICE1	62
+
+#define ICSSG_RSP_PUSH_SLICE0	56
+#define ICSSG_RSP_PUSH_SLICE1	60
+
+#define ICSSG_TS_POP_SLICE0	59
+#define ICSSG_TS_POP_SLICE1	63
+
+#define ICSSG_TS_PUSH_SLICE0	40
+#define ICSSG_TS_PUSH_SLICE1	41
+
+/* FDB FID_C2 flag definitions */
+/* Indicates host port membership.*/
+#define ICSSG_FDB_ENTRY_P0_MEMBERSHIP         BIT(0)
+/* Indicates that MAC ID is connected to physical port 1 */
+#define ICSSG_FDB_ENTRY_P1_MEMBERSHIP         BIT(1)
+/* Indicates that MAC ID is connected to physical port 2 */
+#define ICSSG_FDB_ENTRY_P2_MEMBERSHIP         BIT(2)
+/* Ageable bit is set for learned entries and cleared for static entries */
+#define ICSSG_FDB_ENTRY_AGEABLE               BIT(3)
+/* If set for DA then packet is determined to be a special packet */
+#define ICSSG_FDB_ENTRY_BLOCK                 BIT(4)
+/* If set for DA then the SA from the packet is not learned */
+#define ICSSG_FDB_ENTRY_SECURE                BIT(5)
+/* If set, it means packet has been seen recently with source address + FID
+ * matching MAC address/FID of entry
+ */
+#define ICSSG_FDB_ENTRY_TOUCHED               BIT(6)
+/* Set if entry is valid */
+#define ICSSG_FDB_ENTRY_VALID                 BIT(7)
+
+/**
+ * struct prueth_vlan_tbl - VLAN table entries struct in ICSSG SMEM
+ * @fid_c1: membership and forwarding rules flag to this table. See
+ *          above to defines for bit definitions
+ * @fid: FDB index for this VID (there is 1-1 mapping b/w VID and FID)
+ */
+struct prueth_vlan_tbl {
+	u8 fid_c1;
+	u8 fid;
+} __packed;
+
+/**
+ * struct prueth_fdb_slot - Result of FDB slot lookup
+ * @mac: MAC address
+ * @fid: fid to be associated with MAC
+ * @fid_c2: FID_C2 entry for this MAC
+ */
+struct prueth_fdb_slot {
+	u8 mac[ETH_ALEN];
+	u8 fid;
+	u8 fid_c2;
+} __packed;
+
+enum icssg_ietfpe_verify_states {
+	ICSSG_IETFPE_STATE_UNKNOWN = 0,
+	ICSSG_IETFPE_STATE_INITIAL,
+	ICSSG_IETFPE_STATE_VERIFYING,
+	ICSSG_IETFPE_STATE_SUCCEEDED,
+	ICSSG_IETFPE_STATE_FAILED,
+	ICSSG_IETFPE_STATE_DISABLED
+};
+#endif /* __NET_TI_ICSSG_CONFIG_H */
diff --git a/drivers/net/ethernet/ti/icssg_ethtool.c b/drivers/net/ethernet/ti/icssg_ethtool.c
new file mode 100644
index 000000000000..fd09d223b0ae
--- /dev/null
+++ b/drivers/net/ethernet/ti/icssg_ethtool.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Texas Instruments ICSSG Ethernet driver
+ *
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#include "icssg_prueth.h"
+#include <linux/regmap.h>
+
+static u32 stats_base[] = {	0x54c,	/* Slice 0 stats start */
+				0xb18,	/* Slice 1 stats start */
+};
+
+struct miig_stats_regs {
+	/* Rx */
+	u32 rx_good_frames;
+	u32 rx_broadcast_frames;
+	u32 rx_multicast_frames;
+	u32 rx_crc_error_frames;
+	u32 rx_mii_error_frames;
+	u32 rx_odd_nibble_frames;
+	u32 rx_frame_max_size;
+	u32 rx_max_size_error_frames;
+	u32 rx_frame_min_size;
+	u32 rx_min_size_error_frames;
+	u32 rx_overrun_frames;
+	u32 rx_class0_hits;
+	u32 rx_class1_hits;
+	u32 rx_class2_hits;
+	u32 rx_class3_hits;
+	u32 rx_class4_hits;
+	u32 rx_class5_hits;
+	u32 rx_class6_hits;
+	u32 rx_class7_hits;
+	u32 rx_class8_hits;
+	u32 rx_class9_hits;
+	u32 rx_class10_hits;
+	u32 rx_class11_hits;
+	u32 rx_class12_hits;
+	u32 rx_class13_hits;
+	u32 rx_class14_hits;
+	u32 rx_class15_hits;
+	u32 rx_smd_frags;
+	u32 rx_bucket1_size;
+	u32 rx_bucket2_size;
+	u32 rx_bucket3_size;
+	u32 rx_bucket4_size;
+	u32 rx_64B_frames;
+	u32 rx_bucket1_frames;
+	u32 rx_bucket2_frames;
+	u32 rx_bucket3_frames;
+	u32 rx_bucket4_frames;
+	u32 rx_bucket5_frames;
+	u32 rx_total_bytes;
+	u32 rx_tx_total_bytes;
+	/* Tx */
+	u32 tx_good_frames;
+	u32 tx_broadcast_frames;
+	u32 tx_multicast_frames;
+	u32 tx_odd_nibble_frames;
+	u32 tx_underflow_errors;
+	u32 tx_frame_max_size;
+	u32 tx_max_size_error_frames;
+	u32 tx_frame_min_size;
+	u32 tx_min_size_error_frames;
+	u32 tx_bucket1_size;
+	u32 tx_bucket2_size;
+	u32 tx_bucket3_size;
+	u32 tx_bucket4_size;
+	u32 tx_64B_frames;
+	u32 tx_bucket1_frames;
+	u32 tx_bucket2_frames;
+	u32 tx_bucket3_frames;
+	u32 tx_bucket4_frames;
+	u32 tx_bucket5_frames;
+	u32 tx_total_bytes;
+};
+
+#define ICSSG_STATS(field)				\
+{							\
+	#field,						\
+	offsetof(struct miig_stats_regs, field),	\
+}
+
+struct icssg_stats {
+	char name[ETH_GSTRING_LEN];
+	u32 offset;
+};
+
+static const struct icssg_stats icssg_ethtool_stats[] = {
+	/* Rx */
+	ICSSG_STATS(rx_good_frames),
+	ICSSG_STATS(rx_broadcast_frames),
+	ICSSG_STATS(rx_multicast_frames),
+	ICSSG_STATS(rx_crc_error_frames),
+	ICSSG_STATS(rx_mii_error_frames),
+	ICSSG_STATS(rx_odd_nibble_frames),
+	ICSSG_STATS(rx_frame_max_size),
+	ICSSG_STATS(rx_max_size_error_frames),
+	ICSSG_STATS(rx_frame_min_size),
+	ICSSG_STATS(rx_min_size_error_frames),
+	ICSSG_STATS(rx_overrun_frames),
+	ICSSG_STATS(rx_class0_hits),
+	ICSSG_STATS(rx_class1_hits),
+	ICSSG_STATS(rx_class2_hits),
+	ICSSG_STATS(rx_class3_hits),
+	ICSSG_STATS(rx_class4_hits),
+	ICSSG_STATS(rx_class5_hits),
+	ICSSG_STATS(rx_class6_hits),
+	ICSSG_STATS(rx_class7_hits),
+	ICSSG_STATS(rx_class8_hits),
+	ICSSG_STATS(rx_class9_hits),
+	ICSSG_STATS(rx_class10_hits),
+	ICSSG_STATS(rx_class11_hits),
+	ICSSG_STATS(rx_class12_hits),
+	ICSSG_STATS(rx_class13_hits),
+	ICSSG_STATS(rx_class14_hits),
+	ICSSG_STATS(rx_class15_hits),
+	ICSSG_STATS(rx_smd_frags),
+	ICSSG_STATS(rx_bucket1_size),
+	ICSSG_STATS(rx_bucket2_size),
+	ICSSG_STATS(rx_bucket3_size),
+	ICSSG_STATS(rx_bucket4_size),
+	ICSSG_STATS(rx_64B_frames),
+	ICSSG_STATS(rx_bucket1_frames),
+	ICSSG_STATS(rx_bucket2_frames),
+	ICSSG_STATS(rx_bucket3_frames),
+	ICSSG_STATS(rx_bucket4_frames),
+	ICSSG_STATS(rx_bucket5_frames),
+	ICSSG_STATS(rx_total_bytes),
+	ICSSG_STATS(rx_tx_total_bytes),
+	/* Tx */
+	ICSSG_STATS(tx_good_frames),
+	ICSSG_STATS(tx_broadcast_frames),
+	ICSSG_STATS(tx_multicast_frames),
+	ICSSG_STATS(tx_odd_nibble_frames),
+	ICSSG_STATS(tx_underflow_errors),
+	ICSSG_STATS(tx_frame_max_size),
+	ICSSG_STATS(tx_max_size_error_frames),
+	ICSSG_STATS(tx_frame_min_size),
+	ICSSG_STATS(tx_min_size_error_frames),
+	ICSSG_STATS(tx_bucket1_size),
+	ICSSG_STATS(tx_bucket2_size),
+	ICSSG_STATS(tx_bucket3_size),
+	ICSSG_STATS(tx_bucket4_size),
+	ICSSG_STATS(tx_64B_frames),
+	ICSSG_STATS(tx_bucket1_frames),
+	ICSSG_STATS(tx_bucket2_frames),
+	ICSSG_STATS(tx_bucket3_frames),
+	ICSSG_STATS(tx_bucket4_frames),
+	ICSSG_STATS(tx_bucket5_frames),
+	ICSSG_STATS(tx_total_bytes),
+};
+
+static void emac_get_drvinfo(struct net_device *ndev,
+			     struct ethtool_drvinfo *info)
+{
+	struct prueth_emac *emac = netdev_priv(ndev);
+	struct prueth *prueth = emac->prueth;
+
+	strscpy(info->driver, dev_driver_string(prueth->dev),
+		sizeof(info->driver));
+	strscpy(info->bus_info, dev_name(prueth->dev), sizeof(info->bus_info));
+}
+
+static u32 emac_get_msglevel(struct net_device *ndev)
+{
+	struct prueth_emac *emac = netdev_priv(ndev);
+
+	return emac->msg_enable;
+}
+
+static void emac_set_msglevel(struct net_device *ndev, u32 value)
+{
+	struct prueth_emac *emac = netdev_priv(ndev);
+
+	emac->msg_enable = value;
+}
+
+static int emac_get_link_ksettings(struct net_device *ndev,
+				   struct ethtool_link_ksettings *ecmd)
+{
+	return phy_ethtool_get_link_ksettings(ndev, ecmd);
+}
+
+static int emac_set_link_ksettings(struct net_device *ndev,
+				   const struct ethtool_link_ksettings *ecmd)
+{
+	return phy_ethtool_set_link_ksettings(ndev, ecmd);
+}
+
+static int emac_get_eee(struct net_device *ndev, struct ethtool_eee *edata)
+{
+	if (!ndev->phydev)
+		return -EOPNOTSUPP;
+
+	return phy_ethtool_get_eee(ndev->phydev, edata);
+}
+
+static int emac_set_eee(struct net_device *ndev, struct ethtool_eee *edata)
+{
+	if (!ndev->phydev)
+		return -EOPNOTSUPP;
+
+	return phy_ethtool_set_eee(ndev->phydev, edata);
+}
+
+static int emac_nway_reset(struct net_device *ndev)
+{
+	return phy_ethtool_nway_reset(ndev);
+}
+
+static const char emac_ethtool_priv_flags[][ETH_GSTRING_LEN] = {
+#define EMAC_PRIV_IET_FRAME_PREEMPTION  BIT(0)
+	"iet-frame-preemption",
+#define EMAC_PRIV_IET_MAC_VERIFY                BIT(1)
+	"iet-mac-verify",
+};
Please move the #define outside of the array. They are not easy to
see.

	Andrew

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help