[PATCH v7 23/29] thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function
From: Daniel Lezcano <hidden>
Date: 2022-09-28 21:07:06
Also in:
linux-arm-msm, linux-omap, linux-pm, linux-renesas-soc, linux-samsung-soc, linux-tegra, lkml, platform-driver-x86
Subsystem:
the rest, thermal · Maintainers:
Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
The thermal framework gives the possibility to register the trip points with the thermal zone. When that is done, no get_trip_* ops are needed and they can be removed. Convert ops content logic into generic trip points and register them with the thermal zone. Signed-off-by: Daniel Lezcano <redacted> --- drivers/thermal/broadcom/bcm2835_thermal.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index 2c67841a1115..5485e59d03a9 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c@@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/thermal.h> +#include "../thermal_core.h" #include "../thermal_hwmon.h" #define BCM2835_TS_TSENSCTL 0x00
@@ -224,7 +225,8 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) */ val = readl(data->regs + BCM2835_TS_TSENSCTL); if (!(val & BCM2835_TS_TSENSCTL_RSTB)) { - int trip_temp, offset, slope; + struct thermal_trip trip; + int offset, slope; slope = thermal_zone_get_slope(tz); offset = thermal_zone_get_offset(tz);
@@ -232,7 +234,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) * For now we deal only with critical, otherwise * would need to iterate */ - err = tz->ops->get_trip_temp(tz, 0, &trip_temp); + err = thermal_zone_get_trip(tz, 0, &trip); if (err < 0) { dev_err(&pdev->dev, "Not able to read trip_temp: %d\n",
@@ -249,7 +251,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev) val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT); /* trip_adc value from info */ - val |= bcm2835_thermal_temp2adc(trip_temp, + val |= bcm2835_thermal_temp2adc(trip.temperature, offset, slope) << BCM2835_TS_TSENSCTL_THOLD_SHIFT;
--
2.34.1