[PATCH v7 14/29] thermal/drivers/armada: Use generic thermal_zone_get_trip() function
From: Daniel Lezcano <hidden>
Date: 2022-09-28 21:04:50
Also in:
linux-arm-msm, linux-omap, linux-pm, linux-renesas-soc, linux-samsung-soc, linux-tegra, lkml, platform-driver-x86
Subsystem:
marvell mvebu thermal driver, the rest, thermal · Maintainers:
Miquel Raynal, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano
The thermal framework gives the possibility to register the trip points with the thermal zone. When that is done, no get_trip_* ops are needed and they can be removed. Convert ops content logic into generic trip points and register them with the thermal zone. Signed-off-by: Daniel Lezcano <redacted> --- drivers/thermal/armada_thermal.c | 39 ++++++++++++++++---------------- 1 file changed, 20 insertions(+), 19 deletions(-)
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 52d63b3997fe..9444e5a22ca0 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c@@ -785,33 +785,34 @@ static int armada_configure_overheat_int(struct armada_thermal_priv *priv, int sensor_id) { /* Retrieve the critical trip point to enable the overheat interrupt */ - const struct thermal_trip *trips = of_thermal_get_trip_points(tz); + struct thermal_trip trip; int ret; int i; - if (!trips) - return -EINVAL; - - for (i = 0; i < of_thermal_get_ntrips(tz); i++) - if (trips[i].type == THERMAL_TRIP_CRITICAL) - break; + for (i = 0; i < thermal_zone_get_num_trips(tz); i++) { - if (i == of_thermal_get_ntrips(tz)) - return -EINVAL; + ret = thermal_zone_get_trip(tz, i, &trip); + if (ret) + return ret; + + if (trip.type != THERMAL_TRIP_CRITICAL) + continue; - ret = armada_select_channel(priv, sensor_id); - if (ret) - return ret; + ret = armada_select_channel(priv, sensor_id); + if (ret) + return ret; + + armada_set_overheat_thresholds(priv, trip.temperature, + trip.hysteresis); + priv->overheat_sensor = tz; + priv->interrupt_source = sensor_id; - armada_set_overheat_thresholds(priv, - trips[i].temperature, - trips[i].hysteresis); - priv->overheat_sensor = tz; - priv->interrupt_source = sensor_id; + armada_enable_overheat_interrupt(priv); - armada_enable_overheat_interrupt(priv); + return 0; + } - return 0; + return -EINVAL; } static int armada_thermal_probe(struct platform_device *pdev)
--
2.34.1