[PATCH 2/2] net: mt7531: ensure all MACs are powered down before reset
From: Alexander Couzens <lynxis@fe80.eu>
Date: 2022-08-20 22:00:31
Also in:
linux-mediatek, lkml
Subsystem:
mediatek switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Chester A. Unal, Daniel Golle, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
The datasheet [1] explicit describes it as requirement for a reset. [1] MT7531 Reference Manual for Development Board rev 1.0, page 735 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> --- drivers/net/dsa/mt7530.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 95a57aeb466e..409d5c3d76ea 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c@@ -2329,6 +2329,10 @@ mt7531_setup(struct dsa_switch *ds) return -ENODEV; } + /* all MACs must be forced link-down before sw reset */ + for (i = 0; i < MT7530_NUM_PORTS; i++) + mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK); + /* Reset the switch through internal reset */ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
--
2.35.1