Re: [PATCH net-next 1/4] net: dsa: ocelot: populate supported_interfaces
From: "Russell King (Oracle)" <linux@armlinux.org.uk>
Date: 2022-02-25 16:14:31
On Fri, Feb 25, 2022 at 04:06:36PM +0000, Russell King (Oracle) wrote:
quoted hunk ↗ jump to hunk
Populate the supported interfaces bitmap for the Ocelot DSA switches. Since all sub-drivers only support a single interface mode, defined by ocelot_port->phy_mode, we can handle this in the main driver code without reference to the sub-driver. Signed-off-by: Russell King (Oracle) <redacted> --- drivers/net/dsa/ocelot/felix.c | 10 ++++++++++ 1 file changed, 10 insertions(+)diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index 9959407fede8..88fbbd03c81b 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c@@ -778,6 +778,15 @@ static int felix_vlan_del(struct dsa_switch *ds, int port, return ocelot_vlan_del(ocelot, port, vlan->vid); } +static void felix_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct ocelot *ocelot = ds->priv; + + __set_bit(ocelot->ports[port].phy_mode,
Sorry, this should be ->phy_mode. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!