[PATCH net-next 1/4] net: dsa: ocelot: populate supported_interfaces
From: Russell King (Oracle) <hidden>
Date: 2022-02-25 16:06:45
Subsystem:
networking drivers, networking [dsa], ocelot ethernet switch driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Vladimir Oltean, Linus Torvalds
Populate the supported interfaces bitmap for the Ocelot DSA switches. Since all sub-drivers only support a single interface mode, defined by ocelot_port->phy_mode, we can handle this in the main driver code without reference to the sub-driver. Signed-off-by: Russell King (Oracle) <redacted> --- drivers/net/dsa/ocelot/felix.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 9959407fede8..88fbbd03c81b 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c@@ -778,6 +778,15 @@ static int felix_vlan_del(struct dsa_switch *ds, int port, return ocelot_vlan_del(ocelot, port, vlan->vid); } +static void felix_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct ocelot *ocelot = ds->priv; + + __set_bit(ocelot->ports[port].phy_mode, + config->supported_interfaces); +} + static void felix_phylink_validate(struct dsa_switch *ds, int port, unsigned long *supported, struct phylink_link_state *state)
@@ -1587,6 +1596,7 @@ const struct dsa_switch_ops felix_switch_ops = { .get_ethtool_stats = felix_get_ethtool_stats, .get_sset_count = felix_get_sset_count, .get_ts_info = felix_get_ts_info, + .phylink_get_caps = felix_phylink_get_caps, .phylink_validate = felix_phylink_validate, .phylink_mac_config = felix_phylink_mac_config, .phylink_mac_link_down = felix_phylink_mac_link_down,
--
2.30.2