[PATCH net 1/7] bnxt_en: Fix active FEC reporting to ethtool
From: Michael Chan <michael.chan@broadcom.com>
Date: 2022-02-20 09:06:21
Subsystem:
broadcom bnxt_en 50 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Michael Chan, Pavan Chebbi, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Somnath Kotur <redacted>
ethtool --show-fec <interface> does not show anything when the Active
FEC setting in the chip is set to None. Fix it to properly return
ETHTOOL_FEC_OFF in that case.
Fixes: 8b2775890ad8 ("bnxt_en: Report FEC settings to ethtool.")
Signed-off-by: Somnath Kotur <redacted>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 003330e8cd58..e195f4a669d8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c@@ -1969,6 +1969,9 @@ static int bnxt_get_fecparam(struct net_device *dev, case PORT_PHY_QCFG_RESP_ACTIVE_FEC_FEC_RS272_IEEE_ACTIVE: fec->active_fec |= ETHTOOL_FEC_LLRS; break; + case PORT_PHY_QCFG_RESP_ACTIVE_FEC_FEC_NONE_ACTIVE: + fec->active_fec |= ETHTOOL_FEC_OFF; + break; } return 0; }
--
2.18.1
Attachments
- smime.p7s [application/pkcs7-signature] 4209 bytes