Thread (20 messages) 20 messages, 4 authors, 2021-12-04

[PATCH net-next v2 7/8] net: phy: marvell10g: Use tabs instead of spaces for indentation

From: Marek Behún <kabel@kernel.org>
Date: 2021-11-23 16:41:03
Also in: linux-devicetree
Subsystem: ethernet phy library, marvell mv88x3310 phy driver, networking drivers, the rest · Maintainers: Andrew Lunn, Heiner Kallweit, Russell King, Marek Behún, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

Some register definitions were defined with spaces used for indentation.
Change them to tabs.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Russell King (Oracle) <redacted>
---
 drivers/net/phy/marvell10g.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index d289641190db..0cb9b4ef09c7 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -117,16 +117,16 @@ enum {
 	MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN	= 0x5,
 	MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH	= 0x6,
 	MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII			= 0x7,
-	MV_V2_PORT_INTR_STS     = 0xf040,
-	MV_V2_PORT_INTR_MASK    = 0xf043,
-	MV_V2_PORT_INTR_STS_WOL_EN      = BIT(8),
-	MV_V2_MAGIC_PKT_WORD0   = 0xf06b,
-	MV_V2_MAGIC_PKT_WORD1   = 0xf06c,
-	MV_V2_MAGIC_PKT_WORD2   = 0xf06d,
+	MV_V2_PORT_INTR_STS		= 0xf040,
+	MV_V2_PORT_INTR_MASK		= 0xf043,
+	MV_V2_PORT_INTR_STS_WOL_EN	= BIT(8),
+	MV_V2_MAGIC_PKT_WORD0		= 0xf06b,
+	MV_V2_MAGIC_PKT_WORD1		= 0xf06c,
+	MV_V2_MAGIC_PKT_WORD2		= 0xf06d,
 	/* Wake on LAN registers */
-	MV_V2_WOL_CTRL          = 0xf06e,
-	MV_V2_WOL_CTRL_CLEAR_STS        = BIT(15),
-	MV_V2_WOL_CTRL_MAGIC_PKT_EN     = BIT(0),
+	MV_V2_WOL_CTRL			= 0xf06e,
+	MV_V2_WOL_CTRL_CLEAR_STS	= BIT(15),
+	MV_V2_WOL_CTRL_MAGIC_PKT_EN	= BIT(0),
 	/* Temperature control/read registers (88X3310 only) */
 	MV_V2_TEMP_CTRL		= 0xf08a,
 	MV_V2_TEMP_CTRL_MASK	= 0xc000,
-- 
2.32.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help