[PATCH net-next v2 6/8] net: phy: marvell10g: Use generic macro for supported interfaces
STALE1763d
REVIEWED: 9 (8M)
From: Marek Behún <kabel@kernel.org>
Date: 2021-11-23 16:40:57
Also in:
linux-devicetree
Subsystem:
ethernet phy library, marvell mv88x3310 phy driver, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Russell King, Marek Behún, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v2 of 3 in this series; 2 review trailers (1 from subsystem maintainers).
Revisions (3)
- rfc [diff vs current]
- v1 [diff vs current]
- v2 current
Now that phy.h defines macro DECLARE_PHY_INTERFACE_MASK(), use it instead of DECLARE_BITMAP(). Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <redacted> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/phy/marvell10g.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index b6fea119fe13..d289641190db 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c@@ -148,7 +148,7 @@ struct mv3310_chip { }; struct mv3310_priv { - DECLARE_BITMAP(supported_interfaces, PHY_INTERFACE_MODE_MAX); + DECLARE_PHY_INTERFACE_MASK(supported_interfaces); u32 firmware_ver; bool has_downshift;
--
2.32.0