[net-next PATCH v3 07/13] net: dsa: qca8k: add explicit SGMII PLL enable
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2021-10-10 01:57:18
Also in:
linux-devicetree, lkml
Subsystem:
networking drivers, networking [dsa], the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Linus Torvalds
Support enabling PLL on the SGMII CPU port. Some device require this special configuration or no traffic is transmitted and the switch doesn't work at all. A dedicated binding is added to the CPU node port to apply the correct reg on mac config. Fail to correctly configure sgmii with qca8327 switch and warn if pll is used on qca8337 with a revision greater than 1. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- drivers/net/dsa/qca8k.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 043980a5db7f..b73b92ebd72e 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c@@ -1245,8 +1245,20 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, if (ret) return; - val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | - QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD; + val |= QCA8K_SGMII_EN_SD; + + if (of_property_read_bool(dp->dn, "qca,sgmii-enable-pll")) { + if (priv->switch_id == QCA8K_ID_QCA8327) { + dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling"); + return; + } + + if (priv->switch_revision < 2) + dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more."); + + val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | + QCA8K_SGMII_EN_TX; + } if (dsa_is_cpu_port(ds, port)) { /* CPU port, we're talking to the CPU MAC, be a PHY */
--
2.32.0