[net-next PATCH 02/13] drivers: net: phy: at803x: add DAC amplitude fix for 8327 phy
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2021-10-06 22:36:42
Also in:
linux-devicetree, lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
QCA8327 internal phy require DAC amplitude adjustement set to +6% with
100m speed. Also add additional define to report a change of the same
reg in QCA8337. (different scope it does set 1000m voltage)
Add link_change_notify function to set the proper amplitude adjustement
on PHY_RUNNING state and disable on any other state.
Fixes: c6bcec0d6928 ("net: phy: at803x: add support for qca 8327 A variant internal phy")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/net/phy/at803x.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 9090f384c29e..71237a4e85a3 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c@@ -87,6 +87,8 @@ #define AT803X_PSSR_MR_AN_COMPLETE 0x0200 #define AT803X_DEBUG_REG_0 0x00 +#define QCA8327_DEBUG_MANU_CTRL_EN BIT(2) +#define QCA8337_DEBUG_MANU_CTRL_EN GENMASK(3, 2) #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) #define AT803X_DEBUG_REG_5 0x05
@@ -1314,9 +1316,37 @@ static int qca83xx_config_init(struct phy_device *phydev) break; } + /* QCA8327 require DAC amplitude adjustment for 100m set to +6%. + * Disable on init and enable only with 100m speed following + * qca original source code. + */ + if (phydev->drv->phy_id == QCA8327_A_PHY_ID || + phydev->drv->phy_id == QCA8327_B_PHY_ID) + at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + return 0; } +static void qca83xx_link_change_notify(struct phy_device *phydev) +{ + /* QCA8337 doesn't require DAC Amplitude adjustement */ + if (phydev->drv->phy_id == QCA8337_PHY_ID) + return; + + /* Set DAC Amplitude adjustment to +6% for 100m on link running */ + if (phydev->state == PHY_RUNNING) { + if (phydev->speed == SPEED_100) + at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, + QCA8327_DEBUG_MANU_CTRL_EN, + QCA8327_DEBUG_MANU_CTRL_EN); + } else { + /* Reset DAC Amplitude adjustment */ + at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, + QCA8327_DEBUG_MANU_CTRL_EN, 0); + } +} + static int qca83xx_resume(struct phy_device *phydev) { int ret, val;
@@ -1471,6 +1501,7 @@ static struct phy_driver at803x_driver[] = { .phy_id_mask = QCA8K_PHY_ID_MASK, .name = "Qualcomm Atheros 8337 internal PHY", /* PHY_GBIT_FEATURES */ + .link_change_notify = qca83xx_link_change_notify, .probe = at803x_probe, .flags = PHY_IS_INTERNAL, .config_init = qca83xx_config_init,
@@ -1486,6 +1517,7 @@ static struct phy_driver at803x_driver[] = { .phy_id_mask = QCA8K_PHY_ID_MASK, .name = "Qualcomm Atheros 8327-A internal PHY", /* PHY_GBIT_FEATURES */ + .link_change_notify = qca83xx_link_change_notify, .probe = at803x_probe, .flags = PHY_IS_INTERNAL, .config_init = qca83xx_config_init,
@@ -1501,6 +1533,7 @@ static struct phy_driver at803x_driver[] = { .phy_id_mask = QCA8K_PHY_ID_MASK, .name = "Qualcomm Atheros 8327-B internal PHY", /* PHY_GBIT_FEATURES */ + .link_change_notify = qca83xx_link_change_notify, .probe = at803x_probe, .flags = PHY_IS_INTERNAL, .config_init = qca83xx_config_init,
--
2.32.0