[PATCH net-next v2] net: phy: at803x: add support for qca 8327 internal phy
flat view
STALE1863d
REVIEWED: 1 (0M)
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: 2021-09-14 12:34:54
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
1 review trailer.
Add support for qca8327 internal phy needed for correct init of the switch port. It does use the same qca8337 function and reg just with a different id. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Rosen Penev <redacted> --- drivers/net/phy/at803x.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index bdac087058b2..719860a93d7c 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c@@ -1420,6 +1420,19 @@ static struct phy_driver at803x_driver[] = { .get_sset_count = at803x_get_sset_count, .get_strings = at803x_get_strings, .get_stats = at803x_get_stats, +}, { + /* QCA8327 */ + .phy_id = QCA8327_PHY_ID, + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "QCA PHY 8327", + /* PHY_GBIT_FEATURES */ + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, + .soft_reset = genphy_soft_reset, + .get_sset_count = at803x_get_sset_count, + .get_strings = at803x_get_strings, + .get_stats = at803x_get_stats, }, }; module_phy_driver(at803x_driver);
@@ -1430,6 +1443,8 @@ static struct mdio_device_id __maybe_unused atheros_tbl[] = { { PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) }, { PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) }, { PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) }, + { PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) }, + { PHY_ID_MATCH_EXACT(QCA8327_PHY_ID) }, { } };
--
2.32.0