Re: [PATCHv1 0/3] Add Reset controller to Ethernet PHY

[PATCHv1 0/3] Add Reset controller to Ethernet PHY · Anand Moon <hidden> · 2021-07-29
[PATCHv1 1/3] arm64: dts: amlogic: add missing ethernet reset ID · Anand Moon <hidden> · 2021-07-29
Re: [PATCHv1 1/3] arm64: dts: amlogic: add missing ethernet reset ID · Philipp Zabel <p.zabel@pengutronix.de> · 2021-07-30
[PATCHv1 2/3] ARM: dts: meson: Use new reset id for reset controller · Anand Moon <hidden> · 2021-07-29
Re: [PATCHv1 2/3] ARM: dts: meson: Use new reset id for reset controller · Philipp Zabel <p.zabel@pengutronix.de> · 2021-07-30
Re: [PATCHv1 2/3] ARM: dts: meson: Use new reset id for reset controller · Anand Moon <hidden> · 2021-07-30
[PATCHv1 3/3] net: stmmac: dwmac-meson8b: Add reset controller for ethernet phy · Anand Moon <hidden> · 2021-07-29
Re: [PATCHv1 3/3] net: stmmac: dwmac-meson8b: Add reset controller for ethernet phy · Andrew Lunn <andrew@lunn.ch> · 2021-07-29
Re: [PATCHv1 3/3] net: stmmac: dwmac-meson8b: Add reset controller for ethernet phy · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-03
Re: [PATCHv1 0/3] Add Reset controller to Ethernet PHY · Martin Blumenstingl <martin.blumenstingl@googlemail.com> · 2021-08-03

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: 2021-08-03 20:41:24
Also in: linux-amlogic, linux-arm-kernel, linux-devicetree, lkml

Hi Anand,

On Thu, Jul 29, 2021 at 10:11 PM Anand Moon [off-list ref] wrote:

It is being observed some time the Ethernet interface
will not send / recive any packet after reboot.

Earlier I had submitted Ethernet reset ID patch
but it did not resolve it issue much, Adding new
reset controller of the Ethernet PHY for Amlogic SoC
could help resolve the issue.

nowhere in this series you are addressing the issue from [0]
Some more comments in the individual patch


Best regards,
Martin


[0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm64/boot/dts/amlogic?id=19f6fe976a61f9afc289b062b7ef67f99b72e7b9

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help