Thread (3 messages) flat view 3 messages, 2 authors, 2021-09-15
STALE1801d REVIEWED: 1 (0M)

1 review trailer.

[PATCH net] i40e: fix endless loop under rtnl

From: Jiri Benc <hidden>
Date: 2021-08-30 10:35:08
Subsystem: intel ethernet drivers, networking drivers, the rest · Maintainers: Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

The loop in i40e_get_capabilities can never end. The problem is that
although i40e_aq_discover_capabilities returns with an error if there's
a firmware problem, the returned error is not checked. There is a check for
pf->hw.aq.asq_last_status but that value is set to I40E_AQ_RC_OK on most
firmware problems.

When i40e_aq_discover_capabilities encounters a firmware problem, it will
enocunter the same problem on its next invocation. As the result, the loop
becomes endless. We hit this with I40E_ERR_ADMIN_QUEUE_TIMEOUT but looking
at the code, it can happen with a range of other firmware errors.

I don't know what the correct behavior should be: whether the firmware
should be retried a few times, or whether pf->hw.aq.asq_last_status should
be always set to the encountered firmware error (but then it would be
pointless and can be just replaced by the i40e_aq_discover_capabilities
return value). However, the current behavior with an endless loop under the
rtnl mutex(!) is unacceptable and Intel has not submitted a fix, although we
explained the bug to them 7 months ago.

This may not be the best possible fix but it's better than hanging the whole
system on a firmware bug.

Tested-by: Stefan Assmann <redacted>
Signed-off-by: Jiri Benc <redacted>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 1d1f52756a93..772dd05a0ae8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10110,7 +10110,7 @@ static int i40e_get_capabilities(struct i40e_pf *pf,
 		if (pf->hw.aq.asq_last_status == I40E_AQ_RC_ENOMEM) {
 			/* retry with a larger buffer */
 			buf_len = data_size;
-		} else if (pf->hw.aq.asq_last_status != I40E_AQ_RC_OK) {
+		} else if (pf->hw.aq.asq_last_status != I40E_AQ_RC_OK || err) {
 			dev_info(&pf->pdev->dev,
 				 "capability discovery failed, err %s aq_err %s\n",
 				 i40e_stat_str(&pf->hw, err),
-- 
2.18.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help