[net PATCH 04/10] octeontx2-pf: Don't mask out supported link modes
From: Sunil Goutham <sgoutham@marvell.com>
Date: 2021-08-22 12:02:57
Subsystem:
marvell octeontx2 physical function driver, networking drivers, the rest · Maintainers:
Sunil Goutham, Geetha sowjanya, Ratheesh Kannoth, Subbaraya Sundeep, Bharat Bhushan, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Hariprasad Kelam <redacted> Supported link modes are updated by firmware in shared structure per interface. Kernel uses this value to display supported link modes via ethtool. Currently there is extra validation that firmware updated modes are validated against internal list of supported modes. As intenal list of supported modes are not updated frequently new modes supported by firmware are not updated to ethtool. Hence remove extra validation and report all firmware updated modes. Signed-off-by: Hariprasad Kelam <redacted> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index b906a0e..b90decf 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c@@ -33,9 +33,6 @@ struct otx2_stat { .index = offsetof(struct otx2_dev_stats, stat) / sizeof(u64), \ } -/* Physical link config */ -#define OTX2_ETHTOOL_SUPPORTED_MODES 0x638CCBF //110001110001100110010111111 - enum link_mode { OTX2_MODE_SUPPORTED, OTX2_MODE_ADVERTISED
@@ -1116,8 +1113,6 @@ static void otx2_get_link_mode_info(u64 link_mode_bmap, }; u8 bit; - link_mode_bmap = link_mode_bmap & OTX2_ETHTOOL_SUPPORTED_MODES; - for_each_set_bit(bit, (unsigned long *)&link_mode_bmap, 27) { /* SGMII mode is set */ if (bit == 0)
--
2.7.4