Hi Loic,
On Mon, Jun 21, 2021 at 10:28 AM Loic Poulain [off-list ref] wrote:
On Sun, 20 Jun 2021 at 16:39, Sergey Ryazanov [off-list ref] wrote:
quoted
On Tue, Jun 15, 2021 at 10:24 AM Loic Poulain [off-list ref] wrote:
quoted
On Tue, 15 Jun 2021 at 02:30, Sergey Ryazanov [off-list ref] wrote:
quoted
The WWAN core not only multiplex the netdev configuration data, but
process it too, and needs some space to store its private data
associated with the netdev. Add a structure to keep common WWAN core
data. The structure will be stored inside the netdev private data before
WWAN driver private data and have a field to make it easier to access
the driver data. Also add a helper function that simplifies drivers
access to their data.
Would it be possible to store wwan_netdev_priv at the end of priv data instead?
That would allow drivers to use the standard netdev_priv without any change.
And would also simplify forwarding to rmnet (in mhi_net) since rmnet
uses netdev_priv.
I do not think that mimicking something by one subsystem for another
is generally a good idea. This could look good in a short term, but
finally it will become a headache due to involvement of too many
entities.
IMHO, a suitable approach to share the rmnet library and data
structures among drivers is to make the rmnet interface more generic.
E.g. consider such netdev/rtnl specific function:
static int rmnet_foo_action(struct net_device *dev, ...)
{
struct rmnet_priv *rmdev = netdev_priv(dev);
<do a foo action here>
}
It could be split into a wrapper and an actual handler:
int __rmnet_foo_action(struct rmnet_priv *rmdev, ...)
{
<do a foo action here>
}
EXPORT_GPL(__rmnet_foo_action)
static int rmnet_foo_action(struct net_device *dev, ...)
{
struct rmnet_priv *rmdev = netdev_priv(dev);
return __rmnet_foo_action(rmdev, ...)
}
So a call from mhi_net to rmnet could looks like this:
static int mhi_net_foo_action(struct net_device *dev, ...)
{
struct rmnet_priv *rmdev = wwan_netdev_drvpriv(dev);
return __rmnet_foo_action(rmdev, ...)
}
In such a way, only the rmnet users know something special, while
other wwan core users and the core itself behave without any
surprises. E.g. any regular wwan core minidriver can access the
link_id field of the wwan common data by calling netdev_priv() without
further calculating the common data offset.
Yes, that would work, but it's an important refactoring since rmnet is
all built around the idea that netdev_priv is rmnet_priv, including rx
path (netdev_priv(skb->dev)).
My initial tests were based on this 'simple' change:
https://git.linaro.org/people/loic.poulain/linux.git/commit/?h=wwan_rmnet&id=6308d49790f10615bd33a38d56bc7f101646558f
Moreover, a driver like mhi_net also supports non WWAN local link
(called mhi_swip), which is a network link between the host and the
modem cpu (for modem hosted services...). This link is not managed by
the WWAN layer and is directly created by mhi_net. I could create a
different driver or set of handlers for this netdev, but it's
additional complexity.
Correct me if I am wrong. I just checked the rmnet code and realized
that rmnet should work on top of mhi_net and not vice versa. mhi_net
should provide some kind of transportation for QMAP packets from a HW
device to rmnet. Then rmnet will perform demultiplexing, deaggregation
and decapsulation of QMAP packets to pure IP packets.
rmnet itself receives these QMAP packets via a network device. So any
driver that would like to provide the QMAP transport for rmnet should
create a network device for this task.
The main issue with the integration of mhi_net with the wwan is that
the mhi_net driver should pass its traffic through the rmnet demuxer.
While the network device that will be created by the rmnet demuxer
will not be a child of a MHI device or a wwan device. So to properly
integrate the mhi_net driver with the wwan core netdev capabilities,
you should begin to use rmnet not as an independent demux created on
top of a transport network interface, but as a library. Am I correctly
understanding?
Does the same issue appear when we begin a more tight integration of
the qmi_wwan USB driver with the wwan core?
I would like to say that one way or another, rmnet will be converted
to a quite abstract library that should avoid direct access to the
network device private data.
quoted
quoted
quoted
At the moment we use the common WWAN private data to store the WWAN data
link (channel) id at the time the link is created, and report it back to
user using the .fill_info() RTNL callback. This should help the user to
be aware which network interface is binded to which WWAN device data
channel.
I wonder if it would not be simpler to store the link ID into
netdev->dev_port, it's after all a kind of virtual/logical port.
That would only postpone the introduction of a wwan_netdev_priv struct though.
I like this idea. This is likely to solve the link id storage problem.
But only if we plan to never extend the wwan core private data.
Otherwise, as you mention, this only postpones the wwan data structure
introduction to a moment when we will need to rework a lot of drivers.
Looks like we have no absolutely good solution. Only a set of
proposals, each which has its own shortcomings :(
--
Sergey