Re: [PATCH v2] net: phy: add Maxlinear GPY115/21x/24x driver

On Sat, Jun 05, 2021 at 03:46:18AM +0000, Liang Xu wrote:

On 5/6/2021 4:39 am, Andrew Lunn wrote:

quoted

This email was sent from outside of MaxLinear.


On Fri, Jun 04, 2021 at 12:52:02PM +0000, Liang Xu wrote:

quoted

On 4/6/2021 8:15 pm, Andrew Lunn wrote:

quoted

This email was sent from outside of MaxLinear.

quoted

+config MXL_GPHY
+     tristate "Maxlinear PHYs"
+     help
+       Support for the Maxlinear GPY115, GPY211, GPY212, GPY215,
+       GPY241, GPY245 PHYs.

Do these PHYs have unique IDs in register 2 and 3? What is the format
of these IDs?

The OUI is fixed. But often the rest is split into two. The higher
part indicates the product, and the lower part is the revision. We
then have a struct phy_driver for each product, and the mask is used
to match on all the revisions of the product.

       Andrew

Register 2, Register 3 bit 10~15 - OUI

Register 3 bit 4~9 - product number

Register 3 bit 0~3 - revision number

These PHYs have same ID and no difference OUI, product number, revision 
number.

Are you saying GPY115, GPY211, GPY212, GPY215, GPY241, GPY245 all have
the same product number?

Normally, each PHY has its own product ID, and so we have:

/* Vitesse 82xx */
static struct phy_driver vsc82xx_driver[] = {
{
        .phy_id         = PHY_ID_VSC8234,
        .name           = "Vitesse VSC8234",
        .phy_id_mask    = 0x000ffff0,
        /* PHY_GBIT_FEATURES */
        .config_init    = &vsc824x_config_init,
        .config_aneg    = &vsc82x4_config_aneg,
        .config_intr    = &vsc82xx_config_intr,
        .handle_interrupt = &vsc82xx_handle_interrupt,
}, {
        .phy_id         = PHY_ID_VSC8244,
        .name           = "Vitesse VSC8244",
        .phy_id_mask    = 0x000fffc0,
        /* PHY_GBIT_FEATURES */
        .config_init    = &vsc824x_config_init,
        .config_aneg    = &vsc82x4_config_aneg,
        .config_intr    = &vsc82xx_config_intr,
        .handle_interrupt = &vsc82xx_handle_interrupt,
}, {
        .phy_id         = PHY_ID_VSC8572,
        .name           = "Vitesse VSC8572",
        .phy_id_mask    = 0x000ffff0,
        /* PHY_GBIT_FEATURES */
        .config_init    = &vsc824x_config_init,
        .config_aneg    = &vsc82x4_config_aneg,
        .config_intr    = &vsc82xx_config_intr,
        .handle_interrupt = &vsc82xx_handle_interrupt,
}, {

one entry to describe one PHY.

    Andrew