Thread (24 messages) 24 messages, 5 authors, 2021-06-10

[PATCH net-next v3 8/9] net: dsa: dsa_slave_phy_connect(): extend phy's flags with port specific phy flags

flat view
STALE1949d SUPERSEDED

From: Oleksij Rempel <o.rempel@pengutronix.de>
Date: 2021-05-26 04:30:58
Also in: lkml
Subsystem: ethernet phy library, networking drivers, networking [dsa], networking [general], sff/sfp/sfp+ module support, the rest · Maintainers: Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Russell King, Linus Torvalds

Revision v3 of 3 in this series.

Revisions (3)
  1. v3 current
  2. v4 [diff vs current]
  3. v5 [diff vs current]
This patch extends the flags of the phy that's being connected with the
port specific flags of the switch port.

This is needed to handle a port specific erratum of the KSZ8873 switch,
which is added in a later patch.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/phy/phylink.c | 2 +-
 net/dsa/slave.c           | 4 ++++
 2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 96d8e88b4e46..167c2277814f 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1029,7 +1029,7 @@ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
 	if (pl->phydev)
 		return -EBUSY;
 
-	return phy_attach_direct(pl->netdev, phy, 0, interface);
+	return phy_attach_direct(pl->netdev, phy, phy->dev_flags, interface);
 }
 
 /**
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 8c0f3c6ab365..7e208f16f006 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1758,6 +1758,10 @@ static int dsa_slave_phy_connect(struct net_device *slave_dev, int addr)
 		return -ENODEV;
 	}
 
+	if (ds->ops->get_phy_flags)
+		slave_dev->phydev->dev_flags |=
+			ds->ops->get_phy_flags(ds, dp->index);
+
 	return phylink_connect_phy(dp->pl, slave_dev->phydev);
 }
 
-- 
2.29.2
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help