Re: [PATCH net-next v4 0/5] Support for the IOAM Pre-allocated Trace with IPv6

On Thu, 27 May 2021 17:16:47 +0200 Justin Iurman wrote:

quoted

In-situ Operations, Administration, and Maintenance (IOAM) records
operational and telemetry information in a packet while it traverses
a path between two points in an IOAM domain. It is defined in
draft-ietf-ippm-ioam-data [1]. IOAM data fields can be encapsulated
into a variety of protocols. The IPv6 encapsulation is defined in
draft-ietf-ippm-ioam-ipv6-options [2], via extension headers. IOAM
can be used to complement OAM mechanisms based on e.g. ICMP or other
types of probe packets.

This patchset implements support for the Pre-allocated Trace, carried
by a Hop-by-Hop. Therefore, a new IPv6 Hop-by-Hop TLV option is
introduced, see IANA [3]. The three other IOAM options are not included
in this patchset (Incremental Trace, Proof-of-Transit and Edge-to-Edge).
The main idea behind the IOAM Pre-allocated Trace is that a node
pre-allocates some room in packets for IOAM data. Then, each IOAM node
on the path will insert its data. There exist several interesting use-
cases, e.g. Fast failure detection/isolation or Smart service selection.
Another killer use-case is what we have called Cross-Layer Telemetry,
see the demo video on its repository [4], that aims to make the entire
stack (L2/L3 -> L7) visible for distributed tracing tools (e.g. Jaeger),
instead of the current L5 -> L7 limited view. So, basically, this is a
nice feature for the Linux Kernel.

Some coding comments from me. Please continue the discussion with David
re: maturity of the RFC and make sure to CC him and Yoshifuji on next
versions.

I'll do that. Thanks again for your review.

Justin