Most of these changes come from OpenWrt where they have been present and
tested for months.

First three patches are bug fixes. The rest are performance
improvements. The last patch is a cleanup to use the iopoll.h macro for
busy-waiting instead of a custom loop.

Source: 770-*.patch at https://git.openwrt.org/?p=openwrt/openwrt.git;a=tree;f=target/linux/generic/pending-5.10;hb=HEAD

Felix Fietkau (12):
  net: ethernet: mtk_eth_soc: fix RX VLAN offload
  net: ethernet: mtk_eth_soc: unmap RX data before calling build_skb
  net: ethernet: mtk_eth_soc: use napi_consume_skb
  net: ethernet: mtk_eth_soc: reduce MDIO bus access latency
  net: ethernet: mtk_eth_soc: remove unnecessary TX queue stops
  net: ethernet: mtk_eth_soc: use larger burst size for QDMA TX
  net: ethernet: mtk_eth_soc: increase DMA ring sizes
  net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation
  net: ethernet: mtk_eth_soc: cache HW pointer of last freed TX
    descriptor
  net: ethernet: mtk_eth_soc: only read the full RX descriptor if DMA is
    done
  net: ethernet: mtk_eth_soc: reduce unnecessary interrupts
  net: ethernet: mtk_eth_soc: set PPE flow hash as skb hash if present

Ilya Lipnitskiy (2):
  net: ethernet: mtk_eth_soc: fix build_skb cleanup
  net: ethernet: mtk_eth_soc: use iopoll.h macro for DMA init

 drivers/net/ethernet/mediatek/Kconfig       |   1 +
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 228 ++++++++++++++------
 drivers/net/ethernet/mediatek/mtk_eth_soc.h |  52 ++++-
 3 files changed, 199 insertions(+), 82 deletions(-)

-- 
2.31.1