Re: [PATCH v2 4/6] phy: phy-can-transceiver: Add support for generic CAN transceiver driver

--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig

@@ -61,6 +61,15 @@ config USB_LGM_PHY
 	  interface to interact with USB GEN-II and USB 3.x PHY that is part
 	  of the Intel network SOC.
 
+config PHY_CAN_TRANSCEIVER
+	tristate "CAN transceiver PHY"
+	select GENERIC_PHY
+	help
+	  This option enables support for CAN transceivers as a PHY. This
+	  driver provides function for putting the transceivers in various
+	  functional modes using gpios and sets the attribute max link
+	  rate, for mcan drivers.
+
 source "drivers/phy/allwinner/Kconfig"
 source "drivers/phy/amlogic/Kconfig"
 source "drivers/phy/broadcom/Kconfig"

diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index adac1b1a39d1..9c66101c9605 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_PHY_LPC18XX_USB_OTG)	+= phy-lpc18xx-usb-otg.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
 obj-$(CONFIG_USB_LGM_PHY)		+= phy-lgm-usb.o
+obj-$(CONFIG_PHY_CAN_TRANSCEIVER)	+= phy-can-transceiver.o
 obj-y					+= allwinner/	\
 					   amlogic/	\
 					   broadcom/	\